EN ISO 13786:2017
(Main)Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017, Corrected version 2018-03)
Thermal performance of building components - Dynamic thermal characteristics - Calculation methods (ISO 13786:2017, Corrected version 2018-03)
ISO 13786:2017 specifies the characteristics related to the dynamic thermal behaviour of a complete building component and provides methods for their calculation. It also specifies the information on building materials required for the use of the building component. Since the characteristics depend on the way materials are combined to form building components, ISO 13786:2017 is not applicable to building materials or to unfinished building components.
The definitions given in ISO 13786:2017 are applicable to any building component. A simplified calculation method is provided for plane components consisting of plane layers of substantially homogeneous building materials.
Annex C provides simpler methods for the estimation of the heat capacities in some limited cases. These methods are suitable for the determination of dynamic thermal properties required for the estimation of energy consumption. These approximations are not appropriate, however, for product characterization.
NOTE Table 1 in the Introduction shows the relative position of ISO 13786:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.
Wärmetechnisches Verhalten von Bauteilen - Dynamisch-thermische Kenngrößen - Berechnungsverfahren (ISO 13786:2017)
Dieses Dokument legt die Kenngrößen fest, die mit dem dynamisch-thermischen Verhalten von kompletten Bauteilen in Beziehung stehen und gibt Verfahren für ihre Berechnung an. Sie legt weiterhin fest, welche Informationen über die Baustoffe für die Anwendung des Bauteils erforderlich sind. Da die Kenngrößen von der Art abhängen, wie Baustoffe kombiniert werden, um Bauteile zu bilden, gilt dieses Dokument nicht für Baustoffe oder unfertige Bauteile.
Die in diesem Dokument angegebenen Festlegungen gelten für jedes Bauteil. Ein vereinfachtes Berechnungsverfahren wird für ebene Bauteile, die aus ebenen Schichten weitgehend homogener Baustoffe zusammengesetzt sind, angegeben.
Anhang C enthält vereinfachte Verfahren zur Abschätzung der Wärmekapazitäten für einige Sonderfälle. Diese Verfahren eignen sich zur Bestimmung der dynamisch-thermischen Kenngrößen, die für die Abschätzung des Energiebedarfs benötigt werden. Diese Näherungswerte genügen jedoch nicht für eine Produktcharakterisierung.
Performance thermique des composants de bâtiment - Caractéristiques thermiques dynamiques - Méthodes de calcul (ISO 13786:2017)
L'ISO 13786:2017 spécifie les caractéristiques relatives au comportement thermique dynamique d'un composant de bâtiment à l'état fini et fournit des méthodes pour le calcul de ces caractéristiques. Il spécifie également l'information requise sur les matériaux de construction, pour l'utilisation du composant de bâtiment. Les caractéristiques étant dépendantes de la façon dont les matériaux sont combinés pour constituer des composants de bâtiment, l'ISO 13786:2017 ne s'applique pas à des matériaux de bâtiment ou à des composants de bâtiment inachevés.
Les définitions données dans l'ISO 13786:2017 sont applicables à tout composant de bâtiment. Une méthode de calcul simplifiée est donnée pour des composants plans constitués de couches planes homogènes ou quasi homogènes de matériaux de construction.
L'Annexe C spécifie des méthodes simplifiées pour l'estimation de la capacité thermique dans certains cas limités. En particulier, ces méthodes conviennent pour calculer les propriétés thermiques dynamiques nécessaires à l'estimation de la consommation d'énergie. Cependant, ces approximations ne conviennent pas pour caractériser des produits.
NOTE Le Tableau 1 de l'Introduction indique la position relative de l'ISO 13786:2017 dans la série de normes PEB dans le contexte de la structure modulaire définie dans l'ISO 52000‑1.
Toplotne značilnosti delov stavb - Dinamične toplotne značilnosti - Računske metode (ISO 13786:2017, popravljena različica 2018-03)
Ta dokument določa značilnosti v povezavi z dinamičnim toplotnim obnašanjem zaključenega dela stavbe in podaja metode za njihov izračun. Podaja tudi informacije o gradbenih materialih, potrebnih za uporabo dela stavbe. Ker so značilnosti odvisne od načina kombinirane uporabe materialov za dele stavb, se ta dokument ne uporablja za gradbene materiale ali nedokončane dele stavb.
Določbe, podane v tem dokumentu, se uporabljajo za kateri koli del stavbe. Za ravninske dele z ravninskimi plastmi iz precej homogenih gradbenih materialov je podana poenostavljena računska metoda.
Dodatek C vključuje preprostejše metode za oceno toplotnih značilnosti v nekaterih omejenih primerih. Te metode so ustrezne za ugotavljanje dinamičnih toplotnih značilnosti, ki je potrebno za oceno porabe energije. Vendar ti približki niso primerni za določanje lastnosti proizvodov.
