iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

ENV 26385:1990

(Main)

Ergonomic principles of the design of work systems (ISO 6385: 1981)

Ergonomic principles of the design of work systems (ISO 6385: 1981)

Prinzipien der Ergonomie in der Auslegung von Arbeitssystemen (ISO 6385:1981)

Principes ergonomiques de la conception des systèmes de travail (ISO 6385:1981)

Les exigences particulières de la présente partie de la CEI 60364 s'appliquent seulement aux circuits destinés à alimenter les véhicules de loisirs, les tentes ou les habitations de parc résidentiel dans les parcs de caravanes, dans les parcs de camping et aux emplacements analogues.
Les exigences particulières ne s'appliquent pas aux installations électriques intérieures des véhicules de loisirs, des unités mobiles ou transportables ou aux habitations de parc résidentiel.
Il convient que les installations électriques autres que celles concernant les circuits terminaux des parcs de caravanes, fassent l'objet des exigences générales de la CEI 60364, ainsi que des exigences particulières de la Partie 7.
Cette deuxième édition de la CEI 60364-7-708 annule et remplace la première édition, parue en 1988, ainsi que l'amendement 1 (1983). Elle constitue une révision technique.
Les modifications principales par rapport à l'édition précédente sont les suivantes :
- des exigences pour l'installation électrique des caravanes et caravanes à moteur sont maintenant couvertes par la Partie 721;
- des exigences dans la présente partie sont alignées sur celles des autres parties de la CEI 60364;
- un DDR de 30 mA maintenant ne protège qu'une prise de courant.

Ergonomska načela za načrtovanje delovnih sistemov (ISO 6385:1981)

General Information

Status
Withdrawn
Publication Date
26-Jun-1990
Withdrawal Date
31-Jan-2004
ICS
13.180 - Ergonomics
Technical Committee
CEN/TC 122 - Ergonomics
Drafting Committee
CEN/TC 122 - Ergonomics
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Feb-2004
Completion Date
01-Feb-2004
Ref Project
SIST ENV 26385:2001 - Ergonomic principles of the design of work systems (ISO 6385: 1981)

Relations

Replaced By
EN ISO 6385:2004 - Ergonomic principles in the design of work systems (ISO 6385:2004)
Effective Date
22-Dec-2008

Buy Standard

ENV 26385:2001ENV 26385:2001
PreviousNext
Standard
ENV 26385:2001
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 26385:2001
01-marec-2001
(UJRQRPVNDQDþHOD]DQDþUWRYDQMHGHORYQLKVLVWHPRY ,62
Ergonomic principles of the design of work systems (ISO 6385: 1981)
Prinzipien der Ergonomie in der Auslegung von Arbeitssystemen (ISO 6385:1981)
Principes ergonomiques de la conception des systemes de travail (ISO 6385:1981)
Ta slovenski standard je istoveten z: ENV 26385:1990
ICS:
13.180 Ergonomija Ergonomics
SIST ENV 26385:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ENV 26385:2001

---------------------- P
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17558:2023(Main)
Ergonomics - Ergonomics of PPE ensembles
SIST EN 17558:2023

This document contains test methods for comparing the performance of different ensembles as part of any PPE selection process.
This document does not replace the product standards for the certification of individual items of PPE. It specifies the testing of individual items of PPE as an ensemble, so that the interactions between the individual items of PPE can be evaluated and any adverse interactions between the individual items of PPE, the user and the environment can be identified.
It specifies requirements for testing by either assessing the performance of a PPE ensemble against a benchmark condition (i.e. benchmark testing) or assessing the performance of two or more PPE ensembles against each other (i.e. comparative testing).
This document incorporates examples of laboratory and field tests. It can also be used to assess the performance regarding the ergonomics of an ensemble that incorporates an item of PPE that has never before been incorporated into an ensemble, and the listed methods can be combined into dedicated test batteries for evaluating that ensemble.

  • Draft
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 9241-100:2023(Main)
Ergonomics of human-system interaction - Part 100: Overview of ISO 9241 software ergonomic standards (ISO/TR 9241-100:2023)
SIST-TP CEN ISO/TR 9241-100:2023

