iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 13116

(Main)

Curtain walling - Resistance to wind load - Performance requirements

Curtain walling - Resistance to wind load - Performance requirements

This document specifies the structural performance requirements of curtain walling under wind load, both its fixed and openable parts, under positive and negative static air pressure.
This document applies to any curtain walling product as defined in EN 13830.

Vorhangfassaden - Widerstand gegen Windlast - Leistungsanforderungen

Dieses Dokument legt die Bauleistungsanforderungen an sowohl ortsfeste als auch zu öffnende Teile von Vorhangfassaden unter Windlast bei positivem und negativem statischem Luftdruck fest.
Dieses Dokument gilt für alle in EN 13830 festgelegten Produkte von Vorhangfassaden.

Façades rideaux - Résistance structurelle au vent - Prescriptions de performance

Ce document définit les prescriptions de performance structurelle des façades rideaux sous la charge du vent, pour les parties fixes et ouvrantes, sous une pression d'air statique positive et négative.
Ce document s'applique à tous les produits de façades rideaux suivant la définition donnée dans l'EN 13830.

Obešene fasade - Odpornost proti obremenitvi z vetrom - Zahtevane lastnosti

General Information

Status
Not Published
Publication Date
03-Nov-2024
ICS
91.060.10 - Walls. Partitions. Facades
Technical Committee
CEN/TC 33 - Doors, windows, shutters and building hardware
Drafting Committee
CEN/TC 33/WG 6 - Curtain walling
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
10-Aug-2023
Due Date
02-Nov-2023
Completion Date
10-Aug-2023
Ref Project
oSIST prEN 13116:2022 - Curtain walling - Resistance to wind load - Performance requirements

Relations

Revises
EN 13116:2001 - Curtain walling - Resistance to wind load - Performance requirements
Effective Date
26-Jan-2022

Buy Standard

prEN 13116:2022prEN 13116:2022
PreviousNext
Draft
prEN 13116:2022
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13116:2022
01-december-2022
Obešene fasade - Odpornost proti obremenitvi z vetrom - Zahtevane lastnosti
Curtain walling - Resistance to wind load - Performance requirements
Vorhangfassaden - Widerstand gegen Windlast - Leistungsanforderungen
Façade rideaux - Résistance structurelle au vent - Prescriptions de performance
Ta slovenski standard je istoveten z: prEN 13116
ICS:
91.060.10 Stene. Predelne stene. Walls. Partitions. Facades
Fasade
oSIST prEN 13116:2022 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13116:2022
---------------------- Page: 2 ----------------------
oSIST prEN 13116:2022
DRAFT
EUROPEAN STANDARD
prEN 13116
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2022
ICS 91.060.10 Will supersede EN 13116:2001
English Version
Curtain walling - Resistance to wind load - Performance
requirements

Façade rideaux - Résistance structurelle au vent - Vorhangfassaden - Widerstand gegen Windlast -

Prescriptions de performance Leistungsanforderungen

This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee

CEN/TC 33.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations

which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC

Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and

United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are

aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without

notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13116:2022 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13116:2022
prEN 13116:2022 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .................................................................................................................................... 4

3 Terms and definitions ................................................................................................................................... 4

4 Requirements ................................................................................................................................................... 5

4.1 Generalities ....................................................................................................................................................... 5

4.2 Performance under design load ................................................................................................................ 5

4.3 Performance under increased load .......................................................................................................... 5

5 Test methods .................................................................................................................................................... 6

6 Classification ..................................................................................................................................................... 6

Bibliography .................................................................................................................................................................... 7

---------------------- Page: 4 ----------------------
oSIST prEN 13116:2022
prEN 13116:2022 (E)
European foreword

This document (prEN 13116:2022) has been prepared by Technical Committee CEN/TC 33 “Doors,

windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.

This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13116:2001.

This document forms part of a series of European Standards dedicated to curtain walling products as

defined in the curtain walling product standard EN 13830.

This document complements a series of curtain walling standards for performance requir

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12152:2023(Main)
Curtain walling - Air permeability - Performance requirements and classification
SIST EN 12152:2023

This document specifies requirements and classification of air permeability of both fixed and openable parts of curtain walling, under positive and negative static air pressure.
This document applies to curtain walling as specified in EN 13830.
NOTE   This version of EN 12152:2023 will supersede EN 12152:2002. Existing test results according to EN 12152:2002 could be considered still valid compared with this version of EN 12152.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12153:2023(Main)
Curtain walling - Air permeability - Test method
SIST EN 12153:2023

This document defines the method to be used to determine the air permeability of curtain walling, both its fixed and openable parts. It describes how the specimen shall be tested under positive and negative air pressure.
This document applies to any curtain walling product as defined in EN 13830.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14024:2023(Main)
Metal profiles with thermal barrier - Mechanical performance - Requirements, proof and tests for assessment
SIST EN 14024:2023

This document specifies requirements for assessment of the mechanical strength of metal profiles incorporating a thermal barrier having mechanical performance depending on their intended use.
It also specifies the tests to determine the characteristic values of mechanical properties of the thermal barrier profile and to assess the effect of different conditionings of the thermal barrier on the mechanical performance of the connection.
This document does not apply to thermal barriers which do not give a contribution to the mechanical resistance of the profiles.
This document is applicable to thermal barrier profiles designed mainly for windows, doors, screens and curtain walls.
This document does not apply to thermal barriers made only of metal profiles connected with metal pins or screws.
This current edition of EN 14024 will supersede EN 14024:2004. Differences in test procedures between the two versions will not lead to significant differences in test results. Therefore, existing test results according to EN 14024:2004 are considered as equivalent to new test results according to the current edition of EN 14024.

