EN 10305-4:2003

Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems

This European Standard specifies the technical delivery conditions for seamless cold drawn steel tubes of circular cross section used in hydraulic and pneumatic power systems.
Tubes according to European are characterized by having precisely defined tolerances on dimensions and a specified surface roughness.
The allowed pressure rates and temperatures are the responsibility of the customer in accordance with the state of the art and in application of the safety coefficients specified in the applicable regulations, codes or standards.

Präzisionsstahlrohre - Technische Lieferbedingungen - Teil 4: Nahtlose kaltgezogene Rohre für Hydraulik- und Pneumatik-Druckleitungen

Dieser Teil der EN 10305 enthält die technischen Lieferbedingungen für nahtlose kaltgezogene Präzisionsrohre aus Stahl mit kreisförmigem Querschnitt für die Anwendung in hydraulischen und pneumatischen Druckleitungssystemen.
Rohre nach diesem Teil der EN 10305 sind durch genau definierte Grenzabmaße und eine festgelegte Ober-flächenrauheit charakterisiert.
Die Beachtung der zulässigen Druckbeaufschlagung und Temperaturen nach dem Stand der Technik und unter Anwendung der in den entsprechenden Vorschriften, Regelwerken oder Normen festgelegten Sicherheits-koeffizienten liegt in der Verantwortung des Anwenders.

Tubes de précision en acier - Conditions techniques de livraison - Partie 4 : Tubes sans soudure étirés à froid pour circuits hydrauliques et pneumatiques

La présente partie de l'EN 10305 spécifie les conditions techniques de livraison pour les tubes sans soudure en acier, étirés à froid, de section circulaire, utilisés dans les circuits hydrauliques et pneumatiques.
Les tubes conformes à la présente partie de l'EN 10305 se caractérisent par des tolérances dimensionnelles précises et par une rugosité spécifiée.
Les taux de pression et les températures autorisés relèvent de la responsabilité du client conformément aux règles de l'art et en application des coefficients de sécurité spécifiés dans les réglementations, codes ou normes applicables.

Jeklene cevi za precizno uporabo – Tehnični dobavni pogoji – 4. del: Hladnovlečene nevarjene cevi za hidravlične in pnevmatične tlačne vode

General Information

• Status: Withdrawn
• Publication Date: 22-Apr-2003
• Withdrawal Date: 25-Jan-2011
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 11/WG 3 - Tubes for precision applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 26-Jan-2011
• Completion Date: 26-Jan-2011
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10305-4:2003 - Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems

Relations

• Replaced By: EN 10305-4:2011 - Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
• Effective Date: 29-Jan-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systemsHOTubes de précision en acier - Conditions techniques de livraison - Partie 4 : Tubes sans soudure étirés a froid pour circuits hydrauliques et pneumatiquesPräzisionsstahlrohre - Technische Lieferbedingungen - Teil 4: Nahtlose kaltgezogene Rohre für Hydraulik- und Pneumatik-DruckleitungenTa slovenski standard je istoveten z:EN 10305-4:2003SIST EN 10305-4:2003en77.140.75ICS:SLOVENSKI
STANDARDSIST EN 10305-4:200301-november-2003

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10305-4April 2003ICS 77.140.75English versionSteel tubes for precision applications - Technical deliveryconditions - Part 4: Seamless cold drawn tubes for hydraulic andpneumatic power systemsTubes en acier pour applications de précision - Conditionstechniques de livraison - Tubes sans soudure étirés à froidpour circuits hydrauliques et pneumatiquesPräzisionsstahlrohre - Technische Lieferbedingungen - Teil4: Nahtlose kaltgezone Rohre für Hydraulik- undPneumatik-DruckleitungenThis European Standard was approved by CEN on 28 February 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10305-4:2003 E

Clauses of this European Standard addressing essential requirements or otherprovisions of EU Directives.20Bibliography.21

1)In preparation, until this document is published as a European Standard a corresponding national standard should beagreed at the time of enquiry and order.

E
...