EN ISO 105-C06:2010
(Main)Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010)
Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010)
ISO 105-C06:2010 specifies methods intended for determining the resistance of the colour of textiles of all kinds and in all forms to domestic or commercial laundering procedures used for normal household articles using a reference detergent. Industrial and hospital articles may be subjected to special laundering procedures which may be more severe in some aspects.
The colour loss and staining resulting from desorption and/or abrasive action in one single (S) test closely approximates to one commercial or domestic laundering. The results of one multiple (M) test may in some cases be approximated by the results of up to five domestic or commercial launderings at temperatures not exceeding 70 °C. The M tests are more severe than the S tests because of an increase in mechanical action.
These methods do not reflect the effect of optical brighteners present in commercial washing products.
These methods are designed for the detergents and bleach systems given. Other detergents and bleach systems may require different conditions and levels of ingredients.
Textilien - Farbechtheitsprüfungen - Teil C06: Farbechtheit bei der Haushaltswäsche und der gewerblichen Wäsche (ISO 105-C06:2010)
Dieser Teil von ISO 105 legt Prüfverfahren zur Bestimmung der Widerstandsfähigkeit der Farbe von Textilien
jeder Art und in allen Verarbeitungszuständen gegen Haushaltswäschen oder gewerbliche Waschprozesse,
wie sie für normale, im Haushalt gebräuchliche Textilien angewendet werden, fest. Arbeitsbekleidung und
Krankenhauswäsche werden üblicherweise besonderen Waschverfahren unterworfen, die in verschiedener
Hinsicht eine schwerere Beanspruchung darstellen können.
Der Farbverlust und das Anbluten, die von der Desorption und/oder dem Abrieb bei einer Einfachprüfung (S)
herrühren, entsprechen annähernd dem Effekt einer Haushalts- oder gewerblichen Wäsche. Die Ergebnisse
einer Mehrfachprüfung (M) können in einigen Fällen dem Resultat von bis zu fünf Haushalts- oder
gewerblichen Wäschen entsprechen, wenn die Temperatur 70 °C nicht übersteigt. Die „M“-Prüfverfahren sind
wegen der stärkeren mechanischen Beanspruchung strenger als die „S“-Prüfverfahren.
Diese Prüfverfahren spiegeln nicht den Einfluss von optischen Aufhellern wider, die in handelsüblichen
Waschmitteln vorhanden sind.
Diese Verfahren sind für die angegebenen Wasch- und Bleichmittelsysteme entwickelt worden. Andere
Wasch- und Bleichmittelsysteme können verschiedene Bedingungen und Gehalte der Inhaltsstoffe erfordern.
Textiles - Essais de solidité des coloris - Partie C06: Solidité des coloris aux lavages domestiques et industriels (ISO 105-C06:2010)
L'ISO 105-C06:2010 spécifie des méthodes pour la détermination de la solidité des coloris sur les textiles de toutes natures et sous toutes formes, aux procédés de lavages domestiques et industriels employés pour les articles à usages domestiques, qui utilisent un détergent de référence. Les articles à usages hospitaliers ou industriels peuvent être soumis à des procédés de lavage spéciaux qui peuvent être plus sévères sur certains points.
La dégradation et le dégorgement résultant de la désorption et/ou de l'action abrasive au cours d'un essai type (S) se rapprochent étroitement de ceux obtenus après un lavage industriel ou domestique. Les résultats d'un essai répété (M) peuvent dans certains cas se rapprocher des résultats obtenus après cinq lavages domestiques ou industriels à des températures ne dépassant pas 70 °C. Les essais du type «M» sont plus sévères que ceux du type «S» en raison d'un accroissement de l'action mécanique.
Ces méthodes ne reproduisent pas l'effet des azurants optiques présents dans les produits de lavage commerciaux.
Ces méthodes sont conçues pour les systèmes de détergent et blanchiment donnés. D'autres systèmes de détergent et blanchiment peuvent nécessiter des conditions et des niveaux d'ingrédients différents.
