SIST-TP CEN ISO/TR 20172:2013
(Main)Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
This Technical Report establishes a European grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR 15608. It is also applicable for other purposes such as heat treatment, forming and non-destructive testing. This Technical Report covers grouping systems for the following standardized materials: a) steel; b) aluminium and its alloys; c) copper and its alloys; d) cast irons. In case of dispute, for example where variations in properties such as thickness and yield strength occur, ISO/TR 15608 applies.
Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/TR 20172:2009)
Dieser Technische Bericht enthält eine europäische Gruppeneinteilung von Werkstoffen zum Schweißen,
gegliedert nach der Gruppeneinteilung von ISO/TR 15608.
Er kann auch für andere Zwecke wie Wärmebehandlung, Umformen, zerstörungsfreie Prüfung angewendet
werden.
Dieser Technische Bericht enthält eine Gruppeneinteilung für die nachstehend genannten genormten
Werkstoffe:
a) Stahl;
b) Aluminium und seine Legierungen;
c) Kupfer und seine Legierungen;
d) Gusseisen.
In strittigen Fällen, wie zum Beispiel bei Schwankungen in der Dicke und Streckgrenze, gilt ISO/TR 15608.
Soudage - Systèmes de groupement des matériaux - Matériaux européens (ISO/TR 20172:2009)
L'ISO/TR 20172:2009 fournit un système de groupement européen des matériaux destinés au soudage, classé conformément au système de groupement de l'ISO/TR 15608. Il est également applicable pour d'autres fins telles que le traitement thermique, le formage et les contrôles non destructifs.
L'ISO/TR 20172:2009 couvre les systèmes de groupement des matériaux normalisés suivants:
aciers;
aluminium et alliages d'aluminium;
cuivre et alliages de cuivre;
fontes.
Varjenje - Razvrščanje materialov v skupine - Evropski materiali (ISO/TR 20172:2009)
To tehnično poročilo vzpostavlja evropski sistem za razvrščanje materialov v skupine za namene varjenja, ki so razvrščeni v skladu s sistemom za razvrščanje v skupine iz standarda ISO/TR 15608. Uporablja se lahko tudi za druge namene, kot so toplotna obdelava, oblikovanje in neporušitveno preskušanje. To tehnično poročilo zajema sisteme za razvrščanje naslednjih standardiziranih materialov v skupine: a) jeklo; b) aluminij in njegove zlitine; c) baker in njegove zlitine; d) litine. V primeru spora, če na primer pride do odstopanj v lastnostih, kot sta debelina in meja tečenja, se uporablja standard ISO/TR 15608.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN ISO/TR 20172:2013
01-december-2013
1DGRPHãþD
SIST-TP CEN ISO/TR 20172:2006
9DUMHQMH5D]YUãþDQMHPDWHULDORYYVNXSLQH(YURSVNLPDWHULDOL ,6275
Welding - Grouping systems for materials - European materials (ISO/TR 20172:2009)
Schweißen - Werkstoffgruppeneinteilung - Europäische Werkstoffe (ISO/TR 20172:2009)
Soudage - Systèmes de groupement des matériaux - Matériaux européens (ISO/TR
20172:2009)
Ta slovenski standard je istoveten z: CEN ISO/TR 20172:2009
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST-TP CEN ISO/TR 20172:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN ISO/TR 20172:2013
---------------------- Page: 2 ----------------------
SIST-TP CEN ISO/TR 20172:2013
TECHNICAL REPORT
CEN ISO/TR 20172
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
June 2009
ICS 25.160.20 Supersedes CEN ISO/TR 20172:2006
English Version
Welding - Grouping systems for materials - European materials
(ISO 20172:2009)
Soudage - Systèmes de groupement des matériaux - Schweißen - Werkstoffgruppeneinteilung - Europäische
Matériaux européens (ISO 20172:2009) Werkstoffe (ISO 20172:2009)
This Technical Report was approved by CEN on 30 May 2009. It has been drawn up by the Technical Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 20172:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN ISO/TR 20172:2013
CEN ISO/TR 20172:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST-TP CEN ISO/TR 20172:2013
CEN ISO/TR 20172:2009 (E)
Foreword
This document (CEN ISO/TR 20172:2009) has been prepared by Technical Committee CEN/TC 121
“Welding", the secretariat of which is held by DIN, in collaboration with Technical Committee ISO/TC 44
"Welding and allied processes".
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN ISO/TR 20172:2006.
