EN ISO 1874-2:2006

Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2006)

ISO 1874-2:2006 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of polyamide moulding and extrusion materials. Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given.
Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given. Properties and test methods that are suitable and necessary to characterize polyamide moulding and extrusion materials are listed.

Kunststoffe - Polyamid (PA)-Formmassen für das Spritzgießen und die Extrusion - Teil 2: Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 1874-2:2006)

Dieser Teil von ISO 1874 legt die Verfahren zur Herstellung von Probekörpern und die zur Bestimmung der Eigenschaften von Polyamid-Formmassen für das Spritzgießen und die Extrusion anzuwendenden Prüf¬verfahren fest. Anforderungen an die Behandlung des Probematerials und an das Konditionieren des Probe¬materials vor der Herstellung der Probekörper und der Probekörper vor der Prüfung sind ebenfalls enthalten.
Verfahren und Bedingungen für die Herstellung der Probekörper und Verfahren für die Bestimmung der Eigenschaften der Formmassen, aus denen die Probekörper hergestellt werden, sind angegeben. Eigen¬schaften und Prüfverfahren, die anwendbar und notwendig sind, um Polyamid-Formmassen für das Spritz¬gießen und die Extrusion zu charakterisieren, sind aufgelistet.
Die Liste der Eigenschaften enthält zunächst allgemein gültige Prüfverfahren, wie sie in ISO 10350 1 festge¬legt sind. Andere weithin gebräuchliche Prüfverfahren oder solche von besonderer Bedeutung für diese Formmassen, wie die kennzeichnenden Eigenschaften aus Teil 1 dieser Norm (Viskositätszahl und Zug Elastizi¬tätsmodul), sind in diesen Teil von ISO 1874 aufgenommen.

Plastiques - Matériaux polyamides (PA) pour moulage et extrusion - Partie 2: Préparation des éprouvettes et détermination des propriétés (ISO 1874-2:2006)

L'ISO 1874-2:2006 spécifie les méthodes de préparation des éprouvettes et les méthodes d'essai à appliquer pour déterminer les propriétés des matériaux polyamides pour moulage et extrusion. Elle indique les exigences requises lors de la manipulation du matériau d'essai, ainsi que lors de conditionnement dudit matériau avant moulage et des éprouvettes avant l'essai.
L'ISO 1874-2:2006 précise les modes opératoires et les conditions nécessaires à la préparation des éprouvettes, ainsi que les modes opératoires de mesure des propriétés des matériaux à partir desquels ces éprouvettes sont fabriquées. Elle fournit également une liste des propriétés et des méthodes d'essai appropriées et nécessaires à la caractérisation des matériaux polyamides pour moulage et extrusion.

Polimerni materiali - Poliamidni materiali (PA) za oblikovanje in ekstrudiranje - 2. del: Priprava preskušancev in ugotavljanje lastnosti (ISO 1874-2:2006)

Ta del standarda ISO 1874 določa metode za pripravo preskušancev in preskusnih metod za uporabo pri ugotavljanju lastnosti poliamidnih materialov za oblikovanje in ekstrudiranje. Podane so zahteve za ravnanje s preskusnimi materiali in obdelavo preskusnega materiala pred oblikovanjem ter preskušancev pred preskusom. Podani so postopki in pogoji za pripravo preskušancev ter postopki za merjenje lastnosti materialov, iz katerih so preskušanci izdelani. Navedene so lastnosti in preskusne metode, ki so primerne in nujne za opredelitev poliamidnih materialov za oblikovanje in ekstrudiranje. Lastnosti so bile izbrane na podlagi splošnih preskusnih metod iz standarda ISO 10350-1. Druge preskusne metode, ki se splošno uporabljajo ali so posebej pomembne za te materiale za oblikovanje in ekstrudiranje, so prav tako vključene v ta del standarda ISO 1874. Vključene so tudi označevalne lastnosti, ki so navedene v standardu ISO 1874-1 (viskoznostno število in natezni modul elastičnosti).

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2006
• Withdrawal Date: 14-Nov-2012
• ICS: 83.080.20 - Thermoplastic materials
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Nov-2012
• Completion Date: 15-Nov-2012
• Ref Project: SIST EN ISO 1874-2:2007 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2006)

Relations

• Replaces: EN ISO 1874-2:1995 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:1995)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 1874-2:2012 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1874-2:2012)
• Effective Date: 28-Nov-2012
• Amended By: EN ISO 1874-2:2006/A1:2010 - Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties - Amendment 1: Laser sintering of specimens (ISO 1874-2:2006/Amd 1:2010)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1874-2:2007
01-april-2007
1DGRPHãþD
SIST EN ISO 1874-2:1999
Polimerni materiali - Poliamidni materiali (PA) za oblikovanje in ekstrudiranje - 2.
del: Priprava preskušancev in ugotavljanje lastnosti (ISO 1874-2:2006)
Plastics - Polyamide (PA) moulding and extrusion materials - Part 2: Preparation of test
specimens and determination of properties (ISO 1874-2:2006)
Kunststoffe - Polyamid (PA)-Formmassen für das Spritzgießen und die Extrusion - Teil 2:
Herstellung von Probekörpern und Bestimmung von Eigenschaften (ISO 1874-2:2006)
Plastiques - Matériaux polyamides (PA) pour moulage et extrusion - Partie 2: Préparation
des éprouvettes et détermination des propriétés (ISO 1874-2:2006)
Ta slovenski standard je istoveten z: EN ISO 1874-2:2006
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 1874-2:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 1874-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 83.080.20 Supersedes EN ISO 1874-2:1995
English Version
Plastics - Polyamide (PA) moulding and extrusion materials -
Part 2: Preparation of test specimens and determination of
properties (ISO 1874-2:2006)
Plastiques - Matériaux polyamides (PA) pour moulage et Kunststoffe - Polyamid (PA)-Formmassen für das
extrusion - Partie 2: Préparation des éprouvettes et Spritzgießen und die Extrusion - Teil 2: Herstellung von
détermination des propriétés (ISO 1874-2:2006) Probekörpern und Bestimmung von Eigenschaften (ISO
1874-2:2006)
This European Standard was approved by CEN on 8 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1874-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 1874-2:2006 (E)





Foreword


This document (EN ISO 1874-2:2006) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by IBN.

This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2007, and conflicting national
standards shall be withdrawn at the latest by June 2007.

This document supersedes EN ISO 1874-2:1995.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 1874-2:2006 has been approved by CEN as EN ISO 1874-2:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------

INTERNATIONAL ISO
STANDARD 1874-2
Third edition
2006-12-01


Plastics — Polyamide (PA) moulding
and extrusion materials —
Part 2:
Preparation of test specimens
and determination of properties
Plastiques — Matériaux polyamides (PA) pour moulage et extrusion —
Partie 2: Préparation des éprouvettes et détermination des propriétés





Reference number
ISO 1874-2:2006(E)
©
ISO 2006

---------------------- Page: 4 ----------------------

ISO 1874-2:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. I
...