EN ISO 9202:2016
(Main)Jewellery - Fineness of precious metal alloys (ISO 9202:2014)
Jewellery - Fineness of precious metal alloys (ISO 9202:2014)
ISO 9202:2014 specifies a range of fineness of precious metal alloys (excluding solders) recommended for use in the field of jewellery.
National legal requirements for the designation, marking, and stamping of finished articles in the respective countries have to be taken into account.
Schmuck - Feingehalt von Edelmetalllegierungen (ISO 9202:2014)
Diese Internationale Norm legt Feingehalte für Edelmetalllegierungen (ausgenommen Lote) fest, die für die Anwendung im Schmuckbereich empfohlen werden.
Nationale gesetzliche Anforderungen für die Bezeichnung, Kennzeichnung und Prägung von Erzeugnissen sind entsprechend dem im jeweiligen Land gültigen Festlegungen in Betracht zu ziehen.
Joaillerie, bijouterie - Titre des alliages de métaux précieux (ISO 9202:2014)
L'ISO 9202:2014 spécifie les titres des alliages de métaux précieux (à l'exception des soudures) d'usage recommandé en joaillerie.
Les exigences légales nationales relatives à la désignation, au marquage et au poinçonnage des articles finis sont à respecter dans les pays en question.
Nakit - Čistine zlitin plemenitih kovin (ISO 9202:2014)
Standard ISO 9202:2014 določa razpon čistosti zlitin plemenitih kovin (brez spajk), uporaba katerega je priporočena na področju zlatarstva.
Upoštevati je treba nacionalne pravne zahteve za označevanje in žigosanje končnih izdelkov posameznih držav.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2016
1DGRPHãþD
SIST EN 29202:1998
1DNLWýLVWLQH]OLWLQSOHPHQLWLKNRYLQ ,62
Jewellery - Fineness of precious metal alloys (ISO 9202:2014)
Schmuck - Feingehalt von Edelmetalllegierungen (ISO 9202:2014)
Joaillerie - Titre des alliages de métaux précieux (ISO 9202:2014)
Ta slovenski standard je istoveten z: EN ISO 9202:2016
ICS:
39.060 Nakit Jewellery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 9202
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2016
EUROPÄISCHE NORM
ICS 39.060 Supersedes EN 29202:1992
English Version
Jewellery - Fineness of precious metal alloys (ISO
9202:2014)
Joaillerie, bijouterie - Titre des alliages de métaux Schmuck - Feingehalt von Edelmetalllegierungen (ISO
précieux (ISO 9202:2014) 9202:2014)
This European Standard was approved by CEN on 26 August 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9202:2016 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 9202:2014 has been prepared by Technical Committee ISO/TC 174 “Jewellery” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 9202:2016.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall be
withdrawn at the latest by April 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 29202:1992.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 9202:2014 has been approved by CEN as EN ISO 9202:2016 without any modification.
INTERNATIONAL ISO
STANDARD 9202
Second edition
2014-12-01
Jewellery — Fineness of precious
metal alloys
Joaillerie — Titre des alliages de métaux précieux
Reference number
ISO 9202:2014(E)
©
ISO 2014
ISO 9202:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 9202:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Analytical methods for determining fineness . 1
5 Range of fineness .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.