3
---------------------- Page: 5 ----------------------
SIST-TP CEN ISO/TR 20172:2013
---------------------- Page: 6 ----------------------
SIST-TP CEN ISO/TR 20172:2013
TECHNICAL ISO/TR
REPORT 20172
Second edition
2009-06-15
Welding — Grouping systems for
materials — European materials
Soudage — Systèmes de groupement des matériaux — Matériaux
européens
Reference number
ISO/TR 20172:2009(E)
©
ISO 2009
---------------------- Page: 7 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2009
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2009 – All rights reserved
---------------------- Page: 8 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 International grouping system for European materials. 2
2.1 Types of steel in accordance with the grouping system of ISO/TR 15608:2005, Table 1 . 2
2.2 Types of aluminium and aluminium alloy in accordance with the grouping system of
ISO/TR 15608:2005, Table 2 . 21
2.3 Types of copper and copper alloy in accordance with the grouping system of
ISO/TR 15608:2005, Table 3 . 23
2.4 Types of cast iron in accordance with the grouping system of ISO/TR 15608:2005, Table 7 . 25
2.5 Types of cast iron in accordance with the grouping system of ISO/TR 15608:2005, Table 7,
additional . 27
Bibliography . 29
© ISO 2009 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from that
which is normally published as an International Standard ("state of the art", for example), it may decide by a
simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely
informative in nature and does not have to be reviewed until the data it provides are considered to be no
longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 20172 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 121, Welding, in collaboration with Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Unification of requirements in the field of metal welding, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).
This second edition cancels and replaces the first edition (ISO/TR 20172:2006), which has been technically
revised.
iv © ISO 2009 – All rights reserved
---------------------- Page: 10 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Introduction
This Technical Report reflects the situation in November 2007. Changes in European material standards will
be taken into account in the next revision of this Technical Report.
Lists of former designations can be found in the relevant European materials standards.
For the materials not listed in this Technical Report, ISO/TR 20173:2005 and ISO/TR 20174:2005 are
applicable.
© ISO 2009 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST-TP CEN ISO/TR 20172:2013
---------------------- Page: 12 ----------------------
SIST-TP CEN ISO/TR 20172:2013
TECHNICAL REPORT ISO/TR 20172:2009(E)
Welding — Grouping systems for materials — European
materials
1 Scope
This Technical Report establishes a European grouping system for materials for welding purposes, classified
in accordance with the grouping system of ISO/TR 15608.