OPOMBA: Preglednica 1 v uvodu prikazuje relativno mesto tega dokumenta znotraj skupine standardov EPB v kontekstu modularne strukture, kot je opredeljeno v standardu ISO 52000-1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 13786:2017
01-september-2017
Nadomešča:
SIST EN ISO 13786:2008
Toplotne značilnosti delov stavb - Dinamične toplotne značilnosti - Računske
metode (ISO 13786:2017, popravljena različica 2018-03)
Thermal performance of building components - Dynamic thermal characteristics -
Calculation methods (ISO 13786:2017, Corrected version 2018-03)
Wärmetechnisches Verhalten von Bauteilen - Dynamisch-thermische Kenngrößen -
Berechnungsverfahren (ISO 13786:2017)
Performance thermique des composants de bâtiment - Caractéristiques thermiques
dynamiques - Méthodes de calcul (ISO 13786:2017)
Ta slovenski standard je istoveten z: EN ISO 13786:2017
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN ISO 13786:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13786:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 13786:2017
EN ISO 13786
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2017
EUROPÄISCHE NORM
ICS 91.060.01; 91.120.10 Supersedes EN ISO 13786:2007
English Version
Thermal performance of building components - Dynamic
thermal characteristics - Calculation methods (ISO
13786:2017, Corrected version 2018-03)
Performance thermique des composants de bâtiment - Wärmetechnisches Verhalten von Bauteilen -
Caractéristiques thermiques dynamiques - Méthodes Dynamisch-thermische Kenngrößen -
de calcul (ISO 13786:2017) Berechnungsverfahren (ISO 13786:2017)
This European Standard was approved by CEN on 27 February 2017.
This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 21 November 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13786:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13786:2017
EN ISO 13786:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13786:2017
EN ISO 13786:2017 (E)
European foreword
This document (EN ISO 13786:2017) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is
held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2018 and conflicting national standards shall
be withdrawn at the latest by January 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is part of the set of standards and accompanying technical reports on the energy
performance of buildings and has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association (Mandate M/480, see reference [EF3] below).
Directive 2010/31/EU recasting the Directive 2002/91/EC on energy performance of buildings (EPBD,
[EF4]) promotes the improvement of the energy performance of buildings within the European Un
...
SLOVENSKI STANDARD
SIST EN ISO 13786:2017
01-september-2017
1DGRPHãþD
SIST EN ISO 13786:2008
7RSORWQH]QDþLOQRVWLGHORYVWDYE'LQDPLþQHWRSORWQH]QDþLOQRVWL5DþXQVNH
PHWRGH ,62
Thermal performance of building components - Dynamic thermal characteristics -
Calculation methods (ISO 13786:2017)
Wärmetechnisches Verhalten von Bauteilen - Dynamisch-thermische Kenngrößen -
Berechnungsverfahren (ISO 13786:2017)
Performance thermique des composants de bâtiment - Caractéristiques thermiques
dynamiques - Méthodes de calcul (ISO 13786:2017)
Ta slovenski standard je istoveten z: EN ISO 13786:2017
ICS:
91.120.10 Toplotna izolacija stavb Thermal insulation of
buildings
SIST EN ISO 13786:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 13786:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 13786:2017
EN ISO 13786
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2017
EUROPÄISCHE NORM
ICS 91.060.01; 91.120.10 Supersedes EN ISO 13786:2007
English Version
Thermal performance of building components - Dynamic
thermal characteristics - Calculation methods (ISO
13786:2017)
Performance thermique des composants de bâtiment - Wärmetechnisches Verhalten von Bauteilen -
Caractéristiques thermiques dynamiques - Méthodes Dynamisch-thermische Kenngrößen -
de calcul (ISO 13786:2017) Berechnungsverfahren (ISO 13786:2017)
This European Standard was approved by CEN on 27 February 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13786:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 13786:2017
EN ISO 13786:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 13786:2017
EN ISO 13786:2017 (E)
European foreword
This document (EN ISO 13786:2017) has been prepared by Technical Committee ISO/TC 163 "Thermal
performance and energy use in the built environment" in collaboration with Technical Committee
CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is
held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2018 and conflicting national standards shall
be withdrawn at the latest by January 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document is part of the set of standards and accompanying technical reports on the energy
performance of buildings and has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association (Mandate M/480, see reference [EF3] below).
Directive 2010/31/EU recasting the Directive 2002/91/EC on energy performance of buildings (EPBD,
[EF4]) promotes the improvement of the energy performance of buildings within the European Union,
taking into account all types of energy uses (heating, lighting, cooling, air conditioning, ventilation) and
outdoor climatic and local conditions, as well as indoor climate requirements and cost effect
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.