CEN ISO/TS 12813:2009
(Main)Electronic fee collection - Compliance check communication for autonomous systems (ISO/TS 12813:2009)
Electronic fee collection - Compliance check communication for autonomous systems (ISO/TS 12813:2009)
ISO/TS 12813:2009 defines requirements for short-range communication for the purposes of compliance checking in autonomous electronic fee-collecting (EFC) systems. Compliance checking communication (CCC) takes place between a road vehicle's on-board equipment (OBE) and an outside interrogator (road-side mounted equipment, mobile device or hand‑held unit), and serves to establish whether the data that are delivered by the OBE correctly reflect the road usage of the corresponding vehicle according to the rules of the pertinent toll regime.
The operator of the compliance checking interrogator is assumed to be part of the toll charging role as defined in ISO 17573. The CCC permits identification of the OBE, vehicle and contract, and verification of whether the driver has fulfilled his obligations and the checking status and performance of the OBE. The CCC reads, but does not write, OBE data.
ISO/TS 12813:2009 is applicable to OBE in an autonomous mode of operation; it is not applicable to compliance checking in dedicated short-range communication (DSRC)-based charging systems. It defines data syntax and semantics, but does not define a communication sequence. All the attributes defined herein are required in any OBE claimed to be compliant with ISO/TS 12813:2009, even if some values are set to “not defined” in cases where a certain functionality is not present in an OBE. The interrogator is free to choose which attributes are read, as well as the sequence in which they are read. In order to achieve compatibility with existing systems, the communication makes use of the attributes defined in ISO 14906 wherever possible.
The CCC is suitable for a range of short‑range communication media. Specific definitions are given for the CEN DSRC specified in EN 15509, as well as for the use of ISO CALM IR, UNI DSRC and ARIB DSRC as alternatives to the CEN DSRC. The attributes and functions defined are for compliance checking by means of the DSRC communication services provided by DSRC layer 7, with the CCC attributes and functions made available to the CCC applications at the road-side equipment (RSE) and OBE. The attributes and functions are defined on the level of ADU (application data units).
Test specifications are not within the scope of ISO/TS 12813:2009.
Elektronische Gebührenerhebung - Kommunikation zur Übereinstimmungsprüfung für autonome Systeme
Perception dutélépéage - Communication de contrôle de conformité pour systèmes autonomes (ISO/TS 12813:2009)
Elektronsko pobiranje pristojbin - Komunikacija za potrditev skladnosti avtonomnih sistemov (ISO/TS 12813:2009)
Ta tehnična specifikacija določa zahteve komunikacije kratkega dosega za namene preverjanja skladnosti avtonomnih elektronskih sistemov za pobiranje plačil (EFC). Preverjanje skladnosti komunikacije (CCC) se izvaja med vgrajeno opremo v cestnem vozilu (OBE) in zunanjim spraševalcem (oprema nameščena na robu cestišča, mobilna naprava ali ročna naprava) in služi temu, da ugotovi, ali podatki, ki so oddani iz OBE, pravilno odsevajo uporabo cestišča ustreznega vozila, skladno z navodili pristojnega režima cestnin. Operaterja spraševalca, ki preverja skladnost, je potrebno obravnavati kot del vloge zaračunavanja cestnin, kot je to določeno v ISO 17573. CCC dovoljuje identifikacijo OBE, vozila in pogodbe, ter verifikacijo, ali je voznik izpolnil svoje obveznosti in status preverjanja in delovanja OBE. CCC bere, vendar ne piše podatkov OBE. Ta tehnična specifikacija velja za OBE v avtonomnem načinu delovanja; ne velja za preverjanje skladnosti v namenskih, na DSRC osnovanih sistemih za zaračunavanje, ki uporabljajo komunikacijo kratkega dosega. Določa sintakso in semantiko podatkov, vendar ne določa zaporedje komunikacije. Vsi atributi v nadaljevanju so potrebni v vsaki OBE, za katero velja, da je v skladu s temi tehničnimi specifikacijami, tudi če so nekatere vrednosti v primerih, kjer določena funkcionalnost ni prisotna v OBE, nastavljene na »neopredeljeno«. Spraševalec prosto izbira, kateri atributi se berejo, kot tudi zaporedje, v katerem se berejo. Z namenom doseganja kompatibilnosti z obstoječimi sistemi se pri komunikaciji uporabljajo, kadar koli je mogoče, atributi, opredeljeni v ISO 14906. CCC je primeren za razpon medijev, ki uporabljajo komunikacijo kratkega dosega. Posebne definicije so dane za CEN-DSRC in so navedene v IN 15509, kot tudi uporaba ISO CALM IR, UNI DSRC in ARIB DSRC kot druge možnosti za CEN-DSRC. Opredeljeni atributi in funkcije so za preverjanje skladnosti z uporabo DSRC komunikacijskih servisov, ki jih zagotavlja 7. plast DSRC, z CCC atributi in funkcijami, ki so na voljo CCC aplikacijam v opremi na robu cestišč (RSE) in OBE. Atributi in funkcije so določeni na nivoju ADU (aplikativne podatkovne enote).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 12813:2010
01-januar-2010
Elektronsko pobiranje pristojbin - Komunikacija za potrditev skladnosti
avtonomnih sistemov (ISO/TS 12813:2009)
Electronic fee collection - Compliance check communication for autonomoussystems
(ISO/TS 12813:2009)
Perception dutélépéage - Communication de contrôle de conformité pour
systèmesautonomes (ISO/TS 12813:2009)
Ta slovenski standard je istoveten z: CEN ISO/TS 12813:2009
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN ISO/TS 12813:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN ISO/TS 12813:2010
---------------------- Page: 2 ----------------------
SIST-TS CEN ISO/TS 12813:2010
TECHNICAL SPECIFICATION
CEN ISO/TS 12813
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
November 2009
ICS 35.240.60; 03.220.20
English Version
Electronic fee collection - Compliance check communication for
autonomous systems (ISO/TS 12813:2009)
Perception dutélépéage - Communication de contrôle de
conformité pour systèmes autonomes (ISO/TS
12813:2009)
This Technical Specification (CEN/TS) was approved by CEN on 15 September 2009 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 12813:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN ISO/TS 12813:2010
CEN ISO/TS 12813:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST-TS CEN ISO/TS 12813:2010
CEN ISO/TS 12813:2009 (E)
Foreword
This document (CEN ISO/TS 12813:2009) has been prepared by Technical Committee CEN/TC 278 "Road
transport and traffic telematics", the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 204 "Intelligent transport systems".
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
3
---------------------- Page: 5 ----------------------
SIST-TS CEN ISO/TS 12813:2010
---------------------- Page: 6 ----------------------
SIST-TS CEN ISO/TS 12813:2010
TECHNICAL ISO/TS
SPECIFICATION 12813
First edition
2009-11-15
Electronic fee collection — Compliance
check communication for autonomous
systems
Perception du télépéage — Communication de contrôle de conformité
pour systèmes autonomes
Reference number
ISO/TS 12813:2009(E)
©
ISO 2009
---------------------- Page: 7 ----------------------
SIST-TS CEN ISO/TS 12813:2010
ISO/TS 12813:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.