EN 12085:2013

Thermal insulating products for building applications - Determination of linear dimensions of test specimens

This European Standard specifies the characteristics and choice of measuring equipment and the procedure for determining the linear dimensions of test specimens which are taken from thermal insulating products. The procedures for measuring the dimensions of full size products are specified in EN 822 and EN 823.

Wärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von Probekörpern

Diese Norm legt die Leistungsmerkmale und die Auswahl von Messeinrichtungen und das Verfahren zur Bestimmung der linearen Maße von Probekörpern, die aus einem Wärmedämmstoff entnommen wurden, fest. Die Verfahren zur Bestimmung der Maße von Produkten in Liefermaßen sind in EN 822 und EN 823 beschrieben.

Produits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes

La présente Norme européenne spécifie les caractéristiques et le choix de l'équipement de mesure, ainsi que le mode opératoire permettant de déterminer les dimensions linéaires des éprouvettes prélevées sur les produits isolants thermiques. Les modes opératoires pour mesurer les dimensions des produits en vraies dimensions sont définis dans l'EN 822 et l'EN 823.

Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje linearnih dimenzij preskušancev

Ta evropski standard določa karakteristike in izbiro merilne opreme ter postopek za ugotavljanje linearnih dimenzij preskušancev iz toplotnoizolacijskih proizvodov. Postopki za merjenje dimenzij proizvodov naravne velikosti so navedeni v standardih EN 822 in EN 823.

General Information

• Status: Withdrawn
• Publication Date: 12-Mar-2013
• Withdrawal Date: 20-Sep-2022
• ICS: 91.100.60 - Thermal and sound insulating materials
• ICS: 91.100.99 - Other construction materials
• Technical Committee: CEN/TC 88 - Thermal insulating materials and products
• Drafting Committee: CEN/TC 88/WG 1 - Common general test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 21-Sep-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 12085:2013 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens

Relations

• Replaces: EN 12085:1997 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens
• Effective Date: 21-Dec-2011
• Replaced By: EN ISO 29768:2022 - Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
• Effective Date: 28-Apr-2021

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje linearnih dimenzij preskušancevWärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von ProbekörpernProduits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes d'essaiThermal insulating products for building applications - Determination of linear dimensions of test specimens91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 12085:2013SIST EN 12085:2013en,fr,de01-julij-2013SIST EN 12085:2013SLOVENSKI
STANDARDSIST EN 12085:19991DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12085
March 2013 ICS 91.100.60 Supersedes EN 12085:1997English Version
Thermal insulating products for building applications - Determination of linear dimensions of test specimens
Produits isolants thermiques destinés aux applications du bâtiment - Détermination des dimensions linéaires des éprouvettes
Wärmedämmstoffe für das Bauwesen - Bestimmung der linearen Maße von Probekörpern This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12085:2013: ESIST EN 12085:2013

The revision of this standard contains no major changes, only minor corrections and clarifications of an editorial nature. This European Standard is one of a series of standards which specify test methods for determining dimensions and properties of thermal insulating materials and products. It supports a series of product standards for thermal insulating materials and products which derive from the Council Directive of 21 December 1988 on the approximation of laws, regulations and administrative provisions of the Member States relating to construction products (Directive 89/106/EEC) through the consideration of the essential requirements. This European Standard has been drafted for applications in buildings but it may also be used in other areas where it is relevant. This European test standard is one of the following group of inter-related standards on test methods for determining dimensions and properties of thermal insulation materials and products, all of which fall within the scope of CEN/TC 88:  EN 822, Thermal insulating products for building applications — Determination of length and width  EN 823, Thermal insulating products for building applications — Determination of thickness  EN 824, Thermal insulating products for building applications — Determination of squareness  EN 825, Thermal insulating products for building applications — Determination of flatness  EN 826, Thermal insulating products for building applications — Determination of compression behaviour  EN 1602, Thermal insulating products for building applications — Determination of the apparent density  EN 1603, Thermal insulating products for building applications — Determination of dimensional stability under constant normal laboratory conditions (23 °C/50 % relative humidity)  EN 1604, Thermal insulating products for building applications — Determination of dimensional stability under specified temperature and humidity conditions  EN 1605, Thermal insulating products for building applications — Determination of deformation under specified compressive load and temperature conditions  EN 1606, Thermal insulating products for building applications — Determination of compressive creep SIST EN 12085:2013
...