EN 13763-7:2025
(Main)Explosives for civil uses - Detonators and detonating cord relays - Part 7: Verification of pull-out resistance of detonators
Explosives for civil uses - Detonators and detonating cord relays - Part 7: Verification of pull-out resistance of detonators
This document specifies a method for determining the mechanical strength of electric detonators, electronic detonators and non-electronic detonators, leading wires/shock tubes, and their connections into the crimp/closure or sealing arrangement.
This method is applicable to explosives for civil uses.
Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverzögerer - Teil 7: Überprüfung des Auszugswiderstands von Zündern
Dieses Dokument legt ein Verfahren für die Bestimmung der mechanischen Festigkeit von elektrischen Zündern, elektronischen und nichtelektrischen Zündern, Zünderdrähten/Zündschläuchen und deren Verbindungen über Anwürgungen/Verschlüsse oder Verschlussstopfen fest.
Dieses Verfahren gilt für Explosivstoffe für zivile Zwecke.
Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 7 : Vérification de la résistance à l’arrachement des détonateurs
Le présent document spécifie une méthode de détermination de la résistance mécanique des fils d’amorces/tubes à transmission d’onde de choc des détonateurs électriques, des détonateurs électroniques et des détonateurs non électroniques, et de leurs raccords situés dans le sertissage/la fermeture ou autre type de bouchon.
La présente méthode s’applique aux explosifs à usage civil.
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 7. del: Preverjanje odpornosti detonatorjev proti izvleku
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2025
Eksplozivi za civilno uporabo - Detonatorji in zakasnilniki - 7. del: Preverjanje
odpornosti detonatorjev proti izvleku
Explosives for civil uses - Detonators and detonating cord relays - Part 7: Verification of
pull-out resistance of detonators
Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverzögerer - Teil 7:
Überprüfung des Auszugswiderstands von Zündern
Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 7 :
Vérification de la résistance à l’arrachement des détonateurs
Ta slovenski standard je istoveten z: EN 13763-7:2025
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13763-7
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2025
EUROPÄISCHE NORM
ICS 71.100.30 Supersedes EN 13763-7:2003
English Version
Explosives for civil uses - Detonators and detonating cord
relays - Part 7: Verification of pull-out resistance of
detonators
Explosifs à usage civil - Détonateurs et relais pour Explosivstoffe für zivile Zwecke - Zünder und
cordeau détonant - Partie 7 : Vérification de la Sprengschnurverzögerer - Teil 7: Überprüfung des
résistance à l'arrachement des détonateurs Auszugswiderstands von Zündern
This European Standard was approved by CEN on 29 September 2025.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13763-7:2025 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
)
6 Preparation of test sample . 7
6.1 Electric detonators and electronic detonators with leading wires . 7
6.2 Non-electric detonators and electronic detonators with shock tube . 7
7 Procedure . 7
7.1 General. 7
7.2 Electric detonators and electronic detonators with leading wires . 7
7.2.1 Sudden release test . 7
7.2.2 Slow-release test . 7
7.3 Non-electric detonators and electronic detonators with shock tube – Sudden release test 8
8 Expression of results . 8
9 Test report . 8
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/28/EU relating to the making available on the market and
supervision of explosives for civil uses aimed to be covered . 9
Bibliography . 10
European foreword
This document (EN 13763-7:2025) has been prepared by Technical Committee CEN/TC 321 “Explosives
for civil uses”, the secretariat of which is held by UNE.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2026, and conflicting national standards shall be
withdrawn at the latest by April 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13763-7:2003.
a) the document title has been changed from “Detonators and relays — Part 7: Determination of the
mechanical strength of leading wires, shock tubes, connections, crimps and closures” to “Detonators
and detonating cord relays — Part 7: Verification of pull-out resistance of detonators”;
b) the Introduction has been removed;
c) the Scope has been revised to clarify the covered and not covered explosives;
d) the normative references have been updated;
e) the Clause 4 “Principle” has been added;
f) the Clause “Apparatus” has been completed;
g) the Clause “Test pieces” is now called “Preparation of test sample”;
h) the Clause “Procedure” has been revised and now also includes specifications for electronic
detonators;
i) the Clause 8 “Expression of results” has been added;
j) the Clause “Test report” does no longer require conformity with EN ISO/IEC 17025 and the
information to be provided has been revised in accordance with the revised test procedure;
k) the former Annex A “Range of applicability of the test method” has been removed;
l) the Annex ZA has been updated;
m) the Bibliography has been added and lists EN ISO/IEC 17025:2017.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
A list of all parts in the EN 13763 series, published under the general title Explosives for civil uses —
Detonators and detonating cord relays, can be found on the CEN website.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
1 Scope
This document specifies test methods for the verification of the pull-out resistance of detonators.
This document applies to electric detonators, electronic detonators and non-electric detonators equipped
with leading wires or shock tube.
This document does not apply to plain detonators or semi-finished detonators.
This document does not apply to surface connectors, detonating cord relays, coupling accessories,
electronic initiation systems.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 13763-1:2025, Explosives for civil uses — Detonators and detonating cord relays — Part 1:
Requirements
EN 13857-1:2025, Explosives for civil uses — Part 1: Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 13857-1:2025 apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at http
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.