iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 8330:2008

(Main)

Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2007)

Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2007)

ISO 8330:2006 defines, in English and in French, terms used in the rubber hose industry.
The standard has been divided into two sections, one for hose terms and the other for hose assembly terms.

Gummi- und Kunststoffschläuche und -schlauchleitungen - Vokabular (ISO 8330:2007)

Tuyaux et flexibles en caoutchouc et en plastique - Vocabulaire (ISO 8330:2007)

L'ISO 8330:2006 définit, en anglais et en français, les termes utilisés dans l'industrie des tuyaux.
La présente norme a été divisée en deux sections, l'une pour les termes relatifs aux tuyaux et l'autre pour les termes relatifs aux flexibles de raccordement.

Gumene in polimerne cevi in cevni priključki - Slovar (ISO 8330:2007)

General Information

Status
Withdrawn
Publication Date
18-Mar-2008
Withdrawal Date
19-Aug-2014
ICS
01.040.23 - Fluid systems and components for general use (Vocabularies)
01.040.83 - Rubber and plastics industries (Vocabularies)
23.040.70 - Hoses and hose assemblies
Technical Committee
CEN/TC 218 - Rubber and plastics hoses and hose assemblies
Drafting Committee
CEN/TC 218 - Rubber and plastics hoses and hose assemblies
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
20-Aug-2014
Ref Project
SIST EN ISO 8330:2009 - Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2007)

Relations

Replaces
EN ISO 8330:2000 - Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:1998)
Effective Date
22-Dec-2008
Replaced By
EN ISO 8330:2014 - Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 8330:2009EN ISO 8330:2009
PreviousNext
Standard
EN ISO 8330:2009
English and French language
47 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8330:2009
01-februar-2009
1DGRPHãþD
SIST EN ISO 8330:2000
*XPHQHLQSROLPHUQHFHYLLQFHYQLSULNOMXþNL6ORYDU ,62
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2007)
Einführendes Element - Haupt-Element - Ergänzendes Element (ISO 8330:2007)
Tuyaux et flexibles en caoutchouc et en plastique - Vocabulaire (ISO 8330:2007)
Ta slovenski standard je istoveten z: EN ISO 8330:2008
ICS:
01.040.23 7HNRþLQVNLVLVWHPLLQVHVWDYQL Fluid systems and
GHOL]DVSORãQRUDER 6ORYDUML components for general use
(Vocabularies)
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 8330:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8330:2009

---------------------- Page: 2 ----------------------

SIST EN ISO 8330:2009
EUROPEAN STANDARD
EN ISO 8330
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2008
ICS 23.040.70; 01.040.23 Supersedes EN ISO 8330:2000
English Version
Rubber and plastics hoses and hose assemblies - Vocabulary
(ISO 8330:2007)
Tuyaux et flexibles en caoutchouc et en plastique -
Vocabulaire (ISO 8330:2007)
This European Standard was approved by CEN on 29 February 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8330:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8330:2009
EN ISO 8330:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 8330:2009
EN ISO 8330:2008 (E)
Foreword
The text of ISO 8330:2007 has been prepared by Technical Committee ISO/TC 45 “Rubber and rubber
products” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
8330:2008 by Technical Committee CEN/TC 218 “Rubber and plastics hoses and hose assemblies” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2008, and conflicting national standards shall be
withdrawn at the latest by September 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8330:2000.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8330:2007 has been approved by CEN as a EN ISO 8330:2008 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 8330:2009

---------------------- Page: 6 ----------------------

SIST EN ISO 8330:2009
INTERNATIONAL ISO

STANDARD 8330
NORME
Second edition
Deuxième édition
INTERNATIONALE
2007-06-15

Rubber and plastics hoses and hose
assemblies — Vocabulary
Tuyaux et flexibles en caoutchouc et en
plastique — Vocabulaire





Reference number
Numéro de référence
ISO 8330:2007(E/F)
©
 ISO 2007

---------------------- Page: 7 ----------------------

SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 12625-5:2024(Main)
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2024)
SIST EN ISO 12625-5:2024

This document specifies a test method for the determination of the wet tensile strength of tissue paper and tissue products after soaking with water, using a tensile-strength-testing apparatus operating with a constant rate of elongation.
Currently, two types of tensile-strength-testing apparatus are commercially available, one where the test piece is positioned vertically and, for the other, horizontally. This document applies for both. For vertical tensile-strength-testing apparatus, a device that is held in the lower grip of the tensile-strength-testing apparatus, called a Finch Cup, is used to achieve the wetting. For horizontal tensile-strength-testing apparatus, the soaking device is placed between the two clamps.
This document is not applicable to cases where impurities and contraries are determined.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 5601:2024(Main)
Paints and varnishes - Determination of volatile organic compound (VOC) and/or semi-volatile organic compound (SVOC) content - Best practices for the selection of test methods (ISO/TR 5601:2023)
kSIST-TP FprCEN ISO/TR 5601:2024

This document aims to enable users to identify an appropriate method for the determination of volatile organic compounds (VOC) content and/or the semi-volatile organic compounds (SVOC) content of coating materials and their raw materials. This document provides a step-by-step procedure for identifying appropriate tests. This document is intended to be used in conjunction with ISO 11890-1, ISO 11890-2 and ISO 17895, to help users select an appropriate analytical method for their analytical problem.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-1:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 1: Middle distillates and diesel fuels
kSIST FprEN 12662-1:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in middle distillates, in diesel fuels containing up to 30 % (V/V) fatty acid methyl esters (FAME). The working range is from 12 mg/kg to 26 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [4].
This document in general is applicable to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C.
This test method can be used for paraffinic diesel fuels as specified in EN 15940, for diesel fuels containing more than 30 % (V/V) FAME and for petroleum products having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17830:2024(Main)
Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2024)
kSIST FprEN ISO 17830:2024

This document specifies the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17827-2:2024(Main)
Solid biofuels - Determination of particle size distribution for uncompressed fuels - Part 2: Vibrating screen method using sieves with aperture of 3,15 mm and below (ISO 17827-2:2024)
kSIST FprEN ISO 17827-2:2024

This document specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely, materials that either have been reduced in size, such as most wood fuels, or are physically in a particulate form. This document applies to particulate uncompressed fuels with a nominal top size of 3,15 mm and below (e.g. sawdust).

