EN 16361:2013+A1:2016

Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation

This European Standard specifies requirements and test/assessment/calculation methods for external and internal power operated pedestrian doorsets, other than swing type, initially designed for installation with power operation.
Such doorset constructions may be operated electro-mechanically, electro-hydraulically or pneumatically.
These doorsets include power operated pedestrian sliding doorsets, revolving doorsets, balanced (sliding/swing) doorsets and folding doorsets with one or more horizontally moving leaves.
This European Standard applies to power operated pedestrian doorsets with flush or panelled leaves, complete with:
-   integral fanlights, if any;
NOTE 1   A fanlight is a panel over a door which is part of the doorset.
-   side panels that are contained within a single frame for inclusion in a single aperture, if any.
The intended uses of the products covered by this European Standard are:
-   doorsets for external use in escape routes and other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use in construction works;
-   doorsets for internal use in escape routes, communication and other declared specific uses and/or uses subject to other specific requirements, in particular noise and safety-in-use in construction works;
-   doorsets for internal use in escape routes, communication and other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy and safety-in-use in construction works.
The products covered by this European Standard are not assessed for structural applications of the building.
This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-2.
This European Standard does not apply to:
-   external pedestrian doorsets according to EN 14351-1;
-   internal pedestrian doorsets according to prEN 14351-2;
-   fire resistance and/or smoke control characteristics according to EN 16034;
-   lifts doorsets;
-   vehicles doorsets;
-   doorsets used in industrial processes;
-   doorsets in partition walls;
-   doorsets outside the reach of people (such as crane gantry fences);
-   turnstiles;
-   platform doorsets.
This European Standard does not cover special functions of doorsets (e.g. security, fire aspects in banks, airports, etc.).
This European Standard does not deal with any specific requirements on noise emitted from power operated doorsets, other than swing type, initially designed for installation with power operation as their noise emission is not considered to be a relevant hazard.
NOTE 2   Noise emission of power operated doorsets, other than swing type, initially designed for installation with power operation is not a significant hazard for the users of these products. It is a comfort aspect.

Kraftbetätigte Türen - Produktnorm, Leistungseigenschaften - Türsysteme, mit Ausnahme von Drehflügeltüren, vorgesehen für den kraftbetätigten Betrieb

Portes motorisées pour piétons - Norme de produit, caractéristiques de performance - Blocs-portes pour piétons, autres que de type battant, initialement conçus pour une installation avec un système de motorisation

Avtomatska vrata za prehod ljudi - Standard za proizvod, zahtevane lastnosti - Sestavi vrat za prehod ljudi, razen nihajnih vrat, najprej zasnovani za montažo s pogonom

Ta evropski standard določa zahteve ter preskusne metode, metode ocenjevanja in računske metode za zunanja in notranja avtomatska vrata za prehod ljudi, razen nihajnih vrat, najprej zasnovani za montažo s pogonom.
Takšna vrata se lahko upravljajo elektromehansko, elektrohidravlično ali pnevmatsko.
Vrste teh vhodnih vrat so avtomatična električna drsna vrata, vrteča se vrata, uravnotežena (drsna/nihajoča) vrata in zložljiva vrata z enim ali več vodoravno premikajočimi se krili.
Ta evropski standard se uporablja za avtomatska vrata za prehod ljudi z gladkimi ali panelnimi krili, vključno s:
– pahljačastimi okenci nad vrati, če obstajajo;
OPOMBA 1: pahljačasto okence je plošča nad vrati, ki je del sestava vrat.
– stranskimi ploščami, če obstajajo, ki so sestavni del enega okvirja za vključitev v eno odprtino.
Predvidena uporaba izdelkov v tem evropskem standardu je naslednja:
– sestavi vrat za zunanjo uporabo pri evakuacijskih poteh in drugi deklarirani specifični uporabi in/ali uporabi, ki je predmet drugih specifičnih zahtev, še posebej glede hrupa, energije, neprepustnosti in varne uporabe pri gradbenih objektih;
– sestavi vrat za notranjo uporabo pri evakuacijskih poteh, povezavah in drugi deklarirani specifični uporabi in/ali uporabi, ki je predmet drugih specifičnih zahtev, še posebej glede hrupa in varne uporabe pri gradbenih objektih;
– sestavi vrat za notranjo uporabo pri evakuacijskih poteh, povezavah in drugi deklarirani specifični uporabi in/ali uporabi, ki je predmet drugih specifičnih zahtev, še posebej glede hrupa, energije in varne uporabe pri gradbenih objektih.
Izdelki, ki so zajeti v tem evropskem standardu, niso ocenjeni za konstrukcijsko uporabo v stavbah.
Ta evropski standard ne zajema uporabe v okoljih, kjer so elektromagnetne motnje zunaj razpona, določenega v standardu EN 61000-6-2.
Ta evropski standard se ne uporablja za:
– zunanje sestave vrat za prehod ljudi v skladu s standardom EN 14351-1;
– notranje sestave vrat za prehod ljudi v skladu s standardom prEN 14351-2;
– lastnosti požarne odpornosti in/ali nadzora dima v skladu s standardom EN 16034;
– sestave vrat dvigal;
– sestave vrat vozil;
– sestave vrat, ki se uporabljajo v industrijskih procesih;
– sestave vrat v ločilnih stenah;
– sestave vrat na območjih izven dosega ljudi (npr. ograje portalnih žerjavov);
– vrtljive križe;
– avtomatski sestavi vrat na postajah.
Ta evropski standard ne zajema posebnih funkcij sestavov vrat (npr. varnost, požarni vidik v bankah, na letališčih itd.).
Ta evropski standard ne obravnava posebnih zahtev glede hrupa, ki ga oddajajo avtomatski sestavi vrat, ki niso nihajni in so bili najprej zasnovani za montažo s pogonom, saj se takšne emisije hrupa ne štejejo za ustrezno tveganje.
OPOMBA 2: hrup, ki ga oddajajo avtomatski sestavi vrat, ki niso nihajni in so bili najprej zasnovani za montažo s pogonom, ni resno tveganje za uporabnike teh izdelkov, temveč vidik udobja.

