EN 12697-32:2003
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor
This procedure describes a compaction method for the preparation of bituminous test specimens using a vibratory compaction technique. The method is applicable for both loose mixtures and cores and can be used to establish a reference density for a bituminous mixture, in accordance with the procedures described in prEN 12697-9 or the ease of compaction, as described in prEN 12697-10.
Asphalt - Prüfverfahren für Heißasphalt - Teil 32: Laborverdichtung von Asphalt mit einem Vibrationsverdichter
Diese Europäische Norm legt ein Verdichtungsverfahren zur Herstellung von Asphalt-Probekörpern mit Hilfe einer Vibrationstechnik fest. Das Verfahren ist anwendbar sowohl auf loses Mischgut als auch auf Bohrkerne und kann angewendet werden, um eine Bezugsraumdichte für einen Asphalt nach prEN 12697-9 oder die Verdichtbarkeit prEN 12697-10 zu ermitteln.
Mélanges bitumineux - Méthodes d'essais pour enrobés à chaud - Partie 32: Compactage en laboratoire de mélanges bitumineux par compacteur vibratoire
La présente Norme européenne décrit une méthode d'essai pour la préparation d'éprouvettes bitumineuses utilisant une technique de compactage vibratoire.
Cette Norme européenne s'applique aux carottes et aux mélanges foisonnés et est utilisée afin de déterminer une masse volumique de référence pour un mélange bitumineux conformément aux modes opératoires décrits dans l'EN 12697-9 ou la compactabilité comme décrit dans l'EN 12697-10.
Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 32. del: Laboratorijska zgostitev bitumenskih zmesi z vibracijskim zgoščevalnikom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bituminous mixtures - Test methods for hot mix asphalt - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactorDOQLNRPMélanges bitumineux - Méthodes d'essais pour enrobés a chaud - Partie 32: Compactage en laboratoire de mélanges bitumineux par compacteur vibratoireAsphalt - Prüfverfahren für Heißasphalt - Teil 32: Laborverdichtung von Asphalt mit einem VibrationsverdichterTa slovenski standard je istoveten z:EN 12697-32:2003SIST EN 12697-32:2004en93.080.20Materiali za gradnjo cestRoad construction materialsICS:SLOVENSKI
STANDARDSIST EN 12697-32:200401-junij-2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12697-32March 2003ICS 93.080.20English versionBituminous mixtures - Test methods for hot mix asphalt - Part32: Laboratory compaction of bituminous mixtures by vibratorycompactorMélanges bitumineux - Méthodes d'essais pour enrobés àchaud - Partie 32: Compactage en laboratoire de mélangesbitumineux par compacteur vibratoireAsphalt - Prüfverfahren für Heißasphalt - Teil 32:Laborverdichtung von Asphalt mit einemVibrationsverdichterThis European Standard was approved by CEN on 21 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12697-32:2003 E
EN 12697-32:2003 (E)2ContentsPageForeword.31Scope.62Normative references.63Terms and definitions.64Principle.75Materials.76Apparatus.77Preparation of test specimens.87.1Core Specimens.87.2Plant-mixed materials.97.3Laboratory-mixed materials.98Calculation and expression of results.99Test report.910Precision.9Annex A (normative)
Test method for determining the suitability of a vibrating hammer for laboratorycompaction.12A.1Principle.12A.2Apparatus.12A.3Materials.12A.4Preparation of sample.12A.5Procedure.12A.6Calculation and expression of results.13A.7Calibration certificate.14Bibliography.15
EN 12697-32:2003 (E)3ForewordThis document (EN 12697-32;2003) has been prepared by Technical Committee CEN/TC 227 "Road materials",the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by August 2005.This European Standard is one of a series of standards as follows:EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content.EN 12697-2, Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle sizedistribution.EN 12697-3, Bituminous mixtures — Test methods for hot mix asphalt — Part 3: Binder recovery: Rotaryevaporator.EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Binder recovery: Fractionatingcolumn.EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the maximumdensity.EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density ofbituminous specimen by hydro-static method.EN 12697-7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density ofbituminous specimens by gamma rays.EN 12697-8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of voidcharacteristics of bituminous specimens.EN 12697-9, Bituminous mixtures — Test methods for hot mix asphalt — Part 9: Determination of the referencedensity.EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactibility.prEN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of thecompactibility between aggregate and binder.prEN 12697-12, Bituminous mixtures —
Test methods for hot mix asphalt — Part 12: Determination of the watersensitivity of bituminous specimens.EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature measurement.EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content.EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of thesegregation sensitivity.prEN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres.
EN 12697-32:2003 (E)4prEN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous asphalt specimen.prEN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage from porousasphalt.prEN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen.prEN 12697-20, Bituminous mixtures —
Test methods for hot mix asphalt — Part 20: Indentation using cube ormarshall specimen.prEN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using platespecimens.prEN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking.prEN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the indirecttensile strength of bituminous specimens.prEN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue.prEN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test.prEN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness.EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling.EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples fordetermining binder content, water content and grading.prEN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of thedimensions of a bituminous specimen.prEN 12697-30, Bituminous mixtures — Test methods for hot mix asphalt — Part 30 Specimen preparation, impactcompactor.prEN 12697-31, Bituminous mixtures — Test methods for hot mix asphalt — Part 31: Specimen preparation,gyratory compactor.EN 12697-32, Bituminous mixtures — Test methods for hot mix asphalt — Part 32: Laboratory compaction ofbituminous mixtures by a vibratory compactor.prEN 12697-33, Bituminous mixtures — Test methods for hot mix asphalt — Part 33: Specimen preparation, slabcompactor.prEN 12697-34, Bituminous mixtures — Test methods for hot mix asphalt — Part 34: Marshall test.prEN 12697-35, Bituminous mixtures — Test methods for hot mix asphalt — Part 35: Laboratory mixing.EN 12697-36, Bituminous mixtures — Test methods for hot mix asphalt — Part 36: Determination of the thicknessof a bituminous pavement.prEN 12697-37, Bituminous mixtures — Test methods for hot mix asphalt — Part 37: Hot sand test for theadhesivity of binder on precoated chippings for HRA.prEN 12697-38, Bituminous mixtures — Test methods for hot mix asphalt — Part 38: Test equipment andcalibration.The applicability of this European Standard is described in the product standards for bituminous mixtures.
EN 12697-32:2003 (E)5No existing European Standard is superseded.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.
EN 12697-32:2003 (E)61 ScopeThis European Standard describes a test method for the preparation of bituminous test specimens using a vibratorycompaction technique.This European Standard is applicable to loose mixtures and cores and is used to establish a reference density for abituminous mixture in accordance with the procedures described in EN 12697-9, or the ease of compaction asdescribed in EN 12697-10.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density ofbituminous specimen by hydro-static method.EN 12697-9, Bituminous mixtures — Test methods for hot mix asphalt — Part 9: Determination of the referencedensity.EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactibility.EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content.EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling.prEN 12697-30, Bituminous mixtu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.