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12662-2:2024(Main)
Liquid petroleum products - Determination of total contamination - Part 2: Fatty acid methyl esters
kSIST FprEN 12662-2:2024

This document specifies a method for the determination of the content of undissolved substances, referred to as total contamination, in neat fatty acid methyl esters (FAME). The working range is from 5 mg/kg to 27 mg/kg and it was established in an interlaboratory study by applying EN ISO 4259-1 [1].
This document in general is applicable to FAME having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, e.g. as specified in EN 14214 [2].
This test method can be used for FAME having a kinematic viscosity exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, however in such cases the precision of the test method has not been determined.
NOTE   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction, φ, of a material.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17952:2024(Main)
Value Management - Function Analysis: Basic characteristics, requirements and guidance for implementation
SIST EN 17952:2024

This document presents Function Analysis (FA) and specifies requirements for Function Analysis and its deliverables. It presents the two distinct areas of application, namely, Functional Need Analysis (FNA) relating to understanding the need, setting goals and Technical Function Analysis (TFA) relating to selecting and developing a solution. It specifies requirements for the basic characteristics of the deliverables within FNA and TFA and expands requirements, guidance and recommendations about FA expressed in the Functional Performance Specification Standard (EN 16271) and in the Value Management Standard (EN 12973).
This document provides an essential reference and support for any person wishing to improve the efficiency, effectiveness and overall performance of their organization. It aims to support sustainable development in an organization. FA offers an opportunity to enhance skills of people involved.
In order to present the conditions for implementation and development of FA deliverables, this document:
•   introduces the interests and fields of application and presents a variety of situations in which FA is used in support of projects of all types and sizes;
•   specifies essential conditions for successful FA, including roles and responsibilities of the people involved, monitoring the performance of the FA team, processes for validation and verification and supply of valid and verified deliverables; and
•   specifies requirements for FA and the basic characteristics of FA deliverables whilst outlining methods, and tools for the realization of the deliverables.
FA is progressed using the following:
•   FNA: support for the process of identifying and understanding the need, defining objectives, and setting the goal to be achieved;
•   TFA: support for design or research processes and evaluation of solutions; and
•   Iteratively focusing on the FNA and TFA by revisiting the identified need, balancing capabilities of available technologies, resources and constraints, achieving the most desirable outcome.
In the area of FNA, this document sets out FNA requirements for the deliverables to establish the Functional Need Expression (FNE). The FNE can serve as a basis for establishing an understanding of the expressed need, the complete list of User Related Functions (URFs), constraints and interfaces. These deliverables serve as a basis for identifying, organizing, characterizing and prioritizing functions and function interfaces. These deliverables can also support preliminary risk and reliability studies, economic studies, impact assessments and development of Functional Performance Specifications (FPSs).
In the area of TFA, this document sets out requirements for TFA deliverables which aim to satisfy the need, expressed in the FNE. The TFA deliverables are focused on analysing existing and potential solutions, identifying a complete list of the Product Related Functions (PRFs) to meet the FNE; evaluating concepts and making a choice for a solution then optimizing the Product Function Architecture (PFA) to identify the “best” solution.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17956:2024(Main)
Energy efficiency classes for technical insulation systems - Calculation method and applications
SIST EN 17956:2024

This document is applicable to technical insulation systems of operational installations in industry and the building services, such as pipes, ducts, vessels, equipment and built-in components.
The document specifies methods for the energy efficiency classification of insulation systems for the abovementioned components with an operational temperature range of −30 °C up to 650 °C.
The document addresses plant operators, engineers of operational installations, as well as the involved contractors such as insulation contractors and pipefitting contractors.
The design of safe surface temperatures for personal protection, as well as the prevention of condensation, is outside the scope of this document.
This document also does not apply to water-based heating and cooling systems in buildings and does not apply to directly buried district heating and district cooling pipes.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1865-2:2024(Main)
Patient handling equipment used in ambulances - Part 2: Power assisted stretcher
kSIST FprEN 1865-2:2024

This document specifies minimum requirements for the design and performance of power assisted stretchers used in road ambulances for the treatment and transportation of patients. It aims to ensure patient safety and minimize the physical effort required by staff operating the equipment.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8840:2024(Main)
Refractory materials - Determination of bulk density of granular materials (grain density) (ISO 8840:2021)
SIST EN ISO 8840:2024

As per ISO document i.e.
This document specifies three methods for the determination of the bulk density of granular
refractory materials (grain density) having a grain size larger than 2 mm:
— Method 1: mercury method with vacuum;
— Method 2: arrested water absorption method;
— Method 3: vacuum method with spin dryer option according to ISO 5017.
Method 1 is intended as the reference method.
NOTE  Depending on the nature of the material tested, the three methods can give different results.
Any statement of the value of a bulk density can therefore be accompanied by an indication of the
method used or to be used in case of dispute.
The same method can be used for the determination of the volume of the sample, for selecting and
preparing the sample, for
calculating the bulk density and for presenting the test report.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day