It is also applicable for other purposes such as heat treatment, forming and non-destructive testing.
This Technical Report covers grouping systems for the following standardized materials:
a) steel;
b) aluminium and its alloys;
c) copper and its alloys;
d) cast irons.
In case of dispute, for example where variations in properties such as thickness and yield strength occur,
ISO/TR 15608 applies.
© ISO 2009 – All rights reserved 1
---------------------- Page: 13 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
2 International grouping system for European materials
2.1 Types of steel in accordance with the grouping system of ISO/TR 15608:2005, Table 1
See Table 1.
Table 1 — Steel materials, classification according to the grouping of material
Designation
Group Standard(s)
Name Number
10CrMo5-5 1.7338 5.1 EN 10216-2
10CrMo9-10 1.7380 5.2 EN 10028-2, EN 10216-2, EN 10273
EN 10028-2, EN 10216-2,
11CrMo9-10 1.7383 5.2
EN 10222-2, EN 10273
11MnNi5-3 1.6212 9.1 EN 10028-4, EN 10216-4
EN 10028-4, EN 10216-4,
12Ni14 1.5637 9.2
EN 10222-3
12Ni19 1.5680 9.2 EN 10028-4
EN 10028-2, EN 10216-2,
13CrMo4-5 1.7335 5.1
EN 10222-2, EN 10273
EN 10028-4, EN 10216-4,
13MnNi6-3 1.6217 9.1
EN 10222-3
14MoV6-3 1.7715 6.1 EN 10216-2, EN 10222-2
15MnCrMoNiV5-3 1.6920 4.1 EN 10222-2
15MnMoV4-5 1.5402 1.2 EN 10222-2
15NiCuMoNb5-64 1.6368 4.2 EN 10216-2
15NiMn6 1.6228 9.1 EN 10028-4, EN 10222-3
16MnCr5 1.7131 1.4 EN 10132-2
EN 10222-2, EN 10216-2,
16Mo3 1.5415 1.1 EN 10217-2, EN 10217-5, EN 10273,
EN 10028-2
17Cr3 1.7016 1.4 EN 10132-2
18MnMoNi5-5 1.6308 4.1 EN 10222-2
20CrMoV13-5-5 1.7779 6.3 EN 10216-2
20Mn5 1.1133 1.4 EN 10250-2
20MnB5 1.5353 3.2 EN 10083-3
20MnNb6 1.0471 1.2 EN 10216-2
20NiCrMo2-2 1.6523 4.1 EN 10297-1
20NiCrMoS2-2 1.6526 4.1 EN 10297-1
24CrMo13-6 1.8516 5.2 EN 10085
EN 10083-3, EN 10132-2,
25CrMo4 1.7218 5.1
EN 10216-2, EN 10297-1
25CrMoS4 1.7213 5.1 EN 10083-3, EN 10277-5
25Mn4 1.1177 1.3 EN 10132-2
2 © ISO 2009 – All rights reserved
---------------------- Page: 14 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
26CrMo4-2 1.7219 5.1 EN 10216-4
27MnCrB5-2 1.7182 11.1 EN 10083-3
28Mn6 1.1170 1.4 EN 10083-2, EN 10250-2
30CrMo4 1.7216 5.1 EN 10297-1
30MnB5 1.5531 11.1 EN 10083-3
30NiCrMo16-6 1.6747 9.2 EN 10083-3
31CrMo12 1.8515 5.2 EN 10085
31CrMoV9 1.8519 6.2 EN 10085
32CrAlMo7-10 1.8505 5.1 EN 10085
33CrMoV12-9 1.8522 6.2 EN 10085
34Cr4 1.7033 5.2 EN 10083-3
34CrAlMo5-10 1.8507 5.1 EN 10085
34CrAlNi7-10 1.8550 5.1 EN 10085
EN 10083-3, EN 10132-2,
34CrMo4 1.7220 5.1
EN 10297-1
34CrMoS4 1.7226 11.2 EN 10083-3
34CrNiMo6 1.6582 4.2 EN 10277-5
34CrS4 1.7037 5.1 EN 10083-3
35NiCr6 1.5815 9.1 EN 10083-3
36NiCrMo16 1.6773 9.2 EN 10083-3
37Cr4 1.7034 5.1 EN 10083-3
37CrS4 1.7038 5.1 EN 10083-3
38Cr2 1.7003 5.1 EN 10083-3
38Mn6 1.1127 11.2 EN 10297-1
39MnCrB6-2 1.7189 5.1 EN 10083-3
39NiCrMo3 1.6510 9.2 EN 10083-3
40CrMoV13-9 1.8523 6.2 EN 10085
41Cr4 1.7035 11.2 EN 10083-3
41CrAlMo7-10 1.8509 5.1 EN 10085
41CrS4 1.7039 11.2 EN 10083-3
EN 10083-3, EN 10132-2,
