EN 13765:2010

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification

This European Standard specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore sizes from 25 mm to 300 mm, working pressures from 4 bar1 to 14 bar and working temperatures from -30 °C to 150 °C.

Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation

Diese Europäische Norm legt Anforderungen für vier Typen thermoplastischer, mehr¬lagiger (nicht vulkani-sierte) Schläuche und Schlauchleitungen zur Förderung von Kohlen¬wasserstoffen, Lösungsmitteln und Chemikalien fest. Sie legt Bohrungsdurchmesser von 25 mm bis 300 mm, Betriebsdrücke von 4 bar ) bis 14 bar und Betriebstemperaturen von 30 °C bis 150 °C fest.
Der Schlauchtyp 1 ist geeignet für die Anwendung mit Gas. Die Schlauch¬typen 2 bis 4 sind für Anwendungen mit Flüssigkeit geeignet.
ANMERKUNG 1   Der Anwender wird auf Anhang A verwiesen, der die Werkstoffauswahl für die Innenwände der Lagen und der polymeren Überzüge der inneren Drahtwendel bezüglich der durch die Schläuche und/oder Schlauchleitungen zu fördernden Chemikalien betrifft.
ANMERKUNG 2   Wenn ein polymerbeschichteter Draht für die Anwendung mit schwach leitenden Kohlenwasserstoffen oder Chemikalien vorgesehen ist, sollte der Hersteller zurate gezogen werden.
Diese Europäische Norm gilt nicht für Schläuche und Schlauchleitungen für:
-   Flugzeugbetankung (EN 1361);
-   Zapfstellenschläuche (EN 1360);
-   Ölbrenner (EN ISO 6806);
-   Flüssiggas und Flüssigerdgas (EN 13766);
-   Feuerwehrschläuche (EN ISO 14775);
-   Offshore Flüssigerdgas (EN 1474 2);
-   Kühlkreisläufe.

Tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - Spécifications

La présente Norme européenne spécifie les exigences relatives à quatre types de tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) utilisés pour le transport d’hydrocarbures, de solvants et de produits chimiques. Elle spécifie des diamètres de passage compris entre 25 mm et 300 mm, des pressions de service comprises entre 4 bar ) et 14 bar et des températures d’utilisation comprises entre  30 °C et 150 °C.
Les tuyaux de type 1 conviennent aux applications de la vapeur. Les tuyaux de types 2 à 4 conviennent à l’utilisation de liquides.
NOTE 1   L’attention des utilisateurs est attirée sur l’Annexe A concernant le choix du matériau du revêtement intérieur des couches et de tout revêtement polymère de l’hélice intérieure en contact avec le(s) produit(s) chimique(s) à transporter dans les tuyaux et/ou assemblages flexibles.
NOTE 2   Il convient de consulter le fabricant lorsque l’utilisation d’un fil interne avec revêtement polymère est prévue pour être en contact avec des produits chimiques ou des hydrocarbures de basse conductivité.

Plastomerne večslojne (nevulkanizirane) cevi in cevni priključki za pretok ogljikovodikov, topil in kemikalij - Specifikacija

Ta evropski standard določa zahteve za štiri tipe plastomernih večslojnih (nevulkaniziranih) cevi in cevnih priključkov za pretok ogljikovodikov, topil in kemikalij. Določa velikosti odprtine med 25 mm in 300 mm, delovne tlake med 4 bar in 14 bar ter delovne temperature med -30 °C in 150 °C.

General Information

• Status: Withdrawn
• Publication Date: 27-Apr-2010
• Withdrawal Date: 10-Mar-2015
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 11-Mar-2015
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Ref Project: SIST EN 13765:2011 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification

Relations

• Replaces: EN 13765:2003 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
• Effective Date: 01-May-2010
• Merged Into: EN 13765:2010+A1:2015 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
• Effective Date: 10-Dec-2014
• Amended By: EN 13765:2010/FprA1 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
• Effective Date: 11-Sep-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - SpezifikationTuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - SpécificationsThermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification83.140.40Gumene ceviHosesICS:Ta slovenski standard je istoveten z:EN 13765:2010SIST EN 13765:2011en,fr,de01-november-2011SIST EN 13765:2011SLOVENSKI
STANDARDSIST EN 13765:20031DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13765
April 2010 ICS 23.040.70 Supersedes EN 13765:2003English Version
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
Tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - Spécifications
Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation This European Standard was approved by CEN on 18 March 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13765:2010: ESIST EN 13765:2011

Resistance to chemical(s) conveyed . 11Annex B (normative)
Carbon steel wire . 12B.1Manufacture . 12B.2Condition of finished wire . 12B.3Properties . 13Annex C (normative)
Galvanized zinc coating . 14C.1Adhesion of coating . 14C.2Minimum mass of coating . 14Annex D (normative)
Method of test for crush recovery . 15Annex E (normative)
Method of test for fuel resistance . 17Annex F (normative)
Method of test for thermal ageing . 18Annex G (normative)
Method of test for flammability . 19Annex H (normative)
Sequence of hydrostatic tests . 21Annex I (normative)
Method of test for fitting security . 22Annex J (normative)
Method of test for leak tightness . 23Annex K (normative)
Type and routine tests for hoses and hose assemblies . 24Annex L (informative)
Batch tests for hoses and hose assemblies . 25 SIST EN 13765:2011

2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 590, Automotive fuels — Diesel — Requirements and test methods EN 10088-3:2005, Stainless steels — Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes EN ISO 1043-1:2001, Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics (ISO 1043-1:2001) EN ISO 1402:2009, Rubber and plastics hoses and hose assemblies — Hydrostatic testing (ISO 1402:2009) EN ISO 1746, Rubber or plastics hoses and tubing — Bending tests (ISO 1746:1998, including technical corrigendum 1:1999) EN ISO 2411, Rubber — or plastics-coated fabrics — Determination of coating adhesion (ISO 2411:2000)
1) 1 bar = 0,1 MPa. SIST EN 13765:2011

(ISO 7326:2006) EN ISO 8031:2009, Rubber and plastics hoses and hose assemblies — Determination of electrical resistance
(ISO 8031:2009) EN ISO 8330:2008, Rubber and plastics hoses and hose assemblies — Vocabulary (ISO 8330:2007) ISO 209, Aluminium and aluminium alloys — Chemical composition ISO 1817:2005, Rubber, vulcanised — Determination of the effect of liquids 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 8330:2008 apply. 4 Classification Hoses shall be classified according to working pressure and working temperature range as given in Table 1. Table 1 — Pressure and temperature range
Type 1 Type 2 Type 3 Type 4 Maximum working pressure (bar) 4 10 14 14 Proof pressure (bar) 6 15 21 21 Minimum burst pressure (bar) 16 40 56 56 Vacuum rating (bar) 0,5 0,9 0,9 0,9 Working temperature range (°C) − 20 to + 60
− 30 to + 80
− 30 to + 80
− 30 to + 150 NOTE 1 bar = 0,1 MPa.
5 Materials and construction 5.1 General Hoses shall be constructed as shown in Figure 1 and shall consist of the following: SIST EN 13765:2011
...