This document provides an overview of ISO 9241 software ergonomic standards in the form of executive summaries of these standards, in particular the parts in the ISO 9241-1XX family of documents. In addition, it provides executive summaries for ISO 9241-11, ISO 9241-210 and ISO 9241-220, which have specific relevance to the design of software-based interactive systems.
This document is intended for the following types of users:
—     managers, who are involved in planning and managing product, system and/or service development projects, who are to be informed on the human-centred design approach and on guidance on software ergonomics;
—     developers, who will apply the guidance in these documents during the development process (either directly, based on training, or by using tools and style guides which incorporate the guidance);
—     user interface design roles (including interaction designers, information architects, user interface designers, visual designers and content creators), who will apply the guidance in these documents during the creation and design process (either directly, based on training, or by using tools and style guides which incorporate the guidance);
—     user researchers, who are responsible for identifying user needs and inform context of use of a product, system or service;
—     evaluators, who are responsible for ensuring that products, systems or services meet the recommendations contained in these documents;
—     buyers, who will reference these documents in contracts during product procurement;
—     designers of user interface development tools and style guides to be used by user interface designers and developers.
While the documents are applicable to all types of interactive systems, they do not cover the specifics of every context of use, such as safety critical systems and collaborative work.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 9241-430:2023(Main)
Ergonomics of human-system interaction - Part 430: Recommendations for the design of non-touch gestural input for the reduction of biomechanical stress (ISO/TS 9241-430:2021)
SIST-TS CEN ISO/TS 9241-430:2023

This document provides guidance on the design, selection and optimization of non-contacting hand and arm gestures for human-computer interaction. It addresses the assessment of usability and fatigue associated with different gesture set designs and provides recommendations for approaches to evaluating the design and selection of gestures. This document also provides guidance on the documentation of the process for selecting gesture sets.
This document applies to gestures expressed by humans. It does not consider the technology for detecting gestures or the system response when interpreting a gesture. Non-contacting hand gestures can be used for input in a variety of settings, including the workplace or in public settings and when using fixed screens, mobile, virtual reality, augmented reality or mixed-mode reality devices.
Some limitations of this document are:
—    The scope is limited to non-contacting gestures and does not include other forms of inputs. For example, combining gesture with speech, gaze or head position can reduce input error, but these combinations are not considered here.
—    The scope is limited to non-contacting arm, hand and finger gestures, either unilateral (one-handed) or bilateral (two-handed).
—    The scope assumes that all technological constraints are surmountable. Therefore, there is no consideration of technological limitations with interpreting ultra-rapid gestures, gestures performed by people of different skin tones or wearing different colours or patterns of clothing.
—    The scope is limited to UI-based command-and-control human computer interaction (HCI) tasks and does not include gaming scenarios, although the traversal of in-game menus and navigation of UI elements is within scope.
—    The scope does not include HCI tasks for which an obviously more optimal input method exists. For example, speech input is superior for inputting text than gesture input.
—    The scope includes virtual reality (VR), augmented reality (AR) and mixed reality (MR) and the use of head-mounted displays (HMDs).
—    The scope does not include the discoverability of gestures but does include the learnability and memorability of gestures. It is assumed that product documentation and tutorials will adequately educate end users about which gestures are possible. Therefore, assessing gesture discoverability is not a primary goal of the recommendations in this document.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 9241-311:2023(Main)
Ergonomics of human-system interaction - Part 311: Application of ISO 9241-307: LCD screens for workstations (ISO/TR 9241-311:2022)
SIST-TP CEN ISO/TR 9241-311:2023

This document provides information relating to the specification of liquid crystal display (LCD) screens at visual display workstations in indoor location, in accordance with ISO 9241-307:2008 clause 5.2. The decision guidance is limited to LCD screens, since these are typically used at workstations.
The information is intended to support managerial decision makers (e. g. procurement operators, companies’ safety committees, occupational safety and health professionals), who are responsible for the acquisition of visual displays.

  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 9241-514:2022(Main)
Ergonomics of human-system interaction - Part 514: Guidance for the application of anthropometric data in the ISO 9241-500 series (ISO/TR 9241-514:2020)
SIST-TP CEN ISO/TR 9241-514:2023

This document is intended to provide guidance in the use of anthropometric data within the ISO 9241-500 series.

  • Technical report
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15537:2022(Main)
Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2022)
SIST EN ISO 15537:2022

This document establishes methods for determining the composition of groups of persons whose anthropometric characteristics are to be representative of the intended user population of any specific object under test.
This document is applicable to the testing of anthropometric aspects of industrial products and designs having direct contact with the human body or dependent on human body measurements, such as machinery, work equipment, personal protective equipment (PPE), consumer goods, working spaces, architectural details or transportation equipment.
This document is also applicable to the testing of such safety aspects of products that are dependent on human body measurements. It does not deal with other aspects of the task or other requirements, such as perception of information (except geometrical arrangement of the viewing targets) and the use of controls (except their geometrical placement).
Although this document deals with selecting test persons from an anthropometric perspective, similar general principles can be applied for other test variables, e.g. biomechanical aspects.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9241-940:2022(Main)
Ergonomics of human-system interaction - Part 940: Evaluation of tactile and haptic interactions (ISO 9241-940:2017)
SIST EN ISO 9241-940:2022

