EN 14617-15:2005
(Main)Agglomerated stone - Test methods - Part 15: Determination of compressive strength
Agglomerated stone - Test methods - Part 15: Determination of compressive strength
This document specifies a method for determining the compressive strength of agglomerated stones.
Künstlich hergestellter Stein - Prüfverfahren - Teil 15: Bestimmung der Druckfestigkeit
Dieses Dokument legt ein Verfahren zur Bestimmung der Druckfestigkeit von künstlich hergestellten Steinen
fest.
Pierre agglomérée - Méthodes d'essai - Partie 15: Détermination de la résistance en compression
Le présent document spécifie une méthode de détermination de la résistance en compression des pierres agglomérées.
Aglomeriran kamen - Preskusne metode - 15. del: Ugotavljanje tlačne trdnosti
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2005
$JORPHULUDQNDPHQ3UHVNXVQHPHWRGHGHO 8JRWDYOMDQMHWODþQHWUGQRVWL
Agglomerated stone - Test methods - Part 15: Determination of compressive strength
Künstlich hergestellter Stein - Prüfverfahren - Teil 15: Bestimmung der Druckfestigkeit
Pierre agglomérée - Méthodes d'essai - Partie 15: Détermination de la résistance en
compression
Ta slovenski standard je istoveten z: EN 14617-15:2005
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 14617-15
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2005
ICS 91.100.15
English version
Agglomerated stone - Test methods - Part 15: Determination of
compressive strength
Pierre agglomérée - Méthodes d'essai - Partie 15: Künstlich hergestellter Stein - Prüfverfahren - Teil 15:
Détermination de la résistance à la compression Bestimmung der Druckfestigkeit
This European Standard was approved by CEN on 3 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14617-15:2005: E
worldwide for CEN national Members.
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Terms and definitions .4
5 Symbols .4
6 Apparatus .4
7 Preparation of specimens.5
8 Procedure .6
9 Expression of results .6
10 Test report .6
Annex A (normative) Statistical evaluation of test results.8
Bibliography .11
Foreword
This document (EN 14617-15:2005) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2005, and conflicting national standards shall be withdrawn at the
latest by September 2005.
Test methods for agglomerated stones consist of the following:
EN 14617-1, Agglomerated stone - Test methods – Part 1: Determination of apparent density and water absorption
EN 14617-2, Agglomerated stone – Test methods – Part 2: Determination of flexural strength (bending)
prEN 14617-3, Agglomerated stone - Test methods – Part 3: Determination of slipperiness
EN 14617-4, Agglomerated stone - Test methods – Part 4: Determination of the abrasion resistance
EN 14617-5, Agglomerated stone - Test methods – Part 5: Determination of freeze and thaw resistance
EN 14617-6, Agglomerated stone - Test methods – Part 6: Determination of thermal shock
prEN 14617-7, Agglomerated stone – Test methods – Part 7: Determination of ageing
prEN 14617-8, Agglomerated stone – Test methods – Part 8: Determination of resistance to fixing (dowel hole)
EN 14617-9, Agglomerated stone - Test methods – Part 9: Determination of impact resistance
EN 14617-10, Agglomerated stone – Test methods – Part 10: Determination of chemical resistance
EN 14617-11, Agglomerated stone – Test methods – Part 11: Determination of linear thermal expansion coefficient
EN 14617-12, Agglomerated stone – Test methods – Part 12: Determination of dimensional stability
EN 14617-13, Agglomerated stone – Test methods – Part 13: Determination of electrical resistivity
EN 14617-15, Agglomerated stone – Test methods – Part 15: Determination of compressive strength
EN 14617-16, Agglomerated stone – Test methods – Part 16: Determination of dimensions, geometric characteristics
and surface quality of modular tiles
prEN 14617-17, Agglomerated stone – Test methods – Part 17: Determination of biological resistance
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1 Scope
This document specifies a method for determining the compressive strength of agglomerated stones.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.
EN 197-1, Cement - Part 1: Composition, specifications and conformity criteria for common cements
EN 12390, Testing hardened concrete
EN 14618:2003, Agglomerated stone- Terminology and classification
3 Principle
The specimens, after mechanical preparation of the surfaces or, if needed, after capping, are laid and centred on
the plate of a testing machine. A uniformly distributed load is applied and increased continuously until failure occurs.
4 Terms and definitions
For the purposes of this standard, the terms and definitions given in EN 14618:2003 apply.
5 Symbols
h height of the specimen, in millimetres;
l mean value of the lateral dimension, i.e. the distance between opposite vertical faces of the specimen (if
cubic), in millimetres;
d mean value of the diameter of the specimen (if cylindrical), in millimetres;
A cross-sectional area of the specimen before testing, in square millimetres;
F failure load, in newtons;
R uniaxial compressive strength of the specimen, in MPa;
R mean value of the uniaxial compressive strength, in MPa;
s
standard deviation;
v coefficient of variation.
6 Apparatus
6.1 A surface grinder.
6.2 A lapping machine if final preparation of the specimens is needed.
---------------------- Pa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.