  • Draft
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13830:2015+A1:2020/AC:2022(Corrigendum)
Curtain walling - Product standard
SIST EN 13830:2015+A1:2020/AC:2022

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16758:2021(Main)
Curtain walling - Determination of the strength of shear connections - Test method and requirements
SIST EN 16758:2021

This document specifies test methods for the determination of bearing capacity (ultimate limit state and serviceability limit state), of connections between curtain walling framing members which cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials.
Mechanical performances of the curtain walling connections are already assessed in accordance with the provisions described in EN 13830. Additional information with respect to mechanical performance of the connections and direct applications can be determined with this document (see Annex C).

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13830:2015+A1:2020(Main + Amendment)
Curtain walling - Product standard
SIST EN 13830:2015+A1:2020

This European Standard specifies requirements of curtain walling kit intended to be used as a building envelope to provide weather resistance, safety in use and energy economy and heat retention and provides test/assessments/calculation methods and compliance criteria of the related performances.
The curtain walling kit covered by this standard should fulfil its own integrity and mechanical stability but does not contribute to the load bearing or stability of the main building structure, and could be replaced independently of it.
This standard applies to curtain walling kit ranging from a vertical position to ± 15° from the vertical. Any sloping parts should be contained within the curtain walling kit.
This standard is applicable to the whole of the curtain walling kits, including the fixings.
Curtain walling according to this standard is intended to be used as part of the building envelope.
This European Standard does not include:
—   “Patent glazing” (glazed sloping roofs) kits;
—   Roof glazing constructions;
—   Façades made of precast concrete panels as part of the wall (see EN 14992).
NOTE 1   Precast concrete panels may be used in curtain walling kits as infill panels.
NOTE 2   Durability of structural sealed glazing infills is not covered by this standard.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17146:2018(Main)
Determination of the strength of infill supports - Test method and requirements
SIST EN 17146:2019

This document specifies test methods for the determination of the bearing capacity (ultimate limit state and serviceability limit state) of infill support which cannot be calculated in accordance with current codes or conventional calculations based upon the strength of the materials or to compare the calculation when necessary.
Three different types of infill (glass) supports are dealt in this standard:
- The cantilever infill (glass) supports, see Figure 1 (a);
- The cruciform infill (glass) supports only fixed to the mullion, see Figure 1 (b);
- Corner infill (glass) supports only fixed to the mullion, see Figure 1 (c).
The test method is intended for the assessment of cantilever infill (glass) supports that have not been tested according to EN 16758 (see Figure 9). The results of the test method can only be interpreted when incorporated with the results from a test in accordance with EN 16758.
It is essential that cruciform and corner infill (glass) supports only fixed to the mullion are tested in accordance with this standard.
The infill (glass) supports connected to the mullion and the transom together are considered as a part of sheared connection and are covered by EN 16758.
Where the mechanical performances of the infill (glass) support is already assessed in accordance with the provisions described in EN 13830, additional information with respect to mechanical performance of the infill (glass) support and direct applications can be determined with this standard.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13119:2016(Main)
Curtain walling - Terminology
SIST EN 13119:2016

This European Standard de¬scribes terminology used in documents, drawings, specifications etc., when referring to the detailed elements of curtain wall¬ing and provides a comprehensive, though not total, list of regu¬lar terms.
It does not set out to repeat those physical definitions properly included within individual curtain walling standards related to performance requirements and associated test methods.

  • Standard
    25 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14019:2016(Main)
Curtain Walling - Impact resistance - Performance requirements
SIST EN 14019:2016

This European Standard defines performance requirements of curtain walling (excluding ‘glass in building’ which is classified under EN 12600) under soft body impact load criteria specified herein and tested in accordance with EN 13049.
Its criteria is targeted to safety in use and integrity of curtain wall in the event of sudden impact forces on the curtain wall surfaces. Compliance with the performance requirement is determined by the laboratory test.
It applies to those areas of curtain walling which face onto areas of human activity, either internally or externally and takes account of accidental impacts brought on by people going about their normal daily activities and impacts brought about by equipment and similar devices for maintenance, cleaning, repair and similar occasional activities.
It does not set out to define performance requirements of impact under exceptional circumstances such as acts of vandalism, vehicular collision, firearm projectiles, etc..
This standard will have no bearing whatsoever on any National Building / Health and Safety regulations which may exist and whose requirements shall apply separately and in parallel with these test performance requirements.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13050:2011(Main)
Curtain Walling - Watertightness - Laboratory test under dynamic condition of air pressure and water spray
SIST EN 13050:2011

This European Standard defines an additional test method which may be used when assessing the watertightness of curtain walling, both its fixed and openable parts. It is a supplementary test, not required for classification purposes, and it should be used only when the project specifier has determined its necessity.
This European Standard describes how the outside face of a curtain walling specimen should be subjected to a continuous spray of water and a turbulent airflow, with continuous pulses of positive air pressure on the outside of the test specimen generated from within the chamber.
This European Standard applies to any curtain walling product as defined in EN 13830.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day