42CrMo4 1.7225 5.1
EN 10297-1
42CrMoS4 1.7227 5.1 EN 10083-3, EN 10277-5
46Cr2 1.7006 5.1 EN 10083-3
50CrMo4 1.7228 5.1 EN 10083-3
51CrV4 1.8159 6.1 EN 10083-3
8MoB5-4 1.5450 1.3 EN 10216-2
© ISO 2009 – All rights reserved 3
---------------------- Page: 15 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
C10 1.0301 1.1 EN 10277-2
C10E 1.1121 1.1 EN 10132-2, EN 10297-1
C15 1.0401 1.1 EN 10277-2
C15E 1.1141 1.1 EN 10132-2, EN 10297-1
C15R 1.1114 1.1 EN 10297-1
C16 1.0407 1.1 EN 10277-2
C22 1.0402 1.2 EN 10250-2
EN 10132-2, EN 10083-2,
C22E 1.1151 1.1
EN 10297-1
C22R 1.1149 1.1 EN 10083-2
C25 1.0406 1.2 EN 10250-2
C25E 1.1158 1.2 EN 10250-2
C30 1.0528 11.1 EN 10250-2
C30E 1.1178 11.1 EN 10132-2
EN 10083-2, EN 10250-2,
C35 1.0501 11.1
EN 10277-2
EN 10083-2, EN 10250-2,
C35E 1.1181 11.1 EN 10297-1, EN 10132-2,
EN 10277-5
C35R 1.1180 11.1 EN 10277-5
C35R 1.1180 11.2 EN 10083-2
EN 10083-2, EN 10250-2,
C40 1.0511 11.2
EN 10277-2
EN 10083-2, EN 10132-2,
C40E 1.1186 11.2
EN 10277-5
C40R 1.1189 11.2 EN 10083-2, EN 10277-5
EN 10083-2, EN 10250-2,
C45 1.0503 11.2
EN 10277-2
EN 10083-2, EN 10250-2,
C45E 1.1191 11.2
EN 10297-1, EN 10132-2
C45R 1.1201 11.2 EN 10083-2, EN 10277-5
C50 1.0540 11.2 EN 10250-2, EN 10277-2
C50E 1.1206 11.2 EN 10132-2, EN 10277-5
C50E 1.1206 11.3 EN 10083-2
C50R 1.1241 11.2 EN 10083-2, EN 10277-5
C55 1.0535 11.3 EN 10250-2, EN 10083-2
EN 10083-2, EN 10250-2,
C55E 1.1203 11.3
EN 10132-2
C55R 1.1209 11.3 EN 10083-2
4 © ISO 2009 – All rights reserved
---------------------- Page: 16 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
EN 10083-2, EN 10277-2,
C60 1.0601 11.3
EN 10250-2
EN 10083-2, EN 10132-2,
C60E 1.1221 11.3 EN 10250-2, EN 10297-1,
EN 10277-5
C60R 1.1223 11.3 EN 10083-2, EN 10277-5
EN 10296-1, EN 10305-2,
E155 1.0033 1.1
EN 10305-3, EN 10305-6
E190 1.0031 1.1 EN 10296-1, EN 10305-3
EN 10296-1, EN 10305-3,
E195 1.0034 1.1
EN 10305-6, EN 10305-2
E215 1.0212 1.1 EN 10305-1, EN 10305-4
EN 10296-1, EN 10305-3,
E220 1.0215 1.1
EN 10305-5
EN 10296-1, EN 10297-1,
EN 10305-1, EN 10305-2,
E235 1.0308 1.1
EN 10305-3, EN 10305-4,
EN 10305-6
E260 1.0220 1.1 EN 10296-1, EN 10305-3
E260 1.0221 1.1 EN 10305-3
EN 10296-1, EN 10297-1,
E275 1.0225 1.1 EN 10305-2, EN 10305-3,
EN 10305-5, EN 10305-6
E275K2 1.0456 1.1 EN 10296-1, EN 10297-1
E275M 1.8895 1.1 EN 10296-1
E295GC 1.0533 1.2 EN 10277-2
E315 1.0236 1.2 EN 10297-1
EN 10296-1, EN 10305-3,
E320 1.0237 1.2
EN 10305-5
E335GC 1.0543 1.2 EN 10277-2
EN 10296-1, EN 10305-2,
EN 10305-3, EN 10305-4,
E355 1.0580 1.2
EN 10305-6, EN 10305-1,
EN 10297-1
E355K2 1.0599 1.2 EN 10297-1
E355K2 1.0920 1.2 EN 10296-1
E355M 1.8896 1.2 EN 10296-1
EN 10296-1, EN 10305-3,
E370 1.0261 1.3
EN 10305-5
E420 1.0575 1.3 EN 10305-3, EN 10305-5
E420J2 1.0920 1.3 EN 10297-1
E420M 1.8897 1.3 EN 10296-1
© ISO 2009 – All rights reserved 5
---------------------- Page: 17 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
E460K2 1.8891 1.3 EN 10296-1, EN 10297-1
E460M 1.8898 1.3 EN 10296-1
E470 1.0536 1.3 EN 10297-1
