EN 13765:2010+A1:2015

Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification

This European Standard specifies requirements for four types of thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies bore sizes from 25 mm to 300 mm, working pressures from 4 bar  to 14 bar and working temperatures from -30 °C to 150 °C.
Type 1 hoses are suitable for vapour applications. Types 2 to 4 hoses are suitable for liquid applications.
NOTE 1   The attention of users is drawn to Annex A concerning the selection of the material for the inner wall of layers and any polymeric coating of the internal wire helix related to the chemical(s) to be conveyed by the hoses and/or hose assemblies.
NOTE 2   The manufacturer should be consulted where a polymeric coated internal wire is being considered for use with low conductivity hydrocarbons or chemicals.
This European Standard does not apply to hoses and hose assemblies for:
Aircraft refuelling   (EN 1361);
Fuel dispensing   (EN 1360);
Oil burners   (EN ISO 6806);
Liquefied petroleum gas and liquefied natural gas   (EN 13766);
Fire fighting   (EN ISO 14775);
Offshore liquefied natural gas   (EN 1474-2);
Refrigeration circuits

Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation

Diese Europäische Norm legt Anforderungen für vier Typen thermoplastischer, mehrlagiger (nicht vulkani¬sierte) Schläuche und Schlauchleitungen zur Förderung von Kohlen¬wasserstoffen, Lösungsmitteln und Chemikalien fest. Sie legt Bohrungsdurchmesser von 25 mm bis 300 mm, Betriebsdrücke von 4 bar ) bis 14 bar und Betriebstemperaturen von -30 °C bis 150 °C fest.
Der Schlauchtyp 1 ist geeignet für die Anwendung mit Gas. Die Schlauchtypen 2 bis 4 sind für Anwendungen mit Flüssigkeit geeignet.
ANMERKUNG 1   Der Anwender wird auf Anhang A verwiesen, der die Werkstoffauswahl für die Innenwände der Lagen und der polymeren Überzüge der inneren Drahtwendel bezüglich der durch die Schläuche und/oder Schlauchleitungen zu fördernden Chemikalien betrifft.
ANMERKUNG 2   Wenn ein polymerbeschichteter Draht für die Anwendung mit schwach leitenden Kohlenwasserstoffen oder Chemikalien vorgesehen ist, sollte der Hersteller zurate gezogen werden.
Diese Europäische Norm gilt nicht für Schläuche und Schlauchleitungen für:
-   Flugzeugbetankung (EN 1361);
-   Zapfstellenschläuche (EN 1360);
-   Ölbrenner (EN ISO 6806);
-   Flüssiggas und Flüssigerdgas (EN 13766);
-   Feuerwehrschläuche (EN ISO 14775);
-   Offshore Flüssigerdgas (EN 1474 2);
-   Kühlkreisläufe.

Tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - Spécifications

La présente Norme européenne spécifie les exigences relatives à quatre types de tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) utilisés pour le transport d’hydrocarbures, de solvants et de produits chimiques. Elle spécifie des diamètres de passage compris entre 25 mm et 300 mm, des pressions de service comprises entre 4 bar 1)  et 14 bar et des températures d’utilisation comprises entre - 30 °C et 150 °C.
Les tuyaux de type 1 conviennent aux applications de la vapeur. Les tuyaux de types 2 à 4 conviennent à l’utilisation de liquides.
NOTE 1   L’attention des utilisateurs est attirée sur l’Annexe A concernant le choix du matériau du revêtement intérieur des couches et de tout revêtement polymère de l’hélice intérieure en contact avec le(s) produit(s) chimique(s) à transporter dans les tuyaux et/ou assemblages flexibles.
NOTE 2   Il convient de consulter le fabricant lorsque l’utilisation d’un fil interne avec revêtement polymère est prévue pour être en contact avec des produits chimiques ou des hydrocarbures de basse conductivité.
La présente Norme européenne ne s’applique pas aux tuyaux et aux assemblages flexibles destinés :
Au ravitaillement en carburant des avions   (EN 1361) ;
À la livraison de carburant   (EN 1360) ;
Aux brûleurs à mazout   (EN ISO 6806) ;
Aux gaz de pétrole liquéfiés et au gaz naturel liquéfié   (EN 13766) ;
À la lutte contre l’incendie   (EN ISO 14775) ;
Au gaz naturel liquéfié en mer   (EN 1474-2) ;
Aux circuits réfrigérants.

