Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO 1265:2007)

ISO 1265:2007 specifies a method for determining the number of impurities and foreign particles in a flattened surface of poly(vinyl chloride) resin. It is not applicable to paste resins because of their finely divided state.

Kunststoffe - Vinylchlorid-Polymerisate - Bestimmung der Anzahl von Verunreinigungen und Fremdpartikeln (ISO 1265:2007)

Diese Internationale Norm legt ein Verfahren zur Bestimmung der Anzahl von Verunreinigungen und Fremd¬partikeln auf einer geebneten Oberfläche eines Vinylchlorid-Polymerisates fest. Wegen der Feinpulvrigkeit von Pasten-Polymerisaten (Harzpasten) ist es auf diese nicht anwendbar.

Plastiques - Résines de poly(chlorure de vinyle) - Détermination du nombre d'impuretés et de corps étrangers (ISO 1265:2007)

L'ISO 1265:2007 spécifie une méthode de détermination du nombre d'impuretés et de corps étrangers présents dans une surface écrasée de résine de polychlorure de vinyle. Elle n'est pas applicable aux résines pour pâtes, du fait de leur très grande finesse.

Polimerni materiali - Polivinilklorid - Določanje števila nečistoč in tujkov (ISO 1265:2007)

General Information

Status
Published
Publication Date
31-Jan-2007
Technical Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
01-Feb-2007
Completion Date
01-Feb-2007

RELATIONS

Buy Standard

Standard
EN ISO 1265:2007
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day
Draft
prEN ISO 1265:2004
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 1265:2007
01-september-2007
1DGRPHãþD
SIST EN ISO 1265:2000

3ROLPHUQLPDWHULDOL3ROLYLQLONORULG'RORþDQMHãWHYLODQHþLVWRþLQWXMNRY ,62



Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign

particles (ISO 1265:2007)

Kunststoffe - Vinylchlorid-Polymerisate - Bestimmung der Anzahl von Verunreinigungen

und Fremdpartikeln (ISO 1265:2007)

Plastiques - Résines de poly(chlorure de vinyle) - Détermination du nombre d'impuretés

et de corps étrangers (ISO 1265:2007)
Ta slovenski standard je istoveten z: EN ISO 1265:2007
ICS:
83.080.20 Plastomeri Thermoplastic materials
SIST EN ISO 1265:2007 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 1265
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2007
ICS 83.080.20
English Version
Plastics - Poly(vinyl chloride) resins - Determination of number
of impurities and foreign particles (ISO 1265:2007)

Plastiques - Résines de poly(chlorure de vinyle) - Kunststoffe - Vinylchlorid-Polymerisate - Bestimmung der

Détermination du nombre d'impuretés et de corps étrangers Anzahl von Verunreinigungen und Fremdpartikeln (ISO

(ISO 1265:2007) 1265:2007)
This European Standard was approved by CEN on 29 December 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the

official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,

France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1265:2007: E

worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 1265:2007 (E)
Foreword

This document (EN ISO 1265:2007) has been prepared by Technical Committee ISO/TC 61

"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of

which is held by IBN/BIN.

This European Standard shall be given the status of a national standard, either by publication of

an identical text or by endorsement, at the latest by August 2007, and conflicting national

standards shall be withdrawn at the latest by August 2007.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of

the following countries are bound to implement this European Standard: Austria, Belgium,

Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United

Kingdom.
Endorsement notice

The text of ISO 1265:2007 has been approved by CEN as EN ISO 1265:2007 without any

modifications.
---------------------- Page: 3 ----------------------
INTERNATIONAL ISO
STANDARD 1265
Second edition
2007-02-01
Plastics — Poly(vinyl chloride) resins —
Determination of number of impurities
and foreign particles
Plastiques — Résines de poly(chlorure de vinyle) — Détermination du
nombre d'impuretés et de corps étrangers
Reference number
ISO 1265:2007(E)
ISO 2007
---------------------- Page: 4 ----------------------
ISO 1265:2007(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but

shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In

the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2007

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2007 – All rights reserved
---------------------- Page: 5 ----------------------
ISO 1265:2007(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the

International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 1265 was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 9, Thermoplastic

materials.