E590K2 1.0644 1.3 EN 10297-1
E730K2 1.8893 1.3 EN 10297-1
G12MoCrV5-2 1.7720 6.1 EN 10213
G17CrMo5-5 1.7357 5.1 EN 10213
G17CrMo9-10 1.7379 5.2 EN 10213
G17CrMoV5-10 1.7706 6.2 EN 10213
G17Mn5 1.1131 1.1 EN 10213
G17NiCrMo13-6 1.6781 9.2 EN 10213
G18Mo5 1.5422 1.2 EN 10213
G20Mn5 1.6220 1.2 EN 10213
G20Mo5 1.5419 3.1 EN 10213-2
G9Ni10 1.5636 9.1 EN 10213
G9Ni14 1.5638 9.2 EN 10213
GP240GH 1.0619 1.1 EN 10213
GP240GR 1.0621 1.1 EN 10213
GP280GH 1.0625 1.2 EN 10213
GX15CrMo5 1.7365 5.3 EN 10213
GX23CrMoV12-1 1.4931 6.4 EN 10213
GX2CrNi19-11 1.4309 8.1 EN 10213
GX2CrNiMo19-11-2 1.4409 8.1 EN 10213
GX2CrNiMoCuN25-6-3-3 1.4517 10.2 EN 10213
GX2CrNiMoN22-5-3 1.4470 10.1 EN 10213
GX2CrNiMoN26-7-4 1.4469 10.2 EN 10213
GX2NiCrMo28-20-2 1.4458 8.1 EN 10213
GX3CrNi13-4 1.6982 7.2 EN 10213
GX4CrNi13-4 1.4317 7.2 EN 10213
GX4CrNiMo16-5-1 1.4405 8.1 EN 10132-2
GX5CrNi19-10 1.4308 8.1 EN 10213
GX5CrNiMo19-11-2 1.4408 8.1 EN 10213
GX5CrNiMoNb19-11-2 1.4581 8.1 EN 10213
GX5CrNiNb19-11 1.4552 8.1 EN 10213
GX8CrNi12 1.4107 7.2 EN 10213
HC180B 1.0395 1.1 EN 10268
6 © ISO 2009 – All rights reserved
---------------------- Page: 18 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
HC180P 1.0342 1.1 EN 10268
HC180Y 1.0922 1.1 EN 10268
HC220B 1.0396 1.1 EN 10268
HC220I 1.0346 1.1 EN 10268
HC220P 1.0397 1.1 EN 10268
HC220Y 1.0925 1.1 EN 10268
HC260B 1.0400 1.1 EN 10268
HC260I 1.0349 1.1 EN 10268
HC260LA 1.0480 1.1 EN 10268
HC260P 1.0417 1.1 EN 10268
HC260Y 1.0928 1.1 EN 10268
HC300B 1.0444 1.2 EN 10268
HC300I 1.0447 1.2 EN 10268
HC300LA 1.0489 1.2 EN 10268
HC300P 1.0448 1.2 EN 10268
HC340LA 1.0548 1.2 EN 10268
HC380LA 1.0550 1.3 EN 10268
HC420LA 1.0556 1.3 EN 10268
L210GA 1.0319 1.1 EN 10208-1
L235 1.0252 1.1 EN 10224
L235GA 1.0458 1.1 EN 10208-1
L245GA 1.0459 1.1 EN 10208-1
L245MB 1.0418 1.1 EN 10208-2
L245NB 1.0457 1.1 EN 10208-2
L275 1.0260 1.1 EN 10224
L290GA 1.0483 1.2 EN 10208-1
L290MB 1.0429 1.2 EN 10208-2
L290NB 1.0484 1.2 EN 10208-2
L355 1.0419 1.2 EN 10224
L360GA 1.0499 1.2 EN 10208-1
L360MB 1.0578 1.2 EN 10208-2
L360NB 1.0582 1.2 EN 10208-2
L360QB 1.8948 1.2 EN 10208-2
L415MB 1.8973 2.1 EN 10208-2
L415NB 1.8972 1.3 EN 10208-2
L415QB 1.8947 3.1 EN 10208-2
© ISO 2009 – All rights reserved 7
---------------------- Page: 19 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
L450MB 1.8975 2.1 EN 10208-2
L450QB 1.8952 3.1 EN 10208-2
L485MB 1.8977 2.2 EN 10208-2
L485QB 1.8955 3.1 EN 10208-2
L550QB 1.8957 3.1 EN 10208-2
L555MB 1.8978 2.2 EN 10208-2
P195GH 1.0348 1.1 EN 10216-2, EN 10217-2
P195TR1 1.0107 1.1 EN 10216-1, EN 10217-1
P195TR2 1.0108 1.1 EN 10216-1, EN 10217-1
EN 10216-4, EN 10217-4,
P215NL 1.0451 1.1
EN 10217-6
EN 10216-2, EN 10217-2,
P235GH 1.0345 1.1
EN 10217-5, EN 10273, EN 10028-2
P235S 1.0112 1.1 EN 10207
P235TR1 1.0254 1.1 EN 10216-1, EN 10217-1
P235TR2 1.0255 1.1 EN 10216-1, EN 10217-1
P245GH 1.0352 1.1 EN 10222-2
P245NB 1.0111 1.1 EN 10120
P250GH 1.0460 1.1 EN 10273
P255QL 1.0452 1.1 EN 10216-4
EN 10216-2, EN 10217-2,
P265GH 1.0425 1.1
EN 10217-5, EN 10273, EN 10028-2