Tekstilije - Preskušanje barvne obstojnosti - Del C06: Barvna obstojnost proti gospodinjskemu in poklicnemu pranju (ISO 105-C06:2010)
Ta del standarda ISO 105 določa metode, namenjene za določevanje odpornosti barve vseh vrst in oblik tekstilij proti gospodinjskim in poklicnim postopkom pranja, ki se uporabljajo za običajne gospodinjske izdelke, z referenčnim detergentom. Za izdelke, ki se uporabljajo v industriji in bolnišnicah, bo morda treba uporabiti posebne postopke pranja, ki so z nekaterih vidikov ostrejši. Izguba barve in madeži zaradi desorpcije in/ali abrazivnega delovanja pri enem samem (S) preskusu, so tesen
približek enemu poklicnemu ali gospodinjskemu pranju. Rezultati enega večkratnega (M) preskusa so lahko v nekaterih primerih približki rezultatov največ petih gospodinjskih ali poklicnih pranj pri temperaturah, nižjih od 70 °C. Večkratni preskusi so zaradi večjega mehanskega delovanja ostrejši od enkratnih. Te metode ne odražajo učinka optičnih belil, ki so prisotna v poklicnih pralnih sredstvih. Te metode so namenjene za navedene detergente in postopke beljenja. Za druge detergente ali postopke beljenja bi bili morda potrebni drugačni pogoji in količine sestavin.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN ISO 105-C06:1999
SIST EN ISO 105-C06:1999/AC:2009
Tekstilije - Preskušanje barvne obstojnosti - Del C06: Barvna obstojnost proti
gospodinjskemu in poklicnemu pranju (ISO 105-C06:2010)
Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and
commercial laundering (ISO 105-C06:2010)
Textilien - Farbechtheitsprüfungen - Teil C06: Farbechtheit bei der Haushaltswäsche und
der gewerblichen Wäsche (ISO 105-C06:2010)
Textiles - Essais de solidité des teintures - Partie C06: Solidité des teintures aux lavages
domestiques et industriels (ISO 105-C06:2010)
Ta slovenski standard je istoveten z: EN ISO 105-C06:2010
ICS:
59.080.01 Tekstilije na splošno Textiles in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 105-C06
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2010
ICS 59.080.01 Supersedes EN ISO 105-C06:1997
English Version
Textiles - Tests for colour fastness - Part C06: Colour fastness
to domestic and commercial laundering (ISO 105-C06:2010)
Textiles - Essais de solidité des coloris - Partie C06: Textilien - Farbechtheitsprüfungen - Teil C06: Farbechtheit
Solidité des coloris aux lavages domestiques et industriels bei der Haushaltswäsche und der gewerblichen Wäsche
(ISO 105-C06:2010) (ISO 105-C06:2010)
This European Standard was approved by CEN on 18 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 105-C06:2010: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 105-C06:2010) has been prepared by Technical Committee ISO/TC 38 "Textiles" in
collaboration with Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is
held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2010, and conflicting national standards shall be
withdrawn at the latest by September 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 105-C06:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 105-C06:2010 has been approved by CEN as a EN ISO 105-C06:2010 without any
modification.
INTERNATIONAL ISO
STANDARD 105-C06
Fourth edition
2010-03-15
Textiles — Tests for colour fastness —
Part C06:
Colour fastness to domestic and
commercial laundering
Textiles — Essais de solidité des coloris —
Partie C06: Solidité des coloris aux lavages domestiques et industriels
Reference number
ISO 105-C06:2010(E)
©
ISO 2010
ISO 105-C06:2010(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2010
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2010 – All rights reserved
ISO 105-C06:2010(E)
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Principle.2
4 Apparatus, materials and reagents .2
5 Test specimen.6
6 Test procedures.6
7 Test report.8
Bibliography.9
ISO 105-C06:2010(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take Part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 105-C06 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC 1, Tests for
coloured textiles and colorants.
