EN ISO 384:2015
(Main)Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)
Laboratory glass and plastics ware - Principles of design and construction of volumetric instruments (ISO 384:2015)
ISO 384:2015 sets out principles for the design of volumetric instruments manufactured from glass or from plastics in order to facilitate the most reliable and convenient use to the intended degree of accuracy.
Laborgeräte aus Glas oder Kunststoff - Grundlagen für Gestaltung und Bau von Volumenmessgeräten (ISO 384:2015)
Diese Internationale Norm beschreibt Grundlagen für die Gestaltung von Volumenmessgeräten, die aus Glas oder Kunststoff gefertigt sind; die Volumenmessgeräte sollten bei der vorgesehenen Genauigkeit möglichst zuverlässig und einfach zu handhaben sein.
Matériel de laboratoire en verre ou en plastique - Principes de conception et de construction d'instruments volumétriques (ISO 384:2015)
ISO 384:2015 établit les principes pour la conception des instruments volumétriques fabriqués en verre ou en plastique afin de faciliter l'utilisation la plus sûre et la plus commode avec le degré de précision souhaité.
Laboratorijska steklena in plastična posoda - Načela za oblikovanje in konstruiranje volumetrijske steklovine (ISO 384:2015)
Ta evropski standard določa načela za oblikovanje volumetrijskih instrumentov iz stekla ali plastike, da bi tako zagotovili najzanesljivejšo in najpriročnejšo uporabo v okviru predvidene stopnje natančnosti.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2016
1DGRPHãþD
SIST ISO 384:1995
/DERUDWRULMVNDVWHNOHQDLQSODVWLþQDSRVRGD1DþHOD]DREOLNRYDQMHLQ
NRQVWUXLUDQMHYROXPHWULMVNHVWHNORYLQH ,62
Laboratory glass and plastics ware - Principles of design and construction of volumetric
instruments (ISO 384:2015)
Laborgeräte aus Glas oder Kunststoff - Grundlagen für Gestaltung und Bau von
Volumenmessgeräten (ISO 384:2015)
Matériel de laboratoire en verre ou en plastique - Principes de conception et de
construction d'instruments volumétriques (ISO 384:2015)
Ta slovenski standard je istoveten z: EN ISO 384:2015
ICS:
17.060 Merjenje prostornine, mase, Measurement of volume,
gostote, viskoznosti mass, density, viscosity
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 384
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2015
EUROPÄISCHE NORM
ICS 17.060
English Version
Laboratory glass and plastics ware - Principles of design
and construction of volumetric instruments (ISO
384:2015)
Matériel de laboratoire en verre ou en plastique - Laborgeräte aus Glas oder Kunststoff - Grundlagen für
Principes de conception et de construction Gestaltung und Bau von Volumenmessgeräten (ISO
d'instruments volumétriques (ISO 384:2015) 384:2015)
This European Standard was approved by CEN on 16 November 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 384:2015 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 384:2015) has been prepared by Technical Committee ISO/TC 48 "Laboratory
equipment" in collaboration with Technical Committee CEN/TC 332 “Laboratory equipment” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 384:2015 has been approved by CEN as EN ISO 384:2015 without any modification.
INTERNATIONAL ISO
STANDARD 384
Second edition
2015-12-15
Laboratory glass and plastics ware —
Principles of design and construction
of volumetric instruments
Matériel de laboratoire en verre ou en plastique — Principes de
conception et de construction d’instruments volumétriques
Reference number
ISO 384:2015(E)
©
ISO 2015
ISO 384:2015(E)
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved
ISO 384:2015(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Unit of volume and reference temperature . 1
4.1 Unit of volume . 1
4.2 Reference temperature . 1
5 Volumetric accuracy. 1
6 Methods of calibration and use . 2
7 Construction . 3
7.1 Material . 3
7.2 Wall thickness . 3
7.3 Shape . 3
7.4 Capacity . 3
7.5 Stability . 3
7.6 Delivery jets . 3
7.7 Stoppers . 4
7.8 Stopcocks or similar devices . 4
8 Linear dimensions . 4
9 Graduation lines . 5
10 Scales . 6
10.1 Spacing of graduation lines . 6
10.2 Length of graduation lines (see Figure 2) . 6
10.2.1 General. 6
10.2.2 Graduation pattern l . 6
10.2.3 Graduation pattern II . 6
10.2.4 Graduation pattern IIl . . 6
10.2.5 Special cases . 7
10.3 Sequence of graduation lines (see Figure 1) . 7
10.4 Position of graduation lines (see Figure 2) . 8
11 Figuring of graduation lines . 9
12 Marking .10
13 Visibility of graduation lines, figures and inscriptions .11
Annex A (normative) Maximum permissible error in relation to the inner diameter at
the meniscus .12
Bibliography .15
ISO 384:2015(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.