iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12531:1998

(Main)

Castors and wheels - Hospital Bed Castors

Castors and wheels - Hospital Bed Castors

This European standard specifies the technical requirements, the appropriate dimensions and the requirements for testing. This European standard applies to swivel castors for hospital beds with a wheel diameter of 100 mm or more, which have a central locking device. Swivel castors may be used with the main principal dimensions.

Räder und Rollen - Krankenbettenrollen

Diese Europäische Norm legt die technischen Anforderungen, die geeigneten Abmessungen und die Anforderungen für die Prüfungen fest. Diese Europäische Norm gilt für Lenkrollen für Krankenbetten mit einem Raddurchmesser von 100 mm oder mehr, einschließlich Zentralfeststeller. Andere Lenkrollen mit vergleichbaren Abmessungen können ebenfalls angewendet werden.

Roues et roulettes - Roulettes pour lits d'hôpitaux

La présente norme européenne spécifie les prescriptions techniques, les dimensions appropriées et les prescriptions pour la réalisation des essais. La présente norme européenne s'applique aux roues et roulettes pivotantes pour lits d'hôpitaux avec un diamètre de roue supérieur ou égal à 100 mm, qui ont un système de blocage central. Les roulettes pivotantes peuvent être utilisées avec les dimensions principales courantes.

Castors and wheels - Hospital Bed Castors

General Information

Status
Published
Publication Date
22-Sep-1998
Withdrawal Date
30-Mar-1999
ICS
11.140 - Hospital equipment
Technical Committee
CEN/TC 324 - Castors and wheels
Drafting Committee
CEN/TC 324 - Castors and wheels
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
15-Jun-2022
Ref Project
SIST EN 12531:2000 - Castors and wheels - Hospital Bed Castors

Buy Standard

EN 12531:2000EN 12531:2000
PreviousNext
Standard
EN 12531:2000
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Castors and wheels - Hospital Bed CastorsRäder und Rollen - KrankenbettenrollenRoues et roulettes - Roulettes pour lits d'hôpitauxCastors and wheels - Hospital Bed Castors11.140Oprema bolnišnicHospital equipmentICS:Ta slovenski standard je istoveten z:EN 12
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 455-1:2020+A2:2024(Main + Amendment)
Medical gloves for single use - Part 1: Requirements and testing for freedom of holes
SIST EN 455-1:2020+A2:2024

This document specifies requirements and gives the test method for medical gloves for single use in order to determine freedom from holes.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 455-2:2024(Main)
Medical gloves for single use - Part 2: Requirements and testing for physical properties
SIST EN 455-2:2024

This document specifies requirements and gives test methods for physical properties of single-use medical gloves (i.e. surgical gloves and examination/procedure gloves) in order to ensure that they provide and maintain in use an adequate level of protection from cross contamination for both patient and user.
This document does not specify the size of a lot. Attention is drawn to the difficulties that can be associated with the distribution and control of very large lots. The recommended maximum individual lot size for production is 500 000.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 455-3:2023(Main)
Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
SIST EN 455-3:2024

This part of EN 455 specifies requirements for the evaluation of biological safety for medical gloves for single use. It gives requirements for labelling and the disclosure of information relevant to the test methods used.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 14237:2021(Main)
Textiles for healthcare and social services facilities
SIST-TS CEN/TS 14237:2022

This document recommends characteristics, test methods and minimum performance specifications for unused textile for the healthcare and social service facilities (hospitals, residential care homes, etc.) to give guidance on the suitability of products intended to be maintained by industrial laundering.
This document is not applicable to surgical textiles under the Medical Devices Directive nor protective clothing under the PPE Directive.

  • Technical specification
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14683:2019+AC:2019(Main + Amendment)
Medical face masks - Requirements and test methods
SIST EN 14683:2019+AC:2019

This document specifies construction, design, performance requirements and test methods for medical face masks intended to limit the transmission of infective agents from staff to patients during surgical procedures and other medical settings with similar requirements. A medical face mask with an appropriate microbial barrier can also be effective in reducing the emission of infective agents from the nose and mouth of an asymptomatic carrier or a patient with clinical symptoms.
This European Standard is not applicable to masks intended exclusively for the personal protection of staff.
NOTE 1   Standards for masks for use as respiratory personal protective equipment are available.
NOTE 2   Annex A provides information for the users of medical face masks.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13795-2:2019(Main)
Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits
SIST EN 13795-2:2019

