EN 4627:2022

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa

This document specifies the requirements relating to:
Steel X4CrNiMo16-5-1 (1.4418)
Air melted
Hardened and tempered
Forgings
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.
NOTE   Other common designations:
-   AIR: Z 8 CND 17-04.
-   Only the chemical composition according to this document is considered.

Luft- und Raumfahrt - Stahl X4CrNiMo16 5 1 (1.4418) - Lufterschmolzen - Gehärtet und angelassen - Schmiedestücke - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa

Dieses Dokument legt die Anforderungen an:
Stahl X4CrNiMo16 5 1 (1.4418)
lufterschmolzen
gehärtet und angelassen
Schmiedestücke
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
für Anwendungen in der Luft  und Raumfahrt fest.
ANMERKUNG   Weitere übliche Bezeichnungen:
   AIR: Z 8 CND 17 04.
   Es wird nur die chemische Zusammensetzung nach diesem Dokument berücksichtigt.

Série aérospatiale - Acier X4CrNiMo16-5-1 (1.4418) - Élaboré à l'air - Trempé et revenu - Pièces forgées ou matricées - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa

Le présent document spécifie les exigences relatives à :
Acier X4CrNiMo16-5-1 (1.4418)
Élaboré à l’air
Trempé et revenu
Pièces forgées ou matricées
De ≤ 200 mm
1 150 MPa ≤ Rm ≤ 1 300 MPa
pour les applications aérospatiales.
NOTE   Autres désignations communes :
-   AIR : Z 8 CND 17-04.
-   Seule la composition chimique selon le présent document est prise en compte.

Aeronavtika - Jeklo X4CrNiMo16-5-1 (1.4418) - Taljeno - Utrjeno in mehko žarjeno - Izkovki - De ≤ 200 mm - 1150 MPa ≤ Rm ≤ 1300 MPa

Ta dokument določa zahteve, ki se navezujejo na:
jeklo X4CrNiMo16-5-1 (1.4418),
taljeno,
utrjeno in mehko žarjeno,
izkovke,
De ≤ 200 mm,
1150 MPa ≤ Rm ≤ 1300 MPa,
za uporabo v aeronavtiki.
OPOMBA:   Druge pogoste oznake:
– AIR: Z 8 CND 17-04.
– Upošteva se le kemijska sestava v skladu s tem dokumentom.

General Information

• Status: Published
• Publication Date: 20-Dec-2022
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Dec-2022
• Completion Date: 21-Dec-2022
• Ref Project: SIST EN 4627:2023 - Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa

Relations

• Replaces: EN 4627:2014 - Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
• Effective Date: 11-Dec-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4627:2023
01-marec-2023
Nadomešča:
SIST EN 4627:2014
Aeronavtika - Jeklo X4CrNiMo16-5-1 (1.4418) - Taljeno - Utrjeno in mehko žarjeno -
Izkovki - De ≤ 200 mm - 1150 MPa ≤ Rm ≤ 1300 MPa
Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and
tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 (1.4418) - Lufterschmolzen - Gehärtet- und
angelassen - Schmiedestücke - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Série aérospatiale - Acier X4CrNiMo16-5-1 (1.4418) - Élaboré à l'air - Trempé et revenu
- Pièces forgées ou matricées - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
Ta slovenski standard je istoveten z: EN 4627:2022
ICS:
49.025.10 Jekla Steels
77.140.85 Železni in jekleni kovani Iron and steel forgings
izdelki
SIST EN 4627:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4627:2023

---------------------- Page: 2 ----------------------
SIST EN 4627:2023


EN 4627
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2022
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 4627:2014
English Version

Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air
melted - Hardened and tempered - Forgings - D ≤ 200 mm
e
- 1 150 MPa ≤ R ≤ 1 300 Mpa
m
Série aérospatiale - Acier X4CrNiMo16-5-1 (1.4418) - Luft- und Raumfahrt - Stahl X4CrNiMo16-5-1 (1.4418)
Élaboré à l'air - Trempé et revenu - Pièces forgées ou - Lufterschmolzen - Gehärtet- und angelassen -
matricées - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa Schmiedestücke - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1
300 MPa
This European Standard was approved by CEN on 22 August 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4627:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 4627:2023
EN 4627:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Requirements . 6
Bibliography . 10

2

---------------------- Page: 4 ----------------------
SIST EN 4627:2023
EN 4627:2022 (E)
European foreword
This document (EN 4627:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to it
...