General Information

• Status: Published
• Publication Date: 12-Jul-2016
• ICS: 91.060.50 - Doors and windows
• Technical Committee: CEN/TC 33 - Doors, windows, shutters and building hardware
• Drafting Committee: CEN/TC 33/WG 9 - Powered Pedestian Doors (PPD)
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 22-Jun-2022
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Mandate: M/101 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on doors, windows and related products
• Ref Project: SIST EN 16361:2013+A1:2016 - Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation

Relations

• Merged From: EN 16361:2013 - Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation without resistance to fire and smoke leakage characteristics
• Effective Date: 16-Mar-2016
• Amended By: EN 16361:2013+A1:2016/prA2:2017 - Power operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation
• Effective Date: 04-Apr-2017
• Revised: prEN 16361 - Power operated pedestrian doorsets - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation
• Effective Date: 19-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Avtomatska vrata za prehod ljudi - Standard za proizvod, zahtevane lastnosti - Sestavi vrat za prehod ljudi, razen nihajnih vrat, najprej zasnovani za montažo s pogonomKraftbetätigte Türen - Produktnorm, Leistungseigenschaften - Türsysteme, mit Ausnahme von Drehflügeltüren, vorgesehen für den kraftbetätigten BetriebPortes motorisées pour piétons - Norme de produit, caractéristiques de performance - Blocs-portes pour piétons, autres que de type battant, initialement conçus pour une installation avec un système de motorisationPower operated pedestrian doors - Product standard, performance characteristics - Pedestrian doorsets, other than swing type, initially designed for installation with power operation91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 16361:2013+A1:2016SIST EN 16361:2013+A1:2016en,fr,de01-september-2016SIST EN 16361:2013+A1:2016SLOVENSKI
STANDARDSIST EN 16361:20131DGRPHãþD



SIST EN 16361:2013+A1:2016



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16361:2013+A1
July
t r s x ICS
{ sä r x rä w r Supersedes EN
s x u x sã t r s uEnglish Version
Power operated pedestrian doors æ Product standardá performance characteristics æ Pedestrian doorsetsá other than swing typeá initially designed for installation with power operation Portes motorisées pour piétons æ Norme de produitá caractéristiques de performance æ Blocsæportes pour piétonsá autres que de type battantá initialement conçus pour une installation avec un système de motorisation Kraftbetätigte Türen æ Produktnormá Leistungseigenschaften æ Türsystemeá mit Ausnahme von Drehflügeltürená vorgesehen für den kraftbetätigten Betrieb This European Standard was approved by CEN on
t x July
t r s u and includes Amendment
s approved by CEN on
v April
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s x u x sã t r s u ªA sã t r s x ESIST EN 16361:2013+A1:2016



EN 16361:2013+A1:2016 (E) 2 Contents Page European foreword . 4 1 Scope . 5 2 Normative references . 6 3 Terms and definitions . 7 4 Requirements . 7 4.1 General . 7 4.2 Rate of release of dangerous substances (only for indoor impact) . 8 4.3 Impact resistance (only for glazed doors with injury risks) . 8 4.4 Height . 8 4.5 Direct airborne sound insulation index (only for uses where acoustic performance is declared) . 8 4.6 Impact forces (safety in use) .
...