P265NB 1.0423 1.1 EN 10120, EN 10149-3
EN 10216-4, EN 10217-4,
P265NL 1.0453 1.1
EN 10217-6
P265S 1.0130 1.1 EN 10207
P265TR1 1.0258 1.1 EN 10216-1, EN 10217-1
P265TR2 1.0259 1.1 EN 10216-1, EN 10217-1
P275N 1.0486 1.1 EN 10028-3
P275NH 1.0487 1.1 EN 10273, EN 10028-3
EN 10216-3, EN 10217-3,
P275NL1 1.0488 1.1
EN 10028-3
EN 10216-3, EN 10217-3,
P275NL2 1.1104 1.1
EN 10028-3
P275S 1.1100 1.1 EN 10207
P280GH 1.0426 1.2 EN 10222-2
P285NH 1.0477 1.2 EN 10222-4
P285QH 1.0478 1.2 EN 10222-4
P295GH 1.0481 1.2 EN 10273, EN 10028-2
8 © ISO 2009 – All rights reserved
---------------------- Page: 20 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
P305GH 1.0436 1.2 EN 10222-2
P310NB 1.0437 1.2 EN 10120
P355GH 1.0473 1.2 EN 10273, EN 10028-2
P355M 1.8821 1.2 EN 10028-5
P355ML1 1.8832 1.2 EN 10028-5
P355ML2 1.8833 1.2 EN 10028-5
EN 10216-3, EN 10217-3,
P355N 1.0562 1.2
EN 10028-3
P355NB 1.0557 1.2 EN 10120
EN 10216-3, EN 10217-3, EN 10273,
P355NH 1.0565 1.2
EN 10028-3, EN 10222-4
EN 10216-3, EN 10217-3,
P355NL1 1.0566 1.2
EN 10028-3
EN 10216-3, EN 10217-3,
P355NL2 1.1106 1.2
EN 10028-3
P355Q 1.8866 1.2 EN 10028-6
P355QH 1.8867 1.2 EN 10273, EN 10028-6
P355QH1 1.0571 1.2 EN 10222-4
P355QL1 1.8868 1.2 EN 10028-6
P355QL2 1.8869 1.2 EN 10028-6
P420M 1.8824 2.1 EN 10028-5
P420ML1 1.8835 2.1 EN 10028-5
P420ML2 1.8828 2.1 EN 10028-5
P420NH 1.8932 1.3 EN 10222-4
P420QH 1.8936 3.1 EN 10222-4
P460M 1.8826 2.1 EN 10028-5
P460ML1 1.8837 2.1 EN 10028-5
P460ML2 1.8831 2.1 EN 10028-5
EN 10216-3, EN 10217-3,
P460N 1.8905 1.3
EN 10028-3
P460NH 1.8935 1.3 EN 10273, EN 10216-3, EN 10217-3
P460NH 1.8935 1.3 EN 10028-3
EN 10216-3, EN 10217-3,
P460NL1 1.8915 1.3
EN 10028-3
EN 10216-3, EN 10217-3,
P460NL2 1.8918 1.3
EN 10028-3
P460Q 1.8870 3.1 EN 10028-6
P460QH 1.8871 3.1 EN 10273, EN 10028-6
P460QL1 1.8872 3.1 EN 10028-6
© ISO 2009 – All rights reserved 9
---------------------- Page: 21 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
P460QL2 1.8864 3.1 EN 10028-6
P500Q 1.8873 3.1 EN 10028-6
P500QH 1.8874 3.1 EN 10028-6
P500QL1 1.8875 3.1 EN 10028-6
P500QL2 1.8865 3.1 EN 10028-6
P620Q 1.8876 3.1 EN 10216-3
P620QH 1.8877 3.1 EN 10216-2
P620QL 1.8890 3.1 EN 10216-2
P690Q 1.8879 3.1 EN 10216-2, EN 10028-6
P690QH 1.8880 3.1 EN 10216-2, EN 10028-6
P690QL1 1.8881 3.1 EN 10216-2, EN 10028-6
P690QL2 1.8888 3.1 EN 10216-2, EN 10028-6
R200 1.0521 11.3 EN 13674-1
R220 1.0524 11.3 EN 13674-1
R260 1.0623 11.3 EN 13674-1
R260Mn 1.0624 11.3 EN 13674-1
R320Cr 1.0915 11.3 EN 13674-1
R350LHT 1.0632 11.3 EN 13674-1
R50HT 1.0631 11.3 EN 13674-1
S195T 1.0026 1.1 EN 10255
S235J0 1.0114 1.1 EN 10025-2
S235J0W 1.8958 1.4 EN 10025-5
S235J2G3 1.0116 1.1 EN 10250-2, EN 10025-2
S235J2G3C 1.0118 1.1 EN 10025-2
S235J2G4 1.0117 1.1 EN 10025-2
S235J2G4C 1.0119 1.1 EN 10025-2
S235JR 1.0037 1.1 EN 10025-2
S235JRG1 1.0036 1.1 EN 10025-2
S235JRG2 1.0038 1.1 EN 10025-2, EN 10250-2
S235JRG2 1.0122 1.1 EN 10277-2
S235JRH 1.0039 1.1 EN 10210-1, EN 10219-1
S240GP 1.0021 1.1 EN 10248-1
S260NC 1.0971 1.1 EN 10149-3
