EN ISO 17962:2015
(Main)Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems (ISO 17962:2015)
Agricultural machinery - Equipment for sowing - Minimization of the environmental effects of fan exhaust from pneumatic systems (ISO 17962:2015)
ISO 17962:2015 specifies various means of minimizing the environmental effects of fan exhaust from pneumatic systems for vacuum-style sowing agricultural field equipment used for sowing coated seeds.
It is applicable to vacuum-style sowing systems where "dust off" (fugitive) material from seed coatings can mix with fan (blower) intake air and be exhausted into the atmosphere.
ISO 17962:2015 is not applicable to
- conveyance systems between a central tank and remote meters where the air is exhausted at the remote meters, and
- conveyance systems where the meter is at a central tank and the air is exhaust at a ground engaging opening device.
The design principles in this International Standard are not applicable to pneumatic equipment for sowing which was manufactured before the date of its publication.
NOTE National or local requirements can apply which could be more stringent.
Landmaschinen - Sägeräte - Minimierung der Umweltauswirkungen von Gebläseabluft bei pneumatischen Geräten (ISO 17962:2015)
Diese Internationale Norm legt verschiedene Mittel fest zur Verminderung der Umweltauswirkungen von Gebläseabluft aus pneumatischen Anlagen bei landwirtschaftlichen Vakuum-Sägeräten, die zur Aussaat von beschichtetem Saatgut verwendet werden.
Diese Norm gilt für Vakuum-Sägeräte, bei denen sich (flüchtiger) Abrieb von Saatgutbeschichtungen mit der Ansaugluft des Gebläses mischen und in die Atmosphäre freigesetzt werden kann. Diese Geräte sind Bestandteile von Maschinen, die nach ISO 3339/0 als 04.1.02.5 (pneumatische Drillmaschinen) klassifiziert sind.
Diese Internationale Norm gilt nicht für:
- Zuführeinrichtungen zwischen einem zentralen Behälter und entfernt liegenden Dosierorganen, bei denen die Luft an den entfernt liegenden Dosierorganen freigesetzt wird;
- Zuführeinrichtungen, bei denen das Dosierorgan sich an einem zentralen Behälter befindet und die Luft an einem Einbettungswerkzeug freigesetzt wird.
Die Gestaltungsgrundsätze in dieser Internationalen Norm gelten nicht für pneumatische Sägeräte, die vor dem Datum der Veröffentlichung hergestellt wurden.
ANMERKUNG Es können nationale oder lokale Anforderungen gelten, die strenger sein könnten.
Matériel agricole - Semoirs - Considérations pour réduire au minimum les effets de l'échappement du ventilateur des systèmes pneumatiques (ISO 17962:2015)
ISO 17962:2015 internationale spécifie les différents moyens pour minimaliser les effets sur l'environnement de l'échappement des ventilateurs des systèmes pneumatiques des semoirs agricoles de type à aspiration utilisés pour semer des graines enrobées.
Elle s'applique aux systèmes d'ensemencement de type à aspiration où les matériaux pulvérulents (fugitifs) des enrobages de semences peuvent se mélanger à l'air entrant du ventilateur (souffleur) et être évacués dans l'atmosphère.
ISO 17962:2015 ne s'applique pas aux :
- systèmes de transfert situés entre un réservoir central et des boitiers distants permettant la distribution, par lesquels l'air est expulsé, et
- systèmes de transfert où le doseur est situé sur un réservoir central et où l'air est évacué vers le dispositif d'ouverture du sillon.
Les principes de conception de la présente Norme internationale ne sont pas applicables aux semoirs pneumatiques qui ont été fabriqués avant sa date de publication.
NOTE Les prescriptions nationales ou locales pouvant être plus rigoureuses peuvent s'appliquer.
Kmetijski stroji - Oprema za sejanje - Zmanjšanje vplivov izpuhov iz pnevmatskih sistemov na okolje (ISO 17962:2015)
Ta mednarodni standard (tehnična specifikacija) določa različna sredstva za zmanjšanje vplivov izpuhov iz pnevmatskih sistemov za kmetijsko opremo za podtlačno setev (sejanje) obloženih semen. Uporabe načel projektiranja, izračunov in metod preskušanja so sprejemljivi načini zmanjšanja vplivov izpuhov. Uporablja se za sisteme za podtlačno sejanje (setev), kjer se lahko »prašni« (ubežni) material iz obloge semen zmeša z vhodnim zrakom ventilatorja in izpusti v ozračje. Ta mednarodni standard (tehnična specifikacija) se ne uporablja za: – transportne sisteme med glavnim zbiralnikom in oddaljenimi merilniki, kjer se zrak izpusti pri oddaljenih merilnikih;
– transportne sisteme, kjer je merilnik ob glavnem zbiralniku in je izpust zraka ob napravi za odpiranje pri tleh. Ta mednarodni standard (tehnična specifikacija) se ne uporablja za pnevmatsko opremo za sejanje, ki je bila izdelana, preden je bil standard objavljen. OPOMBA: Veljajo lahko strožje nacionalne ali lokalne zahteve. OPOMBA: Primeri sistemov so prikazani v dodatku D.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17962:2015
01-oktober-2015
Kmetijski stroji - Oprema za sejanje - Zmanjšanje vplivov izpuhov iz pnevmatskih
sistemov na okolje (ISO 17962:2015)
Agricultural machinery - Equipment for sowing - Minimization of the environmental effects
of fan exhaust from pneumatic systems (ISO 17962:2015)
Landmaschinen - Sägeräte - Minimierung der Umweltauswirkungen von Gebläseabluft
bei pneumatischen Geräten (ISO 17962:2015)
Matériel agricole - Semoirs - Considérations pour réduire au minimum les effets de
l'échappement du ventilateur des systèmes pneumatiques (ISO 17962:2015)
Ta slovenski standard je istoveten z: EN ISO 17962:2015
ICS:
65.060.30 Sejalna in sadilna oprema Sowing and planting
equipment
SIST EN ISO 17962:2015 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17962:2015
---------------------- Page: 2 ----------------------
SIST EN ISO 17962:2015
EUROPEAN STANDARD
EN ISO 17962
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2015
ICS 65.060.30
English Version
Agricultural machinery - Equipment for sowing - Minimization of
the environmental effects of fan exhaust from pneumatic
systems (ISO 17962:2015)
Matériel agricole - Semoirs - Considérations pour réduire au Landmaschinen - Sägeräte - Minimierung der
minimum les effets de l'échappement du ventilateur des Umweltauswirkungen von Gebläseluft bei pneumatischen
systèmes pneumatiques (ISO 17962:2015) Geräten (ISO 17962:2015)
This European Standard was approved by CEN on 16 April 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17962:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17962:2015
EN ISO 17962:2015 (E)
Contents
Page
European foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17962:2015
EN ISO 17962:2015 (E)
European foreword
This document (EN ISO 17962:2015) has been prepared by Technical Committee ISO/TC 23 “Tractors and
machinery for agriculture and forestry” in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at
the latest by January 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17962:2015 has been approved by CEN as EN ISO 17962:2015 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17962:2015
---------------------- Page: 6 -----
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.