This second edition cancels and replaces the first edition (ISO 1265:1979), which has been technically revised.

© ISO 2007 – All rights reserved iii
---------------------- Page: 6 ----------------------
ISO 1265:2007(E)
Intro
...

OSIST prEN ISO 1265:2004SLOVENSKIoct 2004

PREDSTANDARDPlastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO/DIS 1265:2004)©

Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaOSIST prEN ISO 1265:2004(en;fr;de)ICS83.080.20

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
DRAFT prEN ISO 1265
June 2004 ICS
Will supersede EN ISO 1265:1997 English version

Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles (ISO/DIS 1265:2004)

Plastiques - Résines de poly(chlorure de vinyle) - Détermination du nombre d'impuretés et de corps étrangers (ISO/DIS 1265:2004)

This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 249.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36

B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. prEN ISO 1265:2004: E

prEN ISO 1265:2004 (E)
Foreword

This document (prEN ISO 1265:2004) has been prepared by Technical Committee ISO/TC 61 "Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by IBN.

This document is currently submitted to the parallel Enquiry.
This document will supersede EN ISO 1265:1997.
Endorsement notice

The text of ISO 1265:2004 has been approved by CEN as prEN ISO 1265:2004 without any modifications.

THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BEREFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFTINTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TOWHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.DRAFT INTERNATIONAL STANDARDISO/DIS1265© International Organization for Standardization,2004INTERNATIONALORGANIZATIONFORSTANDARDIZATION••ORGANISATIONINTERNATIONALEDENORMALISATIONISO/TC61/SC9Voting begins on:2004-06-10Secretariat: ANSIVoting terminates on:2004-11-10Plastics— Poly(vinyl chloride) resins— Determination of number of impurities and foreign particlesPlastiques— Résines de poly(chlorure de vinyle)— Détermination du nombre d'impuretés et de corps étrangers[Revision of first edition (ISO1265:1979)]ICS83.080.20

ISO/CEN PARALLEL ENQUIRYThe CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subjectof interest to European standardization. In accordance with the ISO-lead mode of collaboration asdefined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CENmembers as would a CEN enquiry on a draft European Standard. Should this draft be accepted, afinal draft, established on the basis of comments received, will be submitted to a parallel two-month FDISvote in ISO and formal vote in CEN.In accordance with the provisions of Council Resolution 15/1993 this document is circulated inthe English language only.Conformément aux dispositions de la Résolution du Conseil 15/1993, ce document est distribuéen version anglaise seulement.To expedite distribution, this document is circulated as received from the committee secretariat.ISO Central Secretariat work of editing and text composition will be undertaken at publicationstage.Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu dusecrétariat du comité. Le travail de rédaction et de composition de texte sera effectué auSecrétariat central de l'ISO au stade de publication.

ISO/DIS1265ii© ISO2004–All rights reservedPDF disclaimerThis PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shallnot be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. Indownloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariataccepts no liability in this area.Adobe is a trademark of Adobe Systems Incorporated.Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creationparameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In theunlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.Copyright noticeThis ISO document is a Draft International Standard and is copyright-protected by ISO. Except as permittedunder the applicable laws of the user's country, neither this ISO draft nor any extract from it may bereproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying,recording or otherwise, without prior written permission being secured.Requests for permission to reproduce should be addressed to either ISO at the address below or ISO'smember body in the country of the requester.ISO copyright officeCase postale 56  CH-1211 Geneva 20Tel.+ 41 22 749 01 11Fax+ 41 22 749 09 47E-mailcopyright@iso.orgWebwww.iso.orgReproduction may be subject to royalty payments or a licensing agreement.Violators may be prosecuted.

ISO/DIS 1265 © ISO 2004 – All rights reservediiiContentsPage1 Scope...........................................................................................................................................................1 2 Principle.......................................................................................................................................................1 3 Apparatus....................................................................................................................................................1 4 Procedure....................................................................................................................................................1 5 Expression of results..................................................................................................................................2 6 Test report...................................................................................................................................................3

ISO/DIS 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.