iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN 14983

(Main)

Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage

Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage

This standard specifies the requirements for equipment for firedamp drainage. That equipment can consist of ventilators, pressure generators and safety facilities. This standard also specifies requirements for the installation and monitoring of this equipment.

Explosionsschutz in untertägigen Bergwerken - Geräte und Schutzsysteme zur Absaugung von Grubengas

Prévention de l’explosion et protection contre l’explosion dans les mines souterraines - Appareils et systèmes de protection destinés au captage du grisou

Preprečevanje eksplozij in zaščita v podzemnih rudnikih - Oprema in zaščitni sistemi za odvajanje jamskega plina

General Information

Status
Not Published
Publication Date
05-Aug-2024
ICS
73.100.20 - Ventilation, air-conditioning and illumination equipment
Technical Committee
CEN/TC 305 - Potentially explosive atmospheres - Explosion prevention and protection
Drafting Committee
CEN/TC 305/WG 5 - Equipment and protection systems for mining
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
10-Nov-2023
Due Date
06-Feb-2023
Completion Date
10-Nov-2023
Directive
2014/34/EU - Directive 2014/34/EU Of The European Parliament And Of The Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres (recast)
Mandate
M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
Ref Project
oSIST prEN 14983:2021 - Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage

Relations

Revises
EN 14983:2007 - Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
Effective Date
26-Dec-2018

Buy Standard

prEN 14983:2021prEN 14983:2021
PreviousNext
Draft
prEN 14983:2021
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 14983:2021
01-november-2021
Preprečevanje eksplozij in zaščita v podzemnih rudnikih - Oprema in zaščitni
sistemi za odvajanje jamskega plina
Explosion prevention and protection in underground mines - Equipment and protective
systems for firedamp drainage
Explosionsschutz in untertägigen Bergwerken - Geräte und Schutzsysteme zur
Absaugung von Grubengas
Prévention de l’explosion et protection contre l’explosion dans les mines souterraines -
Appareils et systèmes de protection destinés au captage du grisou
Ta slovenski standard je istoveten z: prEN 14983
ICS:
13.230 Varstvo pred eksplozijo Explosion protection
73.100.20 Prezračevalna, Ventilation, air-conditioning
klimatizacijska in and illumination equipment
razsvetljevalna oprema
oSIST prEN 14983:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 14983:2021

---------------------- Page: 2 ----------------------
oSIST prEN 14983:2021


DRAFT
EUROPEAN STANDARD
prEN 14983
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2021
ICS 73.100.20 Will supersede EN 14983:2007
English Version

Explosion prevention and protection in underground
mines - Equipment and protective systems for firedamp
drainage
Prévention de l'explosion et protection contre Explosionsschutz in untertägigen Bergwerken - Geräte
l'explosion dans les mines souterraines - Appareils et und Schutzsysteme zur Absaugung von Grubengas
systèmes de protection destinés au captage du grisou
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 305.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14983:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 14983:2021
prEN 14983:2021 (E)
Contents Page

European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Equipment and protective systems for firedamp drainage . 9
4.1 General . 9
4.2 Borehole standpipes . 9
4.3 Drainage pipes for seals and stoppings .12
4.4 Water separators at drainage points .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14983:2007(Main)
Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
SIST EN 14983:2007

This standard specifies the requirements for equipment for firedamp drainage. That equipment can consist of ventilators, pressure generators and safety facilities. This standard also specifies requirements for the installation and monitoring of this equipment.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-1:2004/AC:2006(Corrigendum)
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure
SIST EN 14591-1:2005/AC:2006

EC - Annex ZA in line with latest requirements

  • Corrigendum
    4 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-1:2004(Main)
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure
SIST EN 14591-1:2005

This document applies to air shutter frames and air doors for ventilation structures which are to remain functional after the passage of explosions with overpressures of up to 2 bar.
Ventilation structures are protective systems to provide the ventilation flow after the occurrence of an explosion such that the effects of an explosion on the ventilation system can be limited and adequate possibilities remain for escape and rescue.
NOTE   These structures may be used when ventilation studies indicate that the air flow in the work place would be reduced considerably providing no safe escape for workers in cases where the structure is destroyed. Explosion proof ventilation structures will be individually evaluated for directional stability of ventilation flows and in order to ensure adequate ventilation flows.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14983:2007(Main)
Explosion prevention and protection in underground mines - Equipment and protective systems for firedamp drainage
SIST EN 14983:2007

This standard specifies the requirements for equipment for firedamp drainage. That equipment can consist of ventilators, pressure generators and safety facilities. This standard also specifies requirements for the installation and monitoring of this equipment.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-1:2004/AC:2006(Corrigendum)
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure
SIST EN 14591-1:2005/AC:2006

EC - Annex ZA in line with latest requirements

  • Corrigendum
    4 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14591-1:2004(Main)
Explosion prevention and protection in underground mines - Protective systems - Part 1: 2-bar explosion proof ventilation structure
SIST EN 14591-1:2005

