prEN 13631-3
(Main)Explosives for civil uses - Explosives - Part 3: Determination of sensitiveness to friction of explosives
Explosives for civil uses - Explosives - Part 3: Determination of sensitiveness to friction of explosives
This document specifies a method for determining the sensitiveness to friction of explosives. This method is not applicable to liquid products.
Explosivstoffe für zivile Zwecke - Explosivstoffe - Teil 3: Bestimmung der Reibempfindlichkeit von Explosivstoffen
Explosifs à usage civil - Explosifs - Partie 3 : Détermination de la sensibilité au frottement des explosifs
Eksplozivi za civilno uporabo – Razstreliva – 3. del: Ugotavljanje občutljivosti razstreliv na trenje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 13631-3:2021
01-april-2021
Eksplozivi za civilno uporabo – Razstreliva – 3. del: Ugotavljanje občutljivosti
razstreliv na trenje
Explosives for civil uses - High explosives - Part 3: Determination of sensitiveness to
friction of explosives
Explosivstoffe für zivile Zwecke - Sprengstoffe - Teil 3: Bestimmung der
Reibempfindlichkeit von Explosivstoffen
Explosifs à usage civil - Explosifs - Partie 3 : Détermination de la sensibilité au frottement
des explosifs
Ta slovenski standard je istoveten z: prEN 13631-3
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13631-3:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 13631-3:2021
---------------------- Page: 2 ----------------------
oSIST prEN 13631-3:2021
DRAFT
EUROPEAN STANDARD
prEN 13631-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2021
ICS 71.100.30 Will supersede EN 13631-3:2004
English Version
Explosives for civil uses - Explosives - Part 3:
Determination of sensitiveness to friction of explosives
Explosifs à usage civil - Explosifs - Partie 3 : Explosivstoffe für zivile Zwecke - Explosivstoffe - Teil
Détermination de la sensibilité au frottement des 3: Bestimmung der Reibempfindlichkeit von
explosifs Explosivstoffen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13631-3:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 13631-3:2021
prEN 13631-3:2021 (E)
Contents
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Preparation of test samples . 4
5.1 Solid substances which are easily broken up or in powdered form . 4
5.2 Plastic-bonded substances and other solids which are not easily broken up . 4
5.3 Paste-like and gel-type substances . 4
6 Apparatus . 5
7 Procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.