EN 1010-2:2006/FprA1
(Amendment)Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von Druck- und Papierverarbeitungsmaschinen - Teil 2: Druck- und Lackiermaschinen einschließlich Maschinen der Druckvorstufe
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction de machines d'impression et de transformation du papier - Partie 2: Machines d'impression et de vernissage y compris les équipements de pré-press
Varnost strojev - Varnostne zahteve za načrtovanje in konstrukcijo tiskarskih strojev in strojev za obdelavo papirja - 2. del: Tiskarski in lakirni stroji, vključno s stroji za predtiskanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2010
9DUQRVWVWURMHY9DUQRVWQH]DKWHYH]DQDþUWRYDQMHLQNRQVWUXNFLMRWLVNDUVNLK
VWURMHYLQVWURMHY]DREGHODYRSDSLUMDGHO 7LVNDUVNLLQODNLUQLVWURMLYNOMXþQRV
VWURML]DSUHGWLVNDQMH
Safety of machinery - Safety requirements for the design and construction of printing and
paper converting machines - Part 2: Printing and varnishing machines including pre-
press machinery
Sicherheit von Maschinen - Sicherheitsanforderungen an Konstruktion und Bau von
Druck- und Papierverarbeitungsmaschinen - Teil 2: Druck- und Lackiermaschinen
einschließlich Maschinen der Druckvorstufe
Sécurité des machines - Prescriptions de sécurité pour la conception et la construction
de machines d'impression et de transformation du papier - Partie 2: Machines
d'impression et de vernissage y compris les équipements de pré-press
Ta slovenski standard je istoveten z: EN 1010-2:2006/FprA1
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
85.100 Oprema za papirno industrijo Equipment for the paper
industry
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 1010-2:2006
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
December 2009
ICS 37.100.10; 85.100
English Version
Safety of machinery - Safety requirements for the design and
construction of printing and paper converting machines - Part 2:
Printing and varnishing machines including pre-press machinery
Sécurité des machines - Prescriptions de sécurité pour la Sicherheit von Maschinen - Sicherheitsanforderungen an
conception et la construction de machines d'impression et Konstruktion und Bau von Druck- und
de transformation du papier - Partie 2: Machines Papierverarbeitungsmaschinen - Teil 2: Druck- und
d'impression et de vernissage y compris les équipements Lackiermaschinen einschließlich Maschinen der
de pré-press Druckvorstufe
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 198.
This draft amendment A1, if approved, will modify the European Standard EN 1010-2:2006. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1010-2:2006/FprA1:2009: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modification to the Contents .4
2 Modification to Clause 2, Normative references .4
3 Modification to Clause 4, List of significant hazards .4
4 Modification to Clause 5, Safety requirements and/or measures .5
5 Modification to Clause 6, Verification of safety requirements and/or measures .9
6 Addition of a new Annex A . 10
Annex A (informative) Emission levels of sheet-fed presses resulting from tests . 11
A.1 General considerations . 11
A.1.1 Introduction . 11
A.1.2 Ozone . 11
A.1.3 Results . 12
A.2 Powder . 12
A.2.1 Situation . 12
A.2.2 Measurement . 12
A.2.3 Results . 12
A.3 Ink mist and varnish mist . 12
A.3.1 Situation . 12
A.3.2 Measurement . 13
A.3.3 Results . 13
A.4 Ammonia . 13
A.4.1 Situation . 13
A.4.2 Measurement . 14
A.4.3 Results . 14
A.5 Volatile organic compounds-isopropyl alcohol (VOC-IPA) and VOC hydrocarbon
compounds (cleaners/solvents) . 14
A.5.1 Situation . 14
A.5.2 Measurement . 15
A.5.3 Results of measurement . 15
7 Modification to Annex ZA, Relationship between this European Standard and the
Essential Requirements of EU Directive 98/37/EC . 16
8 Modification to Annex ZB, Relationship between this European Standard and the
Essential Requirements of EU Directive 94/9/EC . 17
9 Addition of a new Annex ZC, Relationship between this European Standard and the
Essential Requirements of EU Directive 2006/42/EC . 19
10 Modification to the Bibliography . 20
Foreword
This document (EN 1010-2:2006/FprA1:2009) has been prepared by Technical Committee CEN/TC 198
“Printing and paper machinery - Safety”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annexes ZA, ZB and ZC, which are integral parts of this
document.
1 Modification to the Contents
Add the following:
"Annex A – Emission levels of sheet-fed presses resulting from tests"
2 Modification to Clause 2, Normative references
Delete "EN 954-1:1996, Safety of machinery — Safety related parts of control systems — Part 1: General
principles for design" and add "EN ISO 13849-1:2008, Safety of machinery — Safety related parts of control
systems — General principles for design (ISO 13849-1:2006)".
