EN 10217-1:2019/FprA1

Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties

This document specifies the technical delivery conditions for qualities TR1 and TR2 of electric welded and submerged arc welded tubes of circular cross section, with specified room temperature properties, made from non-alloy quality steel.
NOTE 1   Quality TR2 is intended to support the essential requirements of EU Directive 2014/68/EU in respect of pressure equipment with specified room temperature properties (see Table 5).
NOTE 2   Once this standard is published in the Official Journal of the European Union (OJEU), presumption of conformity to the Essential Safety Requirements (ESR) of Directive 2014/68/EU is limited to the technical data for the materials in this standard and does not presume adequacy of the material for a specific item of pressure equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of a specific item of equipment to verify that the ESRs of the Pressure Equipment Directive are satisfied, needs to be done by the designer or manufacturer of the pressure equipment, taking also into account any subsequent processing procedures which may affect properties of the base materials.

Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Elektrisch geschweißte und unterpulvergeschweißte Rohre aus unlegierten Stählen mit festgelegten Eigenschaften bei Raumtemperatur

Tubes soudés en acier pour service sous pression - Conditions techniques de livraison - Partie 1 : Tubes en acier non allié, soudés électrique et soudés à l'arc sous flux, avec caractéristiques spécifiées à température ambiante

Varjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 1. del: Električno varjene in obločno pod praškom varjene nelegirane jeklene cevi s specificiranimi lastnostmi za delo pri sobni temperaturi - Dopolnilo A1

General Information

• Status: Not Published
• Publication Date: 06-Jun-2024
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 110/WG 1 - Tubes for pressure purposes
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 16-May-2024
• Due Date: 14-Jun-2024
• Completion Date: 16-May-2024
• Directive: 2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Mandate: M/601 - COMMISSION IMPLEMENTING DECISION of 1.3.2024 on a standardisation request to the European Committee for Standardization and the European Committee for Electrotechnical Standardization as regards pressure equipment and assemblies in support of Directive 2014/68/EU of the European Parliament and of the Council
• Ref Project: SIST EN 10217-1:2019/oprA1:2023 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties

Relations

• Amends: EN 10217-1:2019 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
• Effective Date: 27-Jan-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2023
Varjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 1. del: Električno
varjene in obločno pod praškom varjene nelegirane jeklene cevi s specificiranimi
lastnostmi za delo pri sobni temperaturi - Dopolnilo A1
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1:
Electric welded and submerged arc welded non-alloy steel tubes with specified room
temperature properties
Geschweißte Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen -
Teil 1: Elektrisch geschweißte und unterpulvergeschweißte Rohre aus unlegierten
Stählen mit festgelegten Eigenschaften bei Raumtemperatur
Tubes soudés en acier pour service sous pression - Conditions techniques de livraison -
Partie 1 : Tubes en acier non allié, soudés électriquement et soudés à l'arc immergé,
avec caractéristiques spécifiées à température ambiante
Ta slovenski standard je istoveten z: EN 10217-1:2019/prA1
ICS:
23.020.32 Tlačne posode Pressure vessels
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 10217-1:2019
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
January 2023
ICS 23.040.10; 77.140.75
English Version
Welded steel tubes for pressure purposes - Technical
delivery conditions - Part 1: Electric welded and
submerged arc welded non-alloy steel tubes with specified
room temperature properties
Tubes soudés en acier pour service sous pression - Geschweißte Stahlrohre für Druckbeanspruchungen -
Conditions techniques de livraison - Partie 1 : Tubes en Technische Lieferbedingungen - Teil 1: Elektrisch
acier non allié, soudés électriquement et soudés à l'arc geschweißte und unterpulvergeschweißte Rohre aus
immergé, avec caractéristiques spécifiées à unlegierten Stählen mit festgelegten Eigenschaften bei
température ambiante Raumtemperatur
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC
459/SC 10.
This draft amendment A1, if approved, will modify the European Standard EN 10217-1:2019. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10217-1:2019/prA1:2023 E
worldwide for CEN national Members.

EN 10217-1:2019/prA1:2023 (E)
Contents Page
European foreword .
...