This fourth edition cancels and replaces the third edition (ISO 105-C06:1994). It also incorporates
ISO 105-C06:1994/Cor. 1:2002 and ISO 105-C06:1994/Cor. 2:2002. Clause 4 has been technically revised to
include the use of instrumental measurement and correction to AATCC detergent formula and dated
references have been removed from Clause 2.
ISO 105 consists of many parts designated by a part letter and a two-digit serial number (e.g. A01), under the
general title Textiles — Test for colour fastness. A complete list of these parts is given in ISO 105-A01.
iv © ISO 2010 – All rights reserved
INTERNATIONAL STANDARD ISO 105-C06:2010(E)
Textiles — Tests for colour fastness —
Part C06:
Colour fastness to domestic and commercial laundering
1 Scope
This part of ISO 105 specifies methods intended for determining the resistance of the colour of textiles of all
kinds and in all forms to domestic or commercial laundering procedures used for normal household articles
using a reference detergent. Industrial and hospital articles may be subjected to special laundering
procedures which may be more severe in some aspects.
The colour loss and staining resulting from desorption and/or abrasive action in one single (S) test closely
approximates to one commercial or domestic laundering. The results of one multiple (M) test may in some
cases be approximated by the results of up to five domestic or commercial launderings at temperatures not
exceeding 70 °C. The M tests are more severe than the S tests because of an increase in mechanical action.
These methods do not reflect the effect of optical brighteners present in commercial washing products.
These methods are designed for the detergents and bleach systems given. Other detergents and bleach
systems may require different conditions and levels of ingredients.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 105-A01, Textiles — Tests for colour fastness — Part A01: General principles of testing
ISO 105-A02, Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour
ISO 105-A03, Textiles — Tests for colour fastness — Part A03: Grey scale for assessing staining
ISO 105-A04, Textiles — Tests for colour fastness — Part A04: Method for the instrumental assessment of
the degree of staining of adjacent fabrics
ISO 105-A05, Textiles — Tests for colour fastness — Part A05: Instrumental assessment of change in colour
for determination of grey scale rating
ISO 105-F01, Textiles — Tests for colour fastness — Part F01: Specification for wool adjacent fabric
ISO 105-F02, Textiles — Tests for colour fastness — Part F02: Specification for cotton and viscose adjacent
fabrics
ISO 105-F03, Textiles — Tests for colour fastness — Part F03: Specification for polyamide adjacent fabric
ISO 105-F04, Textiles — Tests for colour fastness — Part F04: Specification for polyester adjacent fabric
ISO 105-C06:2010(E)
ISO 105-F05, Textiles — Tests for colour fastness — Part F05: Specification for acrylic adjacent fabric
ISO 105-F06, Textiles — Tests for colour fastness — Part F06: Specification for silk adjacent fabric
ISO 105-F07, Textiles — Tests for colour fastness — Part F07: Specification for secondary acetate adjacent
fabric
ISO 105-F10, Textiles — Tests for colour fastness — Part F10: Specification for adjacent fabric: Multifibre
ISO 3696, Water for analytical laboratory use — Specification and test methods
3 Principle
A specimen of the textile in contact with specified adjacent fabric or fabrics is laundered, rinsed and dried.
Specimens are laundered under appropriate conditions of temperature, alkalinity, bleaching and abrasive
action such that the result is obtained in a conveniently short time. The abrasive action is accomplished by the
use of a low liquor ratio and an appropriate number of steel balls. The change in colour of the specimen and
the staining of the adjacent fabric or fabrics are assessed by comparison with the grey scales or instrumentally.
4 Apparatus, materials and reagents
4.1 Suitable mechanical device, consisting of a water bath containing a rotatable shaft which supports,
radially, stainless steel containers with a diameter of (75 ± 5) mm and a height of (125 ± 10) mm, of capacity
(550 ± 50) ml, the bottom of the containers being (45 ± 10) mm from the centre of the shaft.
−1
The shaft/container assembly is rotated at a frequency of (40 ± 2) min . The temperature of the water bath is
thermostatically controlled to maintain the test solution at the prescri
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.