Plastomerne večslojne (nevulkanizirane) cevi in cevni priključki za pretok ogljikovodikov, topil in kemikalij - Specifikacija

Ta evropski standard določa zahteve za štiri vrste plastomernih večslojnih (nevulkaniziranih) cevi in cevnih priključkov za pretok ogljikovodikov, topil in kemikalij. Določa velikosti premera cevi od 25 mm do 300 mm, delovni tlak od 4 bar do 14 bar in delovno temperaturo od ˜–30 °C do 150 °C.
Cevi tipa 1 so primerne za uporabo s paro. Cevi tipa od 2 do 4 so primerne za uporabo s tekočino.
OPOMBA 1: Uporabnike je treba opozoriti na dodatek A, ki se nanaša na izbiro materiala za notranje sloje sten in morebitne polimerne prevleke notranje žične vijačnice v povezavi s kemikalijami, ki se bodo pretakale skozi cevi in/ali cevne priključke.
OPOMBA 2: Glede uporabe s polimeri prevlečene notranje žice skupaj z ogljikovodiki ali kemikalijami z nizko prevodnostjo se je treba posvetovati s proizvajalcem.
Ta evropski standard se ne uporablja za cevi in cevne priključke za:
točenje goriva v letala   (EN 1361);
točenje goriva   (EN 1360);
oljne gorilnike   (EN ISO 6806);
utekočinjeni naftni plin in utekočinjeni zemeljski plin   (EN 13766);
gasilstvo   (EN ISO 14775);
utekočinjeni zemeljski plin na morju   (EN 1474-2);
hladilne krogotoke.

General Information

• Status: Withdrawn
• Publication Date: 10-Mar-2015
• Withdrawal Date: 26-Jun-2018
• ICS: 23.040.70 - Hoses and hose assemblies
• Technical Committee: CEN/TC 218 - Rubber and plastics hoses and hose assemblies
• Drafting Committee: CEN/TC 218/WG 1 - Rubber and plastics hoses and hose assemblies for industrial, chemical and petrochemical applications
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 27-Jun-2018
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Ref Project: SIST EN 13765:2011+A1:2015 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification

Relations

• Merged From: EN 13765:2010/FprA1 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
• Effective Date: 18-Jan-2023
• Merged From: EN 13765:2010 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
• Effective Date: 10-Dec-2014
• Replaced By: EN 13765:2018 - Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
• Effective Date: 15-Jul-2018

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - SpezifikationTuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - SpécificationsThermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification83.140.40Gumene ceviHosesICS:Ta slovenski standard je istoveten z:EN 13765:2010+A1:2015SIST EN 13765:2011+A1:2015en,fr,de01-maj-2015SIST EN 13765:2011+A1:2015SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13765:2010+A1
March 2015 ICS 23.040.70 Supersedes EN 13765:2010English Version
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals - Specification
Tuyaux et assemblages flexibles thermoplastique multicouches (non vulcanisés) pour le dépotage d'hydrocarbures, solvants et produits chimiques - Spécifications
Thermoplastische, mehrlagige (nicht vulkanisierte) Schläuche und Schlauchleitungen für die Förderung von Kohlenwasserstoffen, Lösungsmitteln und Chemikalien - Spezifikation This European Standard was approved by CEN on 18 March 2010 and includes Amendment 1 approved by CEN on 27 December 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13765:2010+A1:2015 ESIST EN 13765:2011+A1:2015

Resistance to chemical(s) conveyed . 12 Annex B (normative)
Carbon steel wire . 13 B.1 Manufacture . 13 B.2 Condition of finished wire . 13 B.3 Properties . 14 Annex C (normative)
Galvanized zinc coating . 15 C.1 Adhesion of coating . 15 C.2 Minimum mass of coating . 15 Annex D (normative)
Method of test for crush recovery . 16 Annex E (normative)
Method of test for fuel resistance . 18 Annex F (normative)
Method of test for thermal ageing . 19 Annex G (normative)
Method of test for flammability . 20 Annex H (normative)
Sequence of hydrostatic tests . 22 Annex I (normative)
Method of test for fitting security . 23 Annex J (normative)
Method of test for leak tightness . 24 SIST EN 13765:2011+A1:2015

Type and routine tests for hoses and hose assemblies . 25 Annex L (informative)
Batch tests for hoses and hose assemblies . 26
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 590, Automotive fuels - Diesel - Requirements and test methods EN 10088-3:2005, Stainless steels — Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes !EN ISO 1043-1:2011, Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)" EN ISO 1402:2009, Rubber and plastics hoses and hose assemblies - Hydrostatic testing (ISO 1402:2009) EN ISO 2411, Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2000) EN ISO 4671, Rubber and plastics hoses and hose assemblies — Methods of measurement of dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007) EN ISO 4672, Rubber and plastics hoses — Sub-ambient temperature flexibility tests (ISO 4672:1997)
1)
1 bar = 0,1 MPa. SIST EN 13765:2011+A1:2015

Type 1 Type 2 Type 3 Type 4 Maximum working pressure (bar) 4 10 14 14 Proof pressure (bar) 6 15 21 21 Minimum burst pressure (bar) 16 40 56 56 Vacuum rating (bar) 0,5 0,9 0,9 0,9 Working temperature range (°C) − 20 to + 60=− 30 to + 80=− 30 to + 80=− 30 to + 150=NOTE 1 bar = 0,1 MPa. 5 Materials and construction 5.1 General Hoses shall be constructed as shown in Figure 1
...