S270GP 1.0023 1.1 EN 10248-1
S275J0 1.0143 1.1 EN 10025-2
S275J0H 1.0149 1.1 EN 10210-1, EN 10219-1
10 © ISO 2009 – All rights reserved
---------------------- Page: 22 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S275J2G3 1.0144 1.1 EN 10025-2
S275J2G3C 1.0141 1.1 EN 10025-2
S275J2G4 1.0145 1.1 EN 10025-2
S275J2G4C 1.0142 1.1 EN 10025-2
S275J2H 1.0138 1.1 EN 10210-1, EN 10219-1
S275J2W 1.8961 1.4 EN 10025-5
S275JR 1.0044 1.1 EN 10025-2
S275M 1.8818 1.1 EN 10025-4
S275MH 1.8843 1.1 EN 10219-1
S275ML 1.8819 1.1 EN 10025-4
S275MLH 1.8844 1.1 EN 10219-1
S275N 1.0490 1.1 EN 10025-3
S275NH 1.0493 1.1 EN 10210-1, EN 10219-1
S275NL 1.0491 1.1 EN 10025-3
S275NLH 1.0497 1.1 EN 10210-1, EN 10219-1
S315MC 1.0972 1.2 EN 10149-2
S315NC 1.0973 1.2 EN 10149-3
S320GP 1.0046 1.2 EN 10248-1
S355 G4+M 1.8803+M 1.2 EN 10225
S355G1 1.8814 1.2 EN 10225
S355G1+N 1.8814+N 1.2 EN 10225
S355G10+M 1.8813+M 1.2 EN 10225
S355G10+N 1.8813+N 1.2 EN 10225
S355G11 1.8806 1.2 EN 10225
S355G11+M 1.8806+M 1.2 EN 10225
S355G11+N 1.8806+N 1.2 EN 10225
S355G12 1.8809 1.2 EN 10225
S355G12+M 1.8809+M 1.2 EN 10225
S355G12+N 1.8809+N 1.2 EN 10225
S355G13+N 1.1182+N 1.2 EN 10225
S355G13+Q 1.1182+Q 1.2 EN 10225
S355G14+N 1.1184+N 1.2 EN 10225
S355G14+Q 1.1184+Q 1.2 EN 10225
S355G15+N 1.1190+N 1.2 EN 10225
S355G15+Q 1.1190+Q 1.2 EN 10225
S355G15+Q 1.8852+Q 1.2 EN 10225
© ISO 2009 – All rights reserved 11
---------------------- Page: 23 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S355G1N 1.8814+N 1.2 EN 10225
S355G2+N 1.8801+N 1.2 EN 10225
S355G3+N 1.8802+N 1.2 EN 10225
S355G4 1.8803 1.2 EN 10225
S355G4+M 1.8803+M 1.2 EN 10225
S355G5+M 1.8804+M 1.2 EN 10225
S355G6+M 1.8805+M 1.2 EN 10225
S355G7+M 1.8808+M 1.2 EN 10225
S355G7+N 1.8808+N 1.2 EN 10225
S355G8+M 1.8810+M 1.2 EN 10225
S355G8+N 1.8810+N 1.2 EN 10225
S355G9+M 1.8811+M 1.2 EN 10225
S355G9+N 1.8811+N 1.2 EN 10225
S355GP 1.0083 1.2 EN 10248-1
S355J0 1.0553 1.2 EN 10025-2
S355J0C 1.0554 1.2 EN 10025-2
S355J0H 1.0547 1.2 EN 10210-1, EN 10219-1
S355J0W 1.8959 1.4 EN 10025-5
S355J0WP 1.8945 1.4 EN 10025-5
S355J2 1.0577 1.2 EN 10025-2
S355J2C 1.0579 1.2 EN 10025-2
S355J2G3 1.0570 1.2 EN 10250-2
S355J2G3C 1.0569 1.1 EN 10277-2
S355J2H 1.0576 1.2 EN 10210-1, EN 10219-1
S355J2W 1.8965 1.4 EN 10025-5
S355J2WP 1.8946 1.4 EN 10025-5
S355JR 1.0045 1.2 EN 10025-2
S355JRC 1.0551 1.2 EN 10025-2
S355K2 1.0596 1.2 EN 10025-2
S355K2C 1.0594 1.2 EN 10025-2
S355K2G3C 1.0593 1.2 EN 10025-2
S355K2G4C 1.0594 1.2 EN 10025-2
S355K2W 1.8967 1.4 EN 10025-5
S355M 1.8823 1.2 EN 10025-4
S355MC 1.0976 1.2 EN 10149-2
S355MH 1.8845 1.2 EN 10219-1
12 © ISO 2009 – All rights reserved
---------------------- Page: 24 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S355ML 1.8834 1.2 EN 10025-4
S355MLH 1.8846 1.2 EN 10219-1
S355N 1.0545 1.2 EN 10025-3
S355NC 1.0977 1.2 EN 10149-3
S355NH 1.0539 1.2 EN 10210-1, EN 10219-1
S355NL 1.0546 1.2 EN 10025-3
S355NLH 1.549 1.2 EN 10210-1, EN 10219-1
S390GP 1.0522 1.3 EN 10248-1
S420G1+M 1.8830+M 2.1 EN 10225