Add "EN 1088, Safety of machinery — Interlocking devices associated with guards — Principles for design
and selection".
Replace "EN 1010-1:2004" with "EN 1010-1:2004+A1". In the text, replace everywhere "EN 1010-1:2004" with
"EN 1010-1:2004+A1".
Delete "EN 1050:1996, Safety of machinery — Principles for risk assessment" and add "EN ISO 14121-
1:2007, Safety of machinery — Risk assessment — Part 1: Principles (ISO 14121-1:2007)".
Replace "EN 1127-1:1997 with "EN 1127-1:2007".
Replace "EN 60204-1:1997, Safety of machinery — Electrical equipment of machines — Part 1: General
requirements (IEC 60204-1:1997)" with "EN 60204-1:2006, Safety of machinery — Electrical equipment of
machines — Part 1: General requirements (IEC 60204-1:2005, modified)". In the text, replace everywhere
"EN 60204-1:1997" with "EN 60204-1:2006".
Replace "EN 60825-1:1994, Safety of laser products — Part 1: Equipment classification, requirements and
user's guide (IEC 60825-1:1993)" with "EN 60825-1:2007, Safety of laser products — Part 1: Equipment
classification and requirements (IEC 60825-1:2007)".
Replace "EN 60950-1:2001, Information technology equipment — Safety — Part 1: General requirements
(IEC 60950-1:2001, modified)" with "EN 60950-1:2006, Information technology equipment — Safety — Part 1:
General requirements (IEC 60950-1:2005, modified)".
Add "EN 62061:2005, Safety of machinery — Functional safety of safety-related electrical, electronic and
programmable electronic control systems (IEC 62061:2005)".
Add "EN ISO 13857:2008, Safety of machinery — Safety distances to prevent hazard zones being reached by
upper and lower limbs (ISO 13857:2008)".
3 Modification to Clause 4, List of significant hazards
Replace the existing test in 4.2 with the following:
4.2 "It is of great importance that the manufacturer, takes into account the following principal aspects in
accordance with EN ISO 14121-1:2007:"
In Table 1, last column, in the heading, replace "EN 1050:1996 Annex A" with "EN ISO 14121-1:2007 Table
A.1".
In Table 1, in the row regarding "Slipping, tripping, falling", replace in the last column "19" with "1".
In Table 1, in the row regarding "Ejection of parts", replace in the last column "1.1.4" with "1".
In Table 1, in the row regarding "Hazards from substances and material used for processing, machine
operation or which are emitted during the process/Hazards resulting from contact with or inhalation of harmful
fluids, gases, fumes, dusts", replace in the last column "7.1" with "7".
In Table 1, in the row regarding "Hazards from ignition and explosion", replace in the last column "7.2" with
"7.3".
4 Modification to Clause 5, Safety requirements and/or measures
Replace the existing text in 5.2.2 with the following:
5.2.2 "Parts of the electric/electronic control system of pre-press machinery shall comply with 5.2.6.3 of EN
1010-1:2004+A1.
Parts of the electric/electronic control system of machines and equipment for the preparation of printing forms
may be designed in accordance with PL c of EN ISO 13849-1:2008 or SIL 1 of EN 62061:2005 as a deviation
r
from 5.2.6.3 of EN 1010-1:2004+A1. The control systems of interlocking devices for safety devices that
prevent access to laser radiation class 3B or 4, classified according to EN 60825-1:2007, shall be designed to
comply with PL d of EN ISO 13849-1:2008 or SIL 2 of EN 62061:2005."
r
5.2.11
Last indent, replace "5.8.4" with "5.2.8.4".
Replace the sentence after the last indent with
"The control system of the machine shall comply with 5.2.6.3 of EN 1010-1:2004+A1."
5.3.2
Replace the first paragraph with the following:
"Where inrunning nips on cylinders in the vicinity of points on the machine that are directly accessible after the
interlocking guards have been opened and where frequent interventions need to be carried out which cannot
be done with the machine at standstill (such as cleaning and setting-up or changing of printing plates), trip
devices in accordance with 5.2.10.1 of EN 1010-1:2004+A1 shall be used. For such trip devices, the
requirements of PL d of EN ISO 13849-1:2008 or SIL 2 of EN 62061:2005 shall be satisfied and the
r
interlocking system shall be designed such that the requirements for stopping paths specified in 5.2.10.2 of
EN 1010-1:2004+A1 are satisfied. Trip devices shall be designed such that cylinder gaps cannot be accessed
without operating the trip device to stop cylinder movement before the inrunning nip is reache
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.