ISO 9241-940:2017
-      describes the types of methods that can be used for the evaluation of haptic devices and of systems that include haptic devices,
-      specifies a procedure for the evaluation of haptic interactions by a usability walkthrough or usability test (see Annex J), and
-      provides guidance on the types of methods that are appropriate for the evaluation of specific attributes of haptic systems, cross-referenced to the guidance in the relevant clauses of other International Standards (see Annexes A, B, C, D, E, F and G).
It applies to the following types of interaction:
-      augmented reality - information overlaid on a real scene, e.g. vibrating belt indicating distance;
-      gesture control of a device or a virtual scenario;
-      unidirectional interaction such as a vibrating phone or a vibrating belt;
-      virtual environment - virtual space with which a user can interact with the aid of a haptic device.
ISO 9241-940:2017 applies to the following types of devices:
-      gesture sensor, e.g. video that discerns 3D hand movements, touch screens that sense 2D touches;
-      kinaesthetic haptic device, e.g. desktop haptic interface;
-      tactile display, e.g. vibrating phone.
ISO 9241-940:2017 is not applicable to standard input devices such as keyboards, mice or track balls.
NOTE       ISO 9241‑400 covers standard input devices, and ISO 9241‑411 applies to the evaluation of input devices such as keyboards and mice.
ISO 9241-940:2017 can be used to identify the types of methods and measures for
-      establishing benchmarks,
-      establishing requirements for haptic interaction,
-      identifying problems with haptic interaction (formative evaluation), and
-      use of the criteria to establish whether a haptic system meets requirements (summative evaluation).

  • Standard
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9241-971:2022(Main)
Ergonomics of human-system interaction - Part 971: Accessibility of tactile/haptic interactive systems (ISO 9241-971:2020)
SIST EN ISO 9241-971:2022

This document provides both general and specific ergonomic requirements and recommendations for accessible tactile/haptic interactive systems, including accessible tactile/haptic interactions.
This document provides guidance for increasing the accessibility of interactive systems making use of tactile/haptic input/output modalities such as gestures, vibration, and force feedback. The guidance provided also supports alternative input modalities and the use of different output representations.
This document provides guidance for tactile/haptic interactions that is applicable to a variety of interactive systems, including assistive technologies (AT).

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 9241-810:2022(Main)
Ergonomics of human-system interaction - Part 810: Robotic, intelligent and autonomous systems (ISO/TR 9241-810:2020)
SIST-TP CEN ISO/TR 9241-810:2022

This document addresses:
—     physically embodied RIA systems, such as robots and autonomous vehicles with which users will physically interact;
—     systems embedded within the physical environment with which users do not consciously interact, but which collect data and/or modify the environment within which people live or work such as smart building and, mood-detection;
—     intelligent software tools and agents with which users actively interact through some form of user interface;
—     intelligent software agents which act without active user input to modify or tailor the systems to the user's behaviour, task or some other purpose, including providing context specific content/information, tailoring adverts to a user based on information about them, user interfaces that adapt to the cognitive or physiological state, "ambient intelligence";
—     the effect on users resulting from the combined interaction of several RIA systems such as conflicting behaviours between the RIA systems under the same circumstances;
—     the complex system-of-systems and sociotechnical impacts of the use of RIA systems, particularly on society and government.
This document is not an exploration of the philosophical, ethical or political issues surrounding robotics, artificial intelligence, machine learning, and intelligent machines or environments. For matters of ethics and political issues, see standards such as BS 8611 and IEC P7000. However, this document does identify where and why ethical issues need to be taken into account for a wide range of systems and contexts, and as such it provides information relevant to the broader debate regarding RIA systems.
This document has a broader focus than much of the early work on autonomy that relates to the automation of control tasks and mechanization of repetitive physical or cognitive tasks, and centres on levels of automation.
Although this document addresses a wide range of technology applications, and sector and stakeholder views on the issues, the treatment of each can be incomplete due to the diverse and increasingly varied applications of RIA systems.

  • Technical report
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TR 9241-312:2022(Main)
Ergonomics of human-system interaction - Part 312: Readability of electrophoretic displays (ISO/TR 9241-312:2020)
SIST-TP CEN ISO/TR 9241-312:2022

This document provides an overview of recent research on readability of electrophoretic displays. It also provides information for evaluating readability of electrophoretic displays and defining the context of their use.

  • Technical report
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day