S420G1+M 1.8830 2.1 EN 10225
S420G1+Q 1.8830+Q 3.1 EN 10225
S420G1+Q 1.8830 3.1 EN 10225
S420G2+M 1.8857+M 2.1 EN 10225
S420G2+M 1.8857 2.1 EN 10225
S420G2+Q 1.8857+Q 3.1 EN 10225
S420G2+Q 1.8857 3.1 EN 10225
S420G3 1.8851 1.3 EN 10225
S420G3+M 1.8851+M 2.1 EN 10225
S420G4 1.8859 1.3 EN 10225
S420G4+M 1.8859+M 2.1 EN 10225
S420G5+Q 1.8853+Q 3.1 EN 10225
S420G6+Q 1.8852+Q 3.1 EN 10225
S420M 1.8825 2.1 EN 10025-4
S420MC 1.0980 2.1 EN 10149-2
S420MH 1.8847 2.1 EN 10219-1
S420ML 1.8836 2.1 EN 10025-4
S420MLH 1.8848 2.1 EN 10219-1
S420N 1.8902 1.3 EN 10025-3
S420NC 1.0981 1.3 EN 10149-3
S420NL 1.8912 1.3 EN 10025-3
S430GP 1.0523 1.3 EN 10248-1
S450J0O 1.0590 1.3 EN 10025-2
S460G1+M 1.8878+M 2.1 EN 10225
S460G1+Q 1.8878+Q 3.1 EN 10225
S460G2+M 1.8887+M 2.1 EN 10225
S460G2+Q 1.8887+Q 3.1 EN 10225
© ISO 2009 – All rights reserved 13
---------------------- Page: 25 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S460G3 1.8883 1.3 EN 10225
S460G3+M 1.8883+M 2.1 EN 10225
S460G4 1.8889 1.3 EN 10225
S460G4+M 1.8889+M 2.1 EN 10225
S460G5+Q 1.8885+Q 3.1 EN 10225
S460G6+Q 1.8884+Q 3.1 EN 10225
S460M 1.8827 2.1 EN 10025-4
S460MC 1.0982 2.1 EN 10149-2
S460MH 1.8849 2.1 EN 10219-1
S460ML 1.8838 2.1 EN 10025-4
S460MLH 1.8850 2.1 EN 10219-1
S460N 1.8901 1.3 EN 10025-3
S460NH 1.8953 1.3 EN 10210-1, EN 10219-1
S460NL 1.8903 1.3 EN 10025-3
S460NLH 1.8956 1.3 EN 10210-1, EN 10219-1
S460Q 1.8908 3.1 EN 10025-6
S460QL 1.8906 3.1 EN 10025-6
S460QL1 1.8916 3.1 EN 10025-6
S500A 1.8980 3.3 EN 10137-3
S500AL 1.8990 3.3 EN 10137-3
S500Q 1.8924 3.1 EN 10025-6
S500QL 1.8909 3.1 EN 10025-6
S500QL1 1.8984 3.1 EN 10025-6
S550A 1.8991 3.3 EN 10137-3
S550AL 1.8992 3.3 EN 10137-3
S550MC 1.0986 2.2 EN 10149-2
S550Q 1.8904 3.1 EN 10025-6
S550QL 1.8926 3.1 EN 10025-6
S550QL1 1.8986 3.1 EN 10025-6
S600MC 1.8969 2.1 EN 10149-2
S620A 1.8993 3.3 EN 10137-3
S620AL 1.8994 3.3 EN 10137-3
S620Q 1.8914 3.1 EN 10025-6
S620QL 1.8927 3.1 EN 10025-6
S620QL1 1.8987 3.1 EN 10025-6
S650MC 1.8976 2.1 EN 10149-2
14 © ISO 2009 – All rights reserved
---------------------- Page: 26 ----------------------
SIST-TP CEN ISO/TR 20172:2013
ISO/TR 20172:2009(E)
Table 1 (continued)
Designation
Group Standard(s)
Name Number
S690A 1.8995 3.3 EN 10137-3
S690AL 1.8996 3.3 EN 10137-3
S690Q 1.8931 3.1 EN 10025-6
S690QL 1.8928 3.1 EN 10025-6
S690QL1 1.8988 3.1 EN 10025-6
S700MC 1.8974 2.1 EN 10149-2
S890Q 1.8940 3.2 EN 10025-6
S890QL 1.8983 3.2 EN 10025-6
S890QL1 1.8925 3.2 EN 10025-6
S960Q 1.8941 3.2 EN 10025-6
S960QL 1.8933 3.2 EN 10025-6
X105CrMo17 1.4125 7.2 EN 10088-1
X10CrAlSi13 1.4724 7.1 EN 10088-1
X10CrAlSi18 1.4742 7.1 EN 10088-1
X10CrAlSi25 1.4762 7.1 EN 10088-1
X10CrMoVNb9-1 1.4903 6.4 EN 10216-2, EN 10222-2
X10CrNi18-8 1.4310 8.1 EN 10088-1
X10CrNiMoMnNbVb15-10-1 1.4981 8.1 EN 10088-1
X10CrNiMoMnNbVB15-10-1 1.4982 8.1 EN 10216-5
X10Ni9 1.5682 9.3 EN 10216-4
X11CrMo5+L 1.7362+L 5.3 EN 10216-2
X11CrMo5+NT1 1.7362+NT1 5.3 EN 10216-2
X11CrMo5+NT2 1.7362+NT2 5.3 EN 10216-
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.