Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer

This part of this European Standard specifies a method for the determination of the thickness of ceramic coatings by measurement of the step height using a contact probe profilometer.
NOTE   An alternative measurement of thickness, using a crater grinding method, is specified in ENV 1071 2.

Hochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 1: Bestimmung der Schichtdicke mit einem Kontaktprofilometer

Céramiques techniques avancées - Méthodes d'essai pour revêtements céramiques - Partie 1: Détermination de l'épaisseur du revêtement par profilomètre à contact

La présente partie de cette Norme européenne spécifie une méthode permettant de déterminer l'épaisseur de revêtements céramiques par mesurage de la hauteur de décrochement à l'aide d'un profilomètre à contact.
NOTE   Une autre méthode de mesure de l'épaisseur, la méthode d'abrasion de la calotte sphérique, est spécifiée dans l'ENV 1071-2.

Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer

General Information

Status
Withdrawn
Publication Date
11-Mar-2003
Withdrawal Date
19-Apr-2016
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
20-Apr-2016

Relations

Buy Standard

Standard
EN 1071-1:2004
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometerHochleistungskeramik - Verfahren zur Prüfung keramischer Schichten - Teil 1: Bestimmung der Schichtdicke mit einem KontaktprofilometerCéramiques techniques avancées - Méthodes d'essai pour revetements céramiques - Partie 1: Détermination de l'épaisseur du revetement par profilometre a contactAdvanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer81.060.30Sodobna keramikaAdvanced ceramics25.220.99Druge obdelave in prevlekeOther treatments and coatingsICS:Ta slovenski standard je istoveten z:EN 1071-1:2003SIST EN 1071-1:2004en01-januar-2004SIST EN 1071-1:2004SLOVENSKI
STANDARDSIST ENV 1071-1:20001DGRPHãþD



SIST EN 1071-1:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1071-1March 2003ICS 81.060.30Supersedes ENV 1071-1:1993English versionAdvanced technical ceramics - Methods of test for ceramiccoatings - Part 1: Determination of coating thickness by contactprobe filometerCéramiques techniques avancées - Méthodes d'essai pourrevêtements céramiques - Partie 1: Détermination del'épaisseur du revêtement par profilomètre à contactHochleistungskeramik - Verfahren zur Prüfung keramischerSchichten - Teil 1: Bestimmung der Schichtdicke mit einemKontaktprofilometerThis European Standard was approved by CEN on 28 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1071-1:2003 ESIST EN 1071-1:2004



EN 1071-1:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Principle.44Apparatus.45Sampling and preparation of test specimens.56Procedure.57Limits to step height.68Repeatability.69Test report.6Annex A (informative)
Effect of amplification factor and leveling error on measured layerthickness.9Bibliography.12SIST EN 1071-1:2004



EN 1071-1:2003 (E)3ForewordThis document (EN 1071-1:2003) has been prepared by Technical Committee CEN/TC 184, "Advancedtechnical ceramics",
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.