EN 1605:2013
(Main)Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
This European Standard specifies the equipment and procedures for determining the deformation occurring under specified conditions of compressive load, temperature and time. It is applicable to thermal insulating products.
Wärmedämmstoffe für das Bauwesen - Bestimmung der Verformung bei definierter Druck- und Temperaturbeanspruchung
Diese Europäische Norm legt Prüfeinrichtungen und Verfahren zur Bestimmung der Verformung fest, die durch definierte Beanspruchungen hinsichtlich Druckbelastung, Temperatur und Zeit hervorgerufen wird. Sie gilt für Wärmedämmstoffe.
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la déformation sous charge en compression et conditions de température spécifiées
La présente Norme européenne spécifie l'équipement et les modes opératoires permettant de déterminer la déformation obtenue dans des conditions spécifiées de charge de compression, de température et de durée. Elle s’applique aux produits isolants thermiques.
Toplotnoizolacijski proizvodi za uporabo v gradbeništvu - Ugotavljanje deformacij pri predpisani tlačni obremenitvi in temperaturi
Ta evropski standard določa opremo in postopke za določanje deformacije, do katere pride pod določenimi pogoji tlačne napetosti, temperature in časa. Uporablja se za toplotnoizolacijske proizvode.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wärmedämmstoffe für das Bauwesen - Bestimmung der Verformung bei definierter Druck- und TemperaturbeanspruchungProduits isolants thermiques destinés aux applications du bâtiment - Détermination de la déformation sous charge en compression et conditions de température spécifiéesThermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions91.100.60Thermal and sound insulating materialsICS:Ta slovenski standard je istoveten z:EN 1605:2013SIST EN 1605:2013en,fr,de01-julij-2013SIST EN 1605:2013SLOVENSKI
STANDARDSIST EN 1605:1997/AC:1999SIST EN 1605:1997/A1:2007SIST EN 1605:19971DGRPHãþD
SIST EN 1605:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1605
March 2013 ICS 91.100.60 Supersedes EN 1605:1996English Version
Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions
Produits isolants thermiques destinés aux applications du bâtiment - Détermination de la déformation sous charge en compression et conditions de température spécifiées
Wärmedämmstoffe für das Bauwesen - Bestimmung der Verformung bei definierter Druck- und Temperaturbeanspruchung This European Standard was approved by CEN on 15 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1605:2013: ESIST EN 1605:2013
EN 1605:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Principle. 5 5 Apparatus . 5 6 Test specimens . 6 7 Procedure . 8 8 Calculation and expression of results . 9 9 Accuracy of measurement . 9 10 Test report . 10
SIST EN 1605:2013
EN 1605:2013 (E) 3 Foreword This document (EN 1605:2013) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2013, and conflicting national standards shall be withdrawn at the latest by September 2013. Attention is drawn to the possibility that some of the elements
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.