EN 13630-10:2005

Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords

This European Standard specifies a method for determining the initiating capability of flexible plastic-coated detonating cords and flexible fibrous-overbraided detonating cords, for civil use. It applies only to those detonating cords, having a maximum grammage of 40 g/m, that are used to initiate another detonating cord or a high explosive.
NOTE   The limitations of this method are described in Annex B.

Explosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 10: Bestimmung der Zündfähigkeit von Sprengschnüren

Dieses Europäische Norm legt ein Verfahren zur Bestimmung der Zündfähigkeit von flexiblen
kunststoffummantelten und von flexiblen gewebeüberzogenen Sprengschnüren für zivile Zwecke fest. Es gilt
nur für Sprengschnüre mit einer längenbezogenen Höchstmasse von 40 g/m, die zur Detonationsübertragung
auf eine andere Sprengschnur oder einen Sprengstoff eingesetzt werden.
ANMERKUNG Die Grenzen dieses Verfahrens werden in Anhang B beschrieben.

Explosifs à usage civil - Cordeaux détonants et mèches de sûreté - Partie 10: Détermination de la capacité d'allumage des cordeaux détonants

La présente Norme européenne prescrit une méthode permettant de déterminer la capacité d’amorçage des
cordeaux détonants sous revêtement plastique souple et des cordeaux détonants à fibres tressées souples
destinés à un usage civil. Elle s’applique exclusivement aux cordeaux détonants, ayant un grammage
maximal de 40 g/m, utilisés pour amorcer un autre cordeau détonant ou un explosif.
NOTE Les limites de la présente méthode sont décrites en Annexe B.

Eksplozivi za civilno uporabo - Detonacijske in počasi goreče vžigalne vrvice - 10. del: Ugotavljanje sposobnosti detonacijskih vrvic za prenos vžiga

General Information

• Status: Published
• Publication Date: 17-May-2005
• Withdrawal Date: 29-Nov-2005
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 3 - Detonating cords, safety fuses and other fuses
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 20-Jan-2018
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Directive: 93/15/EEC - Council Directive 93/15/EEC of 5 April 1993 on the harmonization of the provisions relating to the placing on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Ref Project: SIST EN 13630-10:2005 - Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cords

Relations

• Revised: FprEN 13630-10 - Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of the index of initiating capability of detonating cords
• Effective Date: 10-Mar-2020

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Explosives for civil uses - Detonating cords and safety fuses - Part 10: Determination of initiating capability of detonating cordsExplosifs a usage civil - Cordeaux détonants et meches de sureté - Partie 10: Détermination de la capacité d'allumage des cordeaux détonantsExplosivstoffe für zivile Zwecke - Sprengschnüre und Sicherheitsanzündschnüre - Teil 10: Bestimmung der Zündfähigkeit von SprengschnürenTa slovenski standard je istoveten z:EN 13630-10:2005SIST EN 13630-10:2005en71.100.30Eksplozivi. PirotehnikaExplosives. PyrotechnicsICS:SLOVENSKI
STANDARDSIST EN 13630-10:200501-julij-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13630-10May 2005ICS 71.100.30English versionExplosives for civil uses - Detonating cords and safety fuses -Part 10: Determination of initiating capability of detonating cordsExplosifs à usage civil - Cordeaux détonants et mèches desûreté - Partie 10: Détermination de la capacité d'allumagedes cordeaux détonantsExplosivstoffe für zivile Zwecke - Sprengschnüre undSicherheitsanzündschnüre - Teil 10: Bestimmung derZündfähigkeit von SprengschnürenThis European Standard was approved by CEN on 25 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13630-10:2005: E

Range of applicability of the test method.7 Annex B (informative)
Restriction of the test method.8 Annex ZA (informative)
Clauses of this European Standard addressing essential requirements or other provisions of EU Directives.9

Part 1: Requirements EN 13630-2
Part 2: Determination of thermal stability of detonating cords and safety fuses EN 13630-3
Part 3: Determination of sensitiveness to friction of the core of detonating cords EN 13630-4
Part 4: Determination of sensitiveness to impact of detonating cords EN 13630-5
Part 5: Determination of resistance to abrasion of detonating cords EN 13630-6
Part 6: Determination of resistance to tension of detonating cords EN 13630-7
Part 7: Determination of reliability of initiation of detonating cords EN 13630-8
Part 8: Determination of resistance to water of detonating cords and safety fuses EN 13630-9
Part 9: Determination of transmission of detonation from detonating cord to detonating cord EN 13630-11
Part 11: Determination of velocity of detonation of detonating cords EN 13630-12
Part 12: Determination of burning duration of safety fuses According to the CEN/CENELEC Internal Regulations
...