Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints (ISO 8795:2001)

This standard specifies a method for the determination of the migration of constituents from the internal surface of plastic pipes, fittings and joints. Organoleptic and microbiological assessments are not included. This standard is applicable to all plastics pipes, fittings and joints to be used for the transport of water intended for human consumption and raw water used for the manufacturing of water intended for human consumption.

Kunststoff-Rohrleitungssysteme für den Transport von Wasser für den menschlichen Verzehr - Bewertung der Migration - Bestimmung der Migrationswerte von Rohren und Formstücken aus Kunststoff und deren Verbindungen (ISO 8795:2001)

Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Migration von Bestandteilen aus der inneren Oberfläche von Rohren, Formstücken und Verbindungen aus Kunststoff fest. Organoleptische und mikrobiologische Beurteilungen sind nicht enthalten. Diese Norm ist auf alle Rohre, Formstücke und Verbindungen aus Kunststoff anwendbar, die zum Transport von Wasser für den menschlichen Verzehr und von Rohrwasser, das zur Aufbereitung von Wasser, das für den menschlichen Verzehr vorgesehen ist, verwendet werden.

Systèmes de canalisations plastiques pour le transport d'eau destinée à la consommation humaine - Evaluation de la migration - Détermination des valeurs de migration des tubes et raccords plastiques et de leurs assemblages (ISO 8795:2001)

La norme internationale spécifie une méthode de détermination de la migration des constituants extraits de la face intérieure des tubes, raccords et assemblages en matières plastiques. Les déterminations  organoleptiques et microbiologiques ne sont pas comprises.  Cette norme est applicable à tous les tubes, raccords et assemblages   plastiques utilisables pour le transport de l'eau destinée à la consommation humaine et de l'eau brute utilisée pour la production  d'eau potable. Elle concerne tous les constituants d'un tube, raccord ou   assemblage terminé extractibles par l'eau. Elle fournit un mode opératoire de rechange pour le cas où la dimension du tube, du raccord ou de l'assemblage l'impose.  
NOTE 1 On suppose que les normes ou les règlements qui font référence à la présente norme comprennent l'information suivante (voir aussi la note de l'article 4):  a) le choix du (des) liquide(s) d'essai (voir 5.3);  b) le choix de la (les) température(s) (voir l'article 6) d'essai.  
NOTE 2 Les procédures de pré-traitement, liquides et températures d'essai mentionnés dans la présente norme couvrent la situation présente. Lorsque des conditions nouvelles et/ou différentes seront formulées (actuellement en discussion) la norme sera amendée en conséquence.

Cevni sistemi iz polimernih materialov za transport pitne vode - Vrednotenje migracije - 1. del: Določanje migracijskih vrednosti cevi iz plastomernih materialov, fitingov in spojev (ISO 8795:2001)

General Information

Status
Published
Publication Date
28-Feb-2001
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
08-Nov-2006
Completion Date
08-Nov-2006

Relations

Buy Standard

Standard
EN ISO 8795:2002
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 8795:2002
01-junij-2002
1DGRPHãþD
SIST EN 852-1:1997
&HYQLVLVWHPLL]SROLPHUQLKPDWHULDORY]DWUDQVSRUWSLWQHYRGH9UHGQRWHQMH
PLJUDFLMHGHO'RORþDQMHPLJUDFLMVNLKYUHGQRVWLFHYLL]SODVWRPHUQLK
PDWHULDORYILWLQJRYLQVSRMHY ,62
Plastics piping systems for the transport of water intended for human consumption -
Migration assessment - Determination of migration values of plastics pipes and fittings
and their joints (ISO 8795:2001)
Kunststoff-Rohrleitungssysteme für den Transport von Wasser für den menschlichen
Verzehr - Bewertung der Migration - Bestimmung der Migrationswerte von Rohren und
Formstücken aus Kunststoff und deren Verbindungen (ISO 8795:2001)
Systemes de canalisations plastiques pour le transport d'eau destinée a la
consommation humaine - Evaluation de la migration - Détermination des valeurs de
migration des tubes et raccords plastiques et de leurs assemblages (ISO 8795:2001)
Ta slovenski standard je istoveten z: EN ISO 8795:2001
ICS:
13.060.20 Pitna voda Drinking water
23.040.20 Cevi iz polimernih materialov Plastics pipes
SIST EN ISO 8795:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 8795:2002

---------------------- Page: 2 ----------------------

SIST EN ISO 8795:2002
EUROPEAN STANDARD
EN ISO 8795
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2001
ICS 23.040.20; 91.140.60 Supersedes EN 852-1:1996
English version
Plastics piping systems for the transport of water intended for
human consumption - Migration assessment - Determination of
migration values of plastics pipes and fittings and their joints
(ISO 8795:2001)
Systèmes de canalisations plastiques pour le transport Kunststoff-Rohrleitungssysteme für den Transport von
d'eau destinée à la consommation humaine - Evaluation de Wasser für den menschlichen Verzehr - Bewertung der
la migration - Détermination des valeurs de migration des Migration - Bestimmung der Migrationswerte von Rohren
tubes et raccords plastiques et de leurs assemblages (ISO und Formstücken aus Kunststoff und deren Verbindungen
8795:2001) (ISO 8795:2001)
This European Standard was approved by CEN on 10 August 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8795:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 8795:2002
Page 2
EN ISO 8795:2001
Contents
Page
Foreword .3
1 Scope.4
2 Normative references.4
3 Terms and definitions .4
4 Principle.5
5 Reagents.5
5.1 Test liquids.5
5.2 General requirements for the liquids .6
5.3 Selection of test liquids to perform the test.6
6 Test temperatures .6
7 Apparatus .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.