This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characteristics of single-use and reusable clean air suits used as medical devices for clinical staff, intended to prevent the transmission of infective agents between clinical staff and patients during surgical and other invasive procedures. This European Standard specifies test methods for evaluating the identified characteristics of clean air suits and sets performance requirements for these products.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13795-1:2019(Main)
Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns
SIST EN 13795-1:2019

This European Standard specifies information to be supplied to users and third party verifiers in addition to the usual labelling of medical devices (see EN 1041 and EN ISO 15223-1), concerning manufacturing and processing requirements. This European Standard gives information on the characteristics of single-use and reusable surgical gowns and surgical drapes used as medical devices for patients, clinical staff and equipment, intended to prevent the transmission of infective agents between clinical staff and patients during surgical and other invasive procedures. This European Standard specifies test methods for evaluating the identified characteristics of surgical drapes and gowns and sets performance requirements for these products.
EN 13795-1 does not cover requirements for resistance to penetration by laser radiation of products. Suitable test methods for resistance to penetration by laser radiation, together with an appropriate classification system, are given in EN ISO 11810.
EN 13795-1 does not cover requirements for incise drapes or films.
EN 13795-1 does not cover requirements for antimicrobial treatments for surgical gowns and drapes. Antimicrobial treatment may cause environmental risks such as resistance and pollution. However, antimicrobial treated surgical gowns and drapes fall under the scope of this standard with respect to their use as surgical gowns and drapes.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 16953:2017(Main)
Medical gloves for single use - Guidance for selection
SIST-TP CEN/TR 16953:2018

This Technical Report provides information for those choosing or using sterile and non-sterile gloves for medical applications based on a risk assessment. It deals with gloves worn primarily for the protection of the patient and glove user from biological cross contamination.
NOTE   Gloves worn specifically for the protection of the glove user from e.g. chemical and biological hazards are covered by the EU-Directive on Personal Protective Equipment (PPE) and the related standards e.g. EN 16523-1, EN 374-2, EN 374-4, EN ISO 374-1 and EN ISO 374-5.
This document describes the rationale behind the requirements of the EN 455 series and explores the possible trade-offs in glove selection between the various factors which affect glove, physical properties, biocompatibility, comfort and sensitivity. The strengths and weaknesses of various alternative glove materials and the potential biological hazards presented by their use are also explored.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11810:2015(Main)
Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015)
SIST EN ISO 11810:2016

ISO 11810:2015 is applicable to disposable and reusable, as well as woven and non-woven materials used as surgical drapes and other patient-protective covers which claim to be laser-resistant. The purpose of this International Standard is to provide a standardized method for testing and classifying surgical drapes and other patient-protective covers with respect to laser-induced hazards. An appropriate classification system is given. It is not the purpose of this International Standard to serve as a general fire safety specification, and as such, this International Standard does not cover other sources of ignition.
All materials reflect portions of the beam and it is necessary for the user to decide whether specular reflectance can be a hazard. This measurement, however, is not covered in this International Standard.
The test procedure can be used to assess the laser induced flammability properties of non-laser-resistant items
NOTE          Users of products tested by this method are cautioned that the laser resistance of a surgical drape and/or patient-protective cover will be wavelength sensitive and that a surgical drape and/or patient-protective cover are better tested at the wavelength for which it is intended to be used. If tested using other wavelengths, it is necessary to explicitly state the power settings and modes of delivery.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16442:2015(Main)
Controlled environment storage cabinet for processed thermolabile endoscopes
SIST EN 16442:2015

This European Standard specifies the performance requirements applying to cabinets designed to store, or store and dry, thermolabile endoscopes following automated or manual processing.
The storage cabinets are designed to provide a controlled environment for storage of endoscope(s), with or without channels, and when necessary drying of the endoscope(s), including the endoscope(s) channels.
The controlled environment provided by the storage cabinet ensures that during storage there is no deterioration of the microbiological quality of the endoscope. The drying function is intended to supplement, if necessary, any drying provided as part of the automated or manual processing cycle.
This European Standard specifies storage cabinets which flush the channels and the external surfaces of endoscopes with air.
NOTE 1   The storage cabinet is one of the means that can allow the safe use of the endoscope for an extended period from the time of processing and improve availability for emergency use.
NOTE 2   Thorough drying of an endoscope in a washer-disinfector can require a prolonged cycle time; the use of a storage cabinet including a drying function can enhance throughput of the endoscopes.
The cabinet is not intended to provide any cleaning or disinfection function.
This European Standard does not include the use of other chemicals for drying and maintaining the quality of endoscopes during storage

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day