EN 4800-002:2010
(Main)Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar and section
This standard defines the requirements for the ordering, manufacture, testing, inspection and delivery of titanium and titanium alloy bar and section. It shall be applied when referred to and in conjunction with the EN material standard unless otherwise specified on the drawing, order or inspection schedule.
Luft- und Raumfahrt - Titan und Titanlegierungen - Technische Lieferbedingungen - Teil 002: Stangen und Profile
Diese Norm legt die Anforderungen an die Bestellung, Herstellung, Prüfung, Inspektion und Lieferung von
Stangen und Profilen aus Titan und Titanlegierungen fest. Sie ist anzuwenden, wenn sie bei Verweisung auf
oder in Verbindung mit der EN-Werkstoffnorm erwähnt wird, sofern in der Zeichnung, Bestellung oder der
Prüfanweisung nichts anderes angegeben ist.
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 002 : Barres et profilés
Cette Norme européenne définit les exigences relatives aux commandes, fabrication, essais, contrôles et livraison des barres et profilés en titane et alliages de titane. La présente norme est applicable lorsqu'elle est citée dans la norme de matériaux EN et conjointement avec celle-ci, sauf instruction contraire figurant sur le plan, la commande ou la fiche d’essais.
Aeronavtika - Titan in titanove zlitine - Tehnična specifikacija - 002. del: Palice in profili
Ta standard določa zahteve za naročanje, proizvodnjo, preskušanje, pregledovanje in dobavo palic in profilov iz titana in titanovih zlitin, odpornih proti vročini. Uporablja se, kadar se nanaša na standard EN za materiale in skupaj z njim, razen če je drugače določeno na risbi, naročilu ali urniku pregleda.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4800-002:2011
01-december-2011
$HURQDYWLND7LWDQLQWLWDQRYH]OLWLQH7HKQLþQDVSHFLILNDFLMDGHO 3DOLFHLQ
SURILOL
Aerospace series - Titanium and titanium alloys - Technical specification - Part 002: Bar
and section
Luft- und Raumfahrt - Titan und Titanlegierungen Kneterzeugnisse - Technische
Lieferbedingungen - Teil 002: Stangen und Profile
Série aérospatiale - Titane et alliages de titane - Spécification technique - Partie 002:
Barres et profilés
Ta slovenski standard je istoveten z: EN 4800-002:2010
ICS:
49.025.30 Titan Titanium
SIST EN 4800-002:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4800-002:2011
---------------------- Page: 2 ----------------------
SIST EN 4800-002:2011
EUROPEAN STANDARD
EN 4800-002
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 49.025.30
English Version
Aerospace series - Titanium and titanium alloys - Technical
specification - Part 002: Bar and section
Série aérospatiale - Titane et alliages de titane - Luft- und Raumfahrt - Titan und Titanlegierungen
Spécification technique - Partie 002: Barres et profilés Kneterzeugnisse - Technische Lieferbedingungen - Teil
002: Stangen und Profile
This European Standard was approved by CEN on 20 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4800-002:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4800-002:2011
EN 4800-002:2010 (E)
Contents Page
Foreword .3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .7
4 Wording of order .7
5 Health and safety .7
6 Technical requirements .7
2
---------------------- Page: 4 ----------------------
SIST EN 4800-002:2011
EN 4800-002:2010 (E)
Foreword
This document (EN 4800-002:2010) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.