EN ISO 9665:2000

Adhesives - Animal glues - Methods of sampling and testing (ISO 9665:1998)

Klebstoffe - Tierleime - Verfahren für Probenahme und Prüfung (ISO 9665:1998)

Diese Internationale Norm legt Verfahren zur Probenahme und Prüfung von Knochen- und Hautleimen in Pulver-, Granulat-, Perl- oder Würfelform fest. ANMERKUNG 1: Diese Verfahren lassen sich bei geeigneter Umrechnung des entsprechenden Leimtrockengehalts auch bei Tierleimen anderer Form anwenden. Zur Präzision der in dieser Internationalen Norm beschriebenen Prüfverfahren sind gegenwärtig keine Aussagen möglich, da Ergebnisse mit Beteiligung mehrerer Laboratorien nicht vorliegen. Wenn derartige Ergebnisse
verfügbar sind, werden bei der nächsten Überprüfung dieser Norm Angaben zur Präzision in die entsprechenden Prüfverfahren aufgenommen. ANMERKUNG 2: Einzelheiten zur Angabe der Präzision sind ISO 5725-1 : 1994 "Accuracy (trueness and
precision) of measurement methods and results - Part 1: General principles and definitions" zu entnehmen.

Adhésifs - Colles d'origine animale - Méthodes d'échantillonnage et d'essai (ISO 9665:1998)

La présente Norme internationale prescrit des méthodes applicables à l'échantillonnage et à l'essai des colles à base d'os et de peau se présentant sous forme de poudres, granulés, de perles ou de cubes.  
NOTE 1 Ces méthodes peuvent être étendues pour tester d'autres formes de colles animales avec un calcul adéquat de la teneur en colle sèche équivalente.  La fidélité de méthodes d'essai ci-après n'est pas connue parce que des données interlaboratoires ne sont pas disponibles. Lorsque des données interlaboratoires seront obtenues, des déclarations de la fidélité seront ajoutées aux méthodes d'essai correspondantes lors de la prochaine révision.  
NOTE 2 Au sujet de la fidélité, il convient de se référer à l'ISO 5725-1:1994, Exactitude (justesse et fidélité) des résultats et méthodes de mesure - Partie 1: Principes généraux et définitions.

Lepila - Lepila živalskega izvora - Metode vzorčenja in preskušanja (ISO 9665:1998)

General Information

• Status: Published
• Publication Date: 18-Jul-2000
• ICS: 83.180 - Adhesives
• Technical Committee: CEN/TC 193 - Adhesives
• Drafting Committee: CEN/TC 193/WG 1 - General terminology - General physical and chemical tests
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 22-Jan-2007
• Completion Date: 22-Jan-2007
• Ref Project: SIST EN ISO 9665:2001 - Adhesives - Animal glues - Methods of sampling and testing (ISO 9665:1998)

Relations

• Replaces: EN ISO 9665:1995 - Adhesives - Animal glues - Methods for sampling and testing (ISO 9665:1993)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9665:2001
01-junij-2001
1DGRPHãþD
SIST EN ISO 9665:1998
/HSLOD/HSLODåLYDOVNHJDL]YRUD0HWRGHY]RUþHQMDLQSUHVNXãDQMD,62
Adhesives - Animal glues - Methods of sampling and testing (ISO 9665:1998)
Klebstoffe - Tierleime - Verfahren für Probenahme und Prüfung (ISO 9665:1998)
Adhésifs - Colles d'origine animale - Méthodes d'échantillonnage et d'essai (ISO
9665:1998)
Ta slovenski standard je istoveten z: EN ISO 9665:2000
ICS:
83.180 Lepila Adhesives
SIST EN ISO 9665:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9665:2001

---------------------- Page: 2 ----------------------

SIST EN ISO 9665:2001

---------------------- Page: 3 ----------------------

SIST EN ISO 9665:2001

---------------------- Page: 4 ----------------------

SIST EN ISO 9665:2001
INTERNATIONAL ISO
STANDARD 9665
Second edition
1998-09-15
Adhesives — Animal glues — Methods
of sampling and testing
Adhésifs — Colles d’origine animale — Méthodes d’échantillonnage
et d’essai
A
Reference number
ISO 9665:1998(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 9665:2001
ISO 9665:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national standards bodies (ISO member bodies). The work of
preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which
a technical committee has been established has the right to be represented
on that committee. International organizations, governmental and non-
governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 9665 was prepared by Technical Committee
ISO/TC 61, Plastics, Subcommittee SC 11, Products.
This second edition cancels and replaces the first edition (ISO 9665:1993),
annex A of which has been updated.
Annex A of this International Standard is for information only.
©  ISO 1998
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet [e-mail]
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 9665:2001
©
ISO ISO 9665:1998(E)
Introduction
The physical and chemical properties of animal glue depend firstly on the
nature of the raw material and secondly on the methods of processing. It is
not possible to develop any simple tests that will evaluate completely the
quality of a glue, or its suitability for a particular use. If, however, the glue is
made from a specific type of raw material by a usual method of
manufacture, then the following tests provide indications of the behaviour
of the glue in use, and may be taken as reliable criteria of quality.
Amongst these properties, the gel strength or viscosity, or both, are usually
included as general indices of quality. The foam test is of interest when the
glue is to be applied by special machines. Many of the physical tests (e.g.
gel strength, water absorption, foam) are of an empirical character, but if
the methods are carefully followed consistent results are obtainable which
will provide useful information both to the manufacturer and user.
Small samples of glue rapidly change their moisture content in response to
changes in atmospheric humidity. It is essential to keep the moisture
content of samples unchanged after they are taken. The use of sealed
waterproof storage containers is recommended for this purpose.
If a consignment undergoes long delays in transit, the average moisture
content may change between the times of sampling by producer and
consumer. To avoid this problem causing unnecessary disputes, it is
recommended that, when gel strengths or viscosities are reported, the
results of moisture content tests should also be given, if an accurate
comparison is required. Although the remaining tests listed in table 1 may
also be slightly affected by changes in moisture content, the differences
are not significant and it is not necessary to report moisture contents for
them.
iii

---------------------- Page: 7 ----------------------

SIST EN ISO 9665:2001

---------------------- Page: 8 ----------------------

SIST EN ISO 9665:2001
©
INTERNATIONAL STANDARD  ISO I
...