CEN ISO/TR 20172:2009

Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)

ISO/TR 20172:2009 establishes a European grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608. It is also applicable for other purposes such as heat treatment, forming and non-destructive testing.
ISO/TR 20172:2009 covers grouping systems for the following standardized materials:
– steel;
– aluminium and its alloys;
– copper and its alloys;
– cast irons.

Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/TR 20172:2009)

Dieser Technische Bericht enthält eine europäische Gruppeneinteilung von Werkstoffen zum Schweißen,
gegliedert nach der Gruppeneinteilung von ISO/TR 15608.
Er kann auch für andere Zwecke wie Wärmebehandlung, Umformen, zerstörungsfreie Prüfung angewendet
werden.
Dieser Technische Bericht enthält eine Gruppeneinteilung für die nachstehend genannten genormten
Werkstoffe:
a) Stahl;
b) Aluminium und seine Legierungen;
c) Kupfer und seine Legierungen;
d) Gusseisen.
In strittigen Fällen, wie zum Beispiel bei Schwankungen in der Dicke und Streckgrenze, gilt ISO/TR 15608.

Soudage - Systèmes de groupement des matériaux - Matériaux européens (ISO/TR 20172:2009)

L'ISO/TR 20172:2009 fournit un système de groupement européen des matériaux destinés au soudage, classé conformément au système de groupement de l'ISO/TR 15608. Il est également applicable pour d'autres fins telles que le traitement thermique, le formage et les contrôles non destructifs.
L'ISO/TR 20172:2009 couvre les systèmes de groupement des matériaux normalisés suivants:
aciers;
aluminium et alliages d'aluminium;
cuivre et alliages de cuivre;
fontes.

Varjenje - Razvrščanje materialov v skupine - Evropski materiali (ISO/TR 20172:2009)

To tehnično poročilo vzpostavlja evropski sistem za razvrščanje materialov v skupine za namene varjenja, ki so razvrščeni v skladu s sistemom za razvrščanje v skupine iz standarda ISO/TR 15608. Uporablja se lahko tudi za druge namene, kot so toplotna obdelava, oblikovanje in neporušitveno preskušanje. To tehnično poročilo zajema sisteme za razvrščanje naslednjih standardiziranih materialov v skupine: a) jeklo; b) aluminij in njegove zlitine; c) baker in njegove zlitine; d) litine. V primeru spora, če na primer pride do odstopanj v lastnostih, kot sta debelina in meja tečenja, se uporablja standard ISO/TR 15608.

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-2009
• Withdrawal Date: 04-May-2021
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121 - Welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 05-May-2021
• Ref Project: SIST-TP CEN ISO/TR 20172:2013 - Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)

Relations

• Replaces: CEN ISO/TR 20172:2006 - Welding - Grouping systems for materials - European materials (ISO/TR 20172:2006)
• Effective Date: 08-Jun-2022
• Replaced By: CEN ISO/TR 20172:2021 - Welding - Grouping systems for materials - European materials (ISO/TR 20172:2021)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 20172:2013
01-december-2013
1DGRPHãþD
SIST-TP CEN ISO/TR 20172:2006
9DUMHQMH5D]YUãþDQMHPDWHULDORYYVNXSLQH(YURSVNLPDWHULDOL,6275

Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/TR 20172:2009)
Soudage - Systèmes de groupement des matériaux - Matériaux européens (ISO/TR
20172:2009)
Ta slovenski standard je istoveten z: CEN ISO/TR 20172:2009
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST-TP CEN ISO/TR 20172:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TP CEN ISO/TR 20172:2013

---------------------- Page: 2 ----------------------

SIST-TP CEN ISO/TR 20172:2013
TECHNICAL REPORT
CEN ISO/TR 20172
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
June 2009
ICS 25.160.20 Supersedes CEN ISO/TR 20172:2006
English Version
Welding - Grouping systems for materials - European materials
(ISO 20172:2009)
Soudage - Systèmes de groupement des matériaux - Schweißen - Werkstoffgruppeneinteilung - Europäische
Matériaux européens (ISO 20172:2009) Werkstoffe (ISO 20172:2009)
This Technical Report was approved by CEN on 30 May 2009. It has been drawn up by the Technical Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 20172:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TP CEN ISO/TR 20172:2013
CEN ISO/TR 20172:2009 (E)
Contents Page
Foreword .3
2

---------------------- Page: 4 ----------------------

SIST-TP CEN ISO/TR 20172:2013
CEN ISO/TR 20172:2009 (E)
Foreword
This document (CEN ISO/TR 20172:2009) has been prepared by Technical Committee CEN/TC 121
“Welding", the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 44
"Welding and allied processes".
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TR 20172:2006.
3

---------------------- Page: 5 ----------------------

SIST-TP CEN ISO/TR 20172:2013

---------------------- Page: 6 ----------------------

SIST-TP CEN ISO/TR 20172:2013

TECHNICAL ISO/TR
REPORT 20172
Second edition
2009-06-15

Welding — Grouping systems for
materials — European materials
Soudage — Systèmes de groupement des matériaux — Matériaux
européens



Reference number
ISO/TR 20172:2009(E)
©
ISO 2009

---------------------- Page: 7 ----------------------

SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland

ii
...