CEN ISO/TS 21719-2:2018

Electronic fee collection - Personalization of on-board equipment (OBE) - Part 2: Using dedicated short-range communication (ISO/TS 21719-2:2018)

ISO/TS 21719-2:2018 specifies
-      personalization interface: dedicated short-range communication (DSRC),
-      physical systems: on-board equipment and the personalization equipment,
-      DSRC-link requirements,
-      EFC personalization functions according to ISO/TS 21719-1 when defined for the DSRC interface, and
-      security data elements and mechanisms to be used over the DSRC interface.
Protcol information conformance statement (PICS) proforma is provided in Annex B, whereas security computation examples are provided in Annex E.

Elektronische Gebührenerhebung - Personalisierung von Onboard Einrichtungen - Teil 2: Verwendung von dedizierter Nahbereichskommunikation (ISO/TS 21719-2:2018)

Perception de télépéage - Personnalisation des équipements embarqués - Partie 2: Utilisation des communications dédiées à courte portée (ISO/TS 21719-2:2018)

Elektronsko pobiranje pristojbin - Personalizacija (prilagajanje) opreme vozil - 2. del: Uporaba posebne komunikacije kratkega dosega (ISO/TS 21719-2:2018)

Področje uporabe te tehnične specifikacije zajema le:
• vmesnik za personalizacijo: sistem namenske komunikacije kratkega dosega (DSRC);
• fizične sisteme: OBE in oprema za personalizacijo,
• zahteve za povezavo DSRC,
• funkcije personalizacije EFC v skladu s 1. delom te tehnične specifikacije, če so določene za vmesnik DSRC,
• elementi varnostnih podatkov in mehanizmi, ki so namenjeni uporabi prek vmesnika DSRC.
Področje uporabe tega te tehnične specifikacije ne zajema določanja:
• postopkov za skladnost in specifikacije preskusa (to zagotavlja ločen sklop standardov),
• vzpostavljanja obratovalnih organizacij (npr. izvajalec storitev cestninjenja, agent za personalizacijo, zaupanja vredna tretja oseba itd.),
• pravnih vprašanj.

General Information

• Status: Withdrawn
• Publication Date: 13-Feb-2018
• Withdrawal Date: 01-Nov-2022
• ICS: 03.220.20 - Road transport
• ICS: 35.240.60 - IT applications in transport
• Technical Committee: CEN/TC 278 - Road transport and traffic telematics
• Drafting Committee: CEN/TC 278/WG 1 - Electronic fee collection and access control (EFC)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 02-Nov-2022
• Ref Project: SIST-TS CEN ISO/TS 21719-2:2018 - Electronic fee collection - Personalization of on-board equipment (OBE) - Part 2: Using dedicated short-range communication (ISO/TS 21719-2:2018)

Relations

• Replaced By: CEN ISO/TS 21719-2:2022 - Electronic fee collection - Personalization of on-board equipment (OBE) - Part 2: Using dedicated short-range communication (ISO/TS 21719-2:2022)
• Effective Date: 10-Nov-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2018
Elektronsko pobiranje pristojbin - Personalizacija (prilagajanje) opreme vozil - 2.
del: Uporaba posebne komunikacije kratkega dosega (ISO/TS 21719-2:2018)
Electronic fee collection - Personalization of on-board equipment (OBE) - Part 2: Using
dedicated short-range communication (ISO/TS 21719-2:2018)
Electronische Gebührenerhebung - Personalisierung von Onboard Einrichtungen - Teil 2:
Verwendung von dedizierter Nahbereichskommunikation (ISO/TS 21719-2:2018)
Perception du télépéage - Personnalisation des équipements embarqués - Partie 2:
Utilisation des communications dédiées à courte portée (ISO/TS 21719-2:2018)
Ta slovenski standard je istoveten z: CEN ISO/TS 21719-2:2018
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

CEN ISO/TS 21719-2
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
February 2018
TECHNISCHE SPEZIFIKATION
ICS 03.220.20; 35.240.60
English Version
Electronic fee collection - Personalization of on-board
equipment (OBE) - Part 2: Using dedicated short-range
communication (ISO/TS 21719-2:2018)
Perception de télépéage - Personnalisation des Elektronische Gebührenerhebung - Personalisierung
équipements embarqués - Partie 2: Utilisation des von Onboard Einrichtungen - Teil 2: Verwendung von
communications dédiées à courte portée (ISO/TS dedizierter Nahbereichskommunikation (ISO/TS
21719-2:2018) 21719-2:2018)
This Technical Specification (CEN/TS) was approved by CEN on 2 February 2018 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 21719-2:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (CEN ISO/TS 21719-2:2018) has been prepared by Technical Committee ISO/TC 204
"Intelligent transport systems" in collaboration with Technical Committee CEN/TC 278 “Intelligent
transport systems”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO/TS 21719-2:2018 has been approved by CEN as CEN ISO/TS 21719-2:2018 without any
modification.
TECHNICAL ISO/TS
SPECIFICATION 21719-2
First edition
2018-02
Electronic fee collection —
Personalization of on-board
equipment (OBE) —
Part 2:
Using dedicated short-range
communication
Perception de télépéage — Personnalisation des équipements
embarqués —
Partie 2: Utilisation des communications dédiées à courte portée
Reference number
ISO/TS 21719-2:2018(E)
©
ISO 2018
ISO/TS 21719-2:2018(E)
© ISO 2018, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2018 – All rights reserved

ISO/TS 21719-2:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
4 Abbreviated terms and symbols . 5
5 Conformance . 6
5.1 General . 6
5.2 Base standards . 6
5.3 Main contents of an EFC Personalization AP . 6
6 Personalization overview . 7
6.1 Process . 7
6.2 System architecture . 7
7 OBE requirements . 7
7.1 General . 7
7.2 DSRC lower layer requirements . 7
7.2.1 Supported DSRC stacks . 7
7.2.2 CEN DSRC stack . 8
7.3 OBE personalization functions . 8
7.3.1 General. 8
7.3.2 Initialization and termination . 9
7.3.3 Retrieving OBE identifier . 9
7.3.4 Writing of data . 9
7.4 Security requirements .11
7.5 Transaction requirements .13
8 Personalization equipment requirements .13
8.1 General .13
8.2 DSRC lower layer requirments .13
8.2.1 Supported DSRC stacks .13
8.2.2 CEN DSRC stack .13
8.3 PE personalization functions .13
8.4 Security requirements .14
8.5 Transaction requirements .14
Annex A (normative) Security calculations .15
Annex B (normative) PICS proforma .20
Annex C (normative) Personalization of ES 200 674-1 compliant OBEs .25
Annex D (informative) Transaction example .30
Annex E (informative) Security computation example .35
Bibliography .39
ISO/TS 21719-2:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO docum
...