prEN 13630-6

Explosives for civil uses - Detonating cords and safety fuses - Part 6: Determination of resistance to tension of detonating cords

This document specifies a method to determine the resistance to mechanical tension of detonating cords and safety fuses.
Applicability of the test method is ambient laboratory conditions.

Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 6: Bestimmung der Zugfestigkeit von Sprengschnüren

Dieses Dokument legt ein Verfahren für die Bestimmung der Widerstandsfähigkeit von Sprengschnüren und Sicherheitsanzündschnüren gegenüber mechanischer Zugbelastung fest.
Die Anwendbarkeit des Prüfverfahrens ist unter Umgebungsbedingungen im Labor gegeben.

Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 6 : Détermination de la résistance à la tension des cordeaux détonants

Le présent document spécifie une méthode de détermination de la résistance à la tension mécanique des cordeaux détonants et des mèches de sûreté.
La méthode d'essai est applicable en conditions ambiantes de laboratoire.

Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 6. del: Ugotavljanje natezne trdnosti detonacijskih vrvic

General Information

• Status: Not Published
• Publication Date: 29-May-2023
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 6 - Explosives and propellants
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 07-Sep-2023
• Due Date: 23-Jul-2021
• Completion Date: 07-Sep-2023
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Mandate: M/562 - Standardization Request on Explosives for civil use
• Ref Project: oSIST prEN 13630-6:2021 - Explosives for civil uses - Detonating cords and safety fuses - Part 6: Determination of resistance to tension of detonating cords

Relations

• Revises: EN 13630-6:2002 - Explosives for civil uses - Detonating cords and safety fuses - Part 6: Determination of resistance to tension of detonating cords
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13630-6:2021
01-april-2021
Eksplozivi za civilno uporabo – Detonacijske in počasi goreče vžigalne vrvice – 6.
del: Ugotavljanje natezne trdnosti detonacijskih vrvic
Explosives for civil uses - Detonating cords and safety fuses - Part 6: Determination of
resistance to tension of detonating cords
Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicheheitsanzündschnüre - Teil 6:
Bestimmung der Zugfestigkeit von Sprengschnüren
Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partis 6:
Détermination de la résistance à la tension des cordeaux détonants
Ta slovenski standard je istoveten z: prEN 13630-6
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13630-6:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13630-6:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13630-6:2021


DRAFT
EUROPEAN STANDARD
prEN 13630-6
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13630-6:2002
English Version

Explosives for civil uses - Detonating cords and safety
fuses - Part 6: Determination of resistance to tension of
detonating cords
Explosifs à usage civil - Cordeaux détonants et mèches Explosivstoffe für zivile Zwecke - Sprengschnüre und
de sûreté - Partis 6: Détermination de la résistance à la Sicheheitsanzündschnüre - Teil 6: Bestimmung der
tension des cordeaux détonants Zugfestigkeit von Sprengschnüren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13630-6:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13630-6:2021
prEN 13630-6:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Preparation of test samples . 6
7 Procedure . 6
8 Test report . 6
Annex ZA (informative) Relation
...