This document applies to air shutter frames and air doors for ventilation structures which are to remain functional after the passage of explosions with overpressures of up to 2 bar.
Ventilation structures are protective systems to provide the ventilation flow after the occurrence of an explosion such that the effects of an explosion on the ventilation system can be limited and adequate possibilities remain for escape and rescue.
NOTE   These structures may be used when ventilation studies indicate that the air flow in the work place would be reduced considerably providing no safe escape for workers in cases where the structure is destroyed. Explosion proof ventilation structures will be individually evaluated for directional stability of ventilation flows and in order to ensure adequate ventilation flows.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1417:2023(Main)
Plastics and rubber machines - Two-roll mills - Safety requirements
SIST EN 1417:2024

This document deals with all significant hazards, hazardous situations or hazardous events relevant to two-roll mills for the processing of rubber and/or plastics (see Annex A), when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer during all the phases of the life of the machine as described in EN ISO 12100:2010, 5.4.
This document covers two-roll mills as defined in 3.1.
This document covers two-roll mills intended to be used in normal production and two-roll mills intended to be used in laboratories (testing of mixtures by batchwise processing of small amounts, not continuously).
This document is applicable to the following ancillary equipment as integral part of the machine:
-   powered stock guides;
-   strip cutting device;
-   stock blender;
-   recovery conveyor belt;
-   retractable ploughs;
-   secondary roller;
-   supply of heating and/or cooling fluids.
This document does not apply to the design of a local exhaust ventilation system that might be necessary in specific applications of the machine not known by the manufacturer.
This document does not apply to two-roll mills manufactured before the date of its publication as a European Standard.

  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 80601-2-84:2023(Main)
Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment (ISO 80601-2-84:2023)
kSIST FprEN ISO 80601-2-84:2022

This document applies to the basic safety and essential performance of an EMS ventilator in combination with its accessories, hereafter also referred to as ME equipment:
¾     intended for patients who need differing levels of support from artificial ventilation including ventilator-dependent patients;
¾     intended to be operated by a healthcare professional operator;
¾     intended for use in the EMS environment; and
¾     intended for invasive or non-invasive ventilation.
NOTE 2     An EMS ventilator can also be used for transport within a professional healthcare facility.
An EMS ventilator is not considered to use a physiologic closed loop-control system unless it uses a physiological patient variable to adjust the  artificial ventilation therapy settings.
This document is also applicable to those accessories intended by their manufacturer to be connected to the ventilator breathing system, or to an EMS ventilator, where the characteristics of those accessories can affect the basic safety or essential performance of the EMS ventilator.
NOTE 3     If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant.
Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in IEC 60601‑1:2005+AMD1:2012+AMD2:2020, 7.2.13 and 8.4.1.
NOTE 4     Additional information can be found in IEC 60601-1:2005+AMD1:2012+AMD2:2020, 4.2.
This document does not specify the requirements for the following:
NOTE 5     See ISO/TR 21954 for guidance on the selection of the appropriate ventilator for a given patient. 
¾     ventilators or accessories intended for ventilator-dependent patients in critical care applications, which are given in ISO 80601-2-12.
¾     ventilators or accessories intended for ventilator-dependent patients in the home healthcare environment, which are given in ISO 80601-2-72.
¾     ventilators or accessories intended for anaesthetic applications, which are given in ISO 80601‑2‑13.
¾     ventilators or accessories intended for ventilatory support equipment (intended only to augment the ventilation of spontaneously breathing patients), which are given in ISO 80601‑2-79 and ISO 80601-2-80.
¾     obstructive sleep apnoea therapy ME equipment, which are given in ISO 80601‐2‐70.
¾     user-powered resuscitators, which are given in ISO 10651‐4.
¾     gas-powered emergency resuscitators, which are given in ISO 10651‐5.
¾     continuous positive airway pressure (CPAP) ME equipment.
¾     high‐frequency jet ventilators (HFJVs), which are given in ISO 80601-2-87.
¾     high‐frequency oscillatory ventilators (HFOVs)[44], which are given in ISO 80601-2-87.
NOTE 6      An EMS ventilator can incorporate high-frequency jet or high-frequency oscillatory ventilation-modes.
¾     respiratory high-flow therapy equipment, which are given in ISO 80601-2-90.
NOTE 7      An EMS ventilator can incorporate high-flow therapy operational mode, but such a mode is only for spontaneously breathing patients.
¾     oxygen therapy constant flow ME equipment.
¾     cuirass or “iron‐lung” ventilators.

  • Draft
    150 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 18010:2023(Main)
Chemical disinfectants and antiseptics - Information on the preparation of spores and determination/exclusion of sporistatical activity
kSIST-TP FprCEN/TR 18010:2023

This document provides additional information and recommendations on the preparation of spores and a
test method to determine / exclude sporistatical activity respectively differentiate between sporistatical
and sporicidal activity of a product.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16395:2023(Main)
Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document
SIST-TP CEN/TR 16395:2024

This Technical Report gives explanation on the pressure definitions and pressure units used by the gas network operators with regard to the standards of CEN/TC 234 “Gas infrastructure” listed in Clause 2.
The European Standards of CEN/TC 234 comprise the functional requirements in the field of gas infrastructure from the input of gas into the on-shore transmission network up to the inlet connection of gas appliances, including transmission, distribution, storage, compression, pressure regulation and metering, installation, injection of (renewable) gases such as biomethane, hydrogen, gas quality issues and others.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day