EN 424:2001

Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg

This European Standard specifies a method for determining the resistance of an installed resilient floor covering to the mechanical stress resulting from the simulated movement of a furniture leg.

Elastische Bodenbeläge - Bestimmung des Verhaltens bei der Simulation des Verschiebens eines Möbelfußes

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Widerstandsfähigkeit eines verlegten elastischen Bodenbelags gegen die mechanische Beanspruchung fest, die sich aus der Verschiebung eines Möbelfußes ergibt.

Revêtements de sol résilients - Détermination de l'action du déplacement simulé d'un pied de meuble

La présente Norme européenne spécifie une méthode pour déterminer la résistance d'un revêtement de sol résilient installé aux efforts mécaniques dus au déplacement simulé d'un pied de meuble.

Netekstilne talne obloge - Ugotavljanje učinka simuliranega premikanja noge pohištva

General Information

• Status: Withdrawn
• Publication Date: 11-Dec-2001
• Withdrawal Date: 04-Jun-2019
• ICS: 97.150 - Floor coverings
• Technical Committee: CEN/TC 134 - Resilient and textile floor coverings
• Drafting Committee: CEN/TC 134 - Resilient and textile floor coverings
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 05-Jun-2019
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 424:2002 - Resilient floor coverings - Determination of the effect of simulated movement of a furniture leg

Relations

• Replaces: EN 424:1993 - Resilient floor coverings - Determination of the effect of the simulated movement of a furniture leg
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 16581:2019 - Resilient and laminate floor coverings - Determination of the effect of simulated movement of a furniture leg (ISO 16581:2014)
• Effective Date: 12-Jun-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2002
1DGRPHãþD
SIST EN 424:1999
1HWHNVWLOQHWDOQHREORJH8JRWDYOMDQMHXþLQNDVLPXOLUDQHJDSUHPLNDQMDQRJH
SRKLãWYD
Resilient floor coverings - Determination of the effect of simulated movement of a
furniture leg
Elastische Bodenbeläge - Bestimmung des Verhaltens bei der Simulation des
Verschiebens eines Möbelfußes
Revetements de sol résilients - Détermination de l'action du déplacement simulé d'un
pied de meuble
Ta slovenski standard je istoveten z: EN 424:2001
ICS:
97.150 Netekstilne talne obloge Non-textile floor coverings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 424
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 97.150 Supersedes EN 424:1993
English version
Resilient floor coverings - Determination of the effect of
simulated movement of a furniture leg
Revêtements de sol résilients - Détermination de l'action du Elastische Bodenbeläge - Bestimmung des Verhaltens bei
déplacement simulé d'un pied de meuble einer nachgeahmten Verschiebung eines Möbelfußes
This European Standard was approved by CEN on 15 November 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 424:2001 E
worldwide for CEN national Members.

Foreword
This European Standard has been prepared by Technical Committee CEN/TC 134 "Resilient and textile floor
coverings", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by June 2002, and conflicting national standards shall be withdrawn at the latest by
June 2002.
This European Standard supersedes EN 424:1993.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
1 Scope
This European Standard specifies a method for determining the resistance of an installed resilient floor covering to
the mechanical stress resulting from the simulated movement of a furniture leg.
2 Principle
The resistance of an installed floor covering to the movement of a furniture leg with rounded edges and different
loadings is assessed for deterioration in surface flatness, surface damage, cuts of varying depths and penetrating
edges.
3 Apparatus (see Figures 1 to 3)
3.1 A frame, comprising two guide rails fixed relative to the test piece supporting the motor and the control
capstan, diameter 100 mm. The unladen peripheral speed shall be 300 mm/s.
3.2 A carriage, supported and guided by rails and having a wheel base designed
...