EN ISO 1402:2009
(Main)Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
ISO 1402:2009 specifies methods for the hydrostatic testing of rubber and plastics hoses and hose assemblies, including methods for the determination of dimensional stability.
Gummi- und Kunststoffschläuche und Schlauchleitungen - Hydrostatische Prüfung (ISO 1402:2009)
In dieser Internationalen Norm werden Verfahren für die hydrostatische Prüfung von Gummi- und Kunststoffschläuchen und Schlauchleitungen sowie Verfahren zur Bestimmung der Maßstabilität festgelegt.
Tuyaux et flexibles en caoutchouc et en plastique - Essais hydrostatiques (ISO 1402:2009)
L'ISO 1402:2009 spécifie des méthodes d'essais hydrostatiques pour les tuyaux et flexibles en caoutchouc et en plastique, y compris des méthodes de détermination de la stabilité dimensionnelle.
Gumene in polimerne cevi ter cevni priključki - Hidrostatično preskušanje (ISO 1402:2009)
Ta mednarodni standard določa metode za hidrostatično preskušanje gumenih in polimernih cevi ter cevnih priključkov, vključno z metodami za določevanje dimenzijske stabilnosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1402:2010
01-februar-2010
1DGRPHãþD
SIST EN ISO 1402:2000
*XPHQHLQSROLPHUQHFHYLWHUFHYQLSULNOMXþNL+LGURVWDWLþQRSUHVNXãDQMH ,62
Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009)
Gummi- und Kunststoffschläuche und -schlauchleitungen - Hydrostatische Prüfung (ISO
1402:2009)
Tuyaux et flexibles en caoutchouc et en plastique - Essais hydrostatiques (ISO
1402:2009)
Ta slovenski standard je istoveten z: EN ISO 1402:2009
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN ISO 1402:2010 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1402:2010
---------------------- Page: 2 ----------------------
SIST EN ISO 1402:2010
EUROPEAN STANDARD
EN ISO 1402
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2009
ICS 23.040.70 Supersedes EN ISO 1402:1996
English Version
Rubber and plastics hoses and hose assemblies - Hydrostatic
testing (ISO 1402:2009)
Tuyaux et flexibles en caoutchouc et en plastique - Essais Gummi- und Kunststoffschläuche und -schlauchleitungen -
hydrostatiques (ISO 1402:2009) Hydrostatische Prüfung (ISO 1402:2009)
This European Standard was approved by CEN on 26 September 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1402:2009: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1402:2010
EN ISO 1402:2009 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 1402:2010
EN ISO 1402:2009 (E)
Foreword
This document (EN ISO 1402:2009) has been prepared by Technical Committee ISO/TC 45 "Rubber and
rubber products" in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and
hose assemblies”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2010, and conflicting national standards shall be withdrawn at the
latest by April 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 1402:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 1402:2009 has been approved by CEN as a EN ISO 1402:2009 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 1402:2010
---------------------- Page: 6 ----------------------
SIST EN ISO 1402:2010
INTERNATIONAL ISO
STANDARD 1402
Fourth edition
2009-10-15
Rubber and plastics hoses and hose
assemblies — Hydrostatic testing
Tuyaux et flexibles en caoutchouc et en plastique — Essais
hydrostatiques
Reference number
ISO 1402:2009(E)
©
ISO 2009
---------------------- Page: 7 ----------------------
SIST EN ISO 1402:2010
ISO 1402:2009(E)
PDF disclaim
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.