EN ISO 11125-1:1997

Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993)

Specifies a method for the sampling from consignments and for the subdivision of the sample into quantities suitable for undertaking the appropriate test methods specified in other parts of ISO 11125.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für metallische Strahlmittel - Teil 1: Probenahme (ISO 11125-1:1993)

Dies ist ein Teil aus einer Reihe von Teilen der Norm ISO 11125, welche die Probenahme und die Prüfung von metallischen Strahlmitteln behandelt. Die verscheidenen Arten metallischer Strahlmittel und Anforderungen an diese sind in den verschiedenen Teilen von ISO 11124 enthalten. Die Normenreihen ISO 11124 und 11125 wurden als zusammengehöriger Satz von Internationalen Normen über metallische Strahlmittel ausgearbeitet.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs métalliques destinés à la préparation par projection - Partie 1: Echantillonnage (ISO 11125-1:1993)

La présente norme est l'une des parties de l'ISO 11125, qui traite de l'échantillonnage et des essais des abrasifs métalliques destinés à la préparation par projection. Les types d'abrasif métalliques et les prescriptions relatives à chacun figurent dans les différentes parties de l'ISO 11124. Les séries de normes ISO 11124 et ISO 11125 constituent une série cohérente de normes internationales sur les abrasifs métalliques destinés à la préparation par projection. L'annexe A donne des informations sur toutes les parties des deux séries. La présente partie de l'ISO 11125 prescrit une méthode d'échantillonnage des abrasifs métalliques destinés à la préparation par projection et de subdivision de l'échantillon en quantités appropriées permettant d'appliquer les méthodes d'essai spécifiées dans les autres parties de l'ISO 11125.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusne metode za kovinske granulate za peskanje - 1. del: Vzorčenje (ISO 11125-1:1993)

General Information

• Status: Withdrawn
• Publication Date: 17-Jun-1997
• Withdrawal Date: 30-Oct-2018
• ICS: 87.020 - Paint coating processes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 31-Oct-2018
• Ref Project: SIST EN ISO 11125-1:1997 - Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993)

Relations

• Replaced By: EN ISO 11125-1:2018 - Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:2018)
• Effective Date: 11-Jun-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-1997
3ULSUDYDMHNOHQLKSRGODJSUHGQDQDãDQMHPEDUYQLKLQVRURGQLKSUHPD]RY
3UHVNXVQHPHWRGH]DNRYLQVNHJUDQXODWH]DSHVNDQMHGHO9]RUþHQMH,62

Preparation of steel substrates before application of paints and related products - Test
methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für metallische Strahlmittel - Teil 1: Probenahme (ISO 11125-1:1993)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Méthodes d'essai pour abrasifs métalliques destinés a la préparation par
projection - Partie 1: Echantillonnage (ISO 11125-1:1993)
Ta slovenski standard je istoveten z: EN ISO 11125-1:1997
ICS:
25.220.10 Priprava površine Surface preparation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

INTERNATIONAL
ISO
STANDARD
11125-1
First edition
1993-12-15
Preparation of steel Substrates before
application of paints and related
products - Test methods for metallic
blast-cleaning abrasives -
Part 1:
Sampling
PGparation des subjectiles d’acier avant application de peintures et de
produits assimiks - M6thodes d’essai pour abrasifs m&alliques destines
A Ia pkparation par projection -
Partie 1: khantillonnage
Reference number
ISO 11125-1:1993(E)
ISO 11125~1:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take patt in the work. ISO
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 11125-1 was prepared by Technical Committee
lSO/TC 35, Paints and varnishes, Subcommittee SC 12, Preparation of
steel substra tes be fore applica tion o f pain ts and related products.
ISO 11125 consists of the following Parts, under the general title Prep-
aration of steel Substrates before application of paints and related
produc ts - Test methods for metallic blast-cleaning abrasives:
- Part 1: Sampling
- Part 2: Determination of particle size distribution
- Part 3: Determination of hardness
- Part 4: Determination of apparent density
- Part 5: Determination of percentage defective particles and of
micros truc ture
- Part 6: Determination of foreign matter
- Part 7: Determination of moisture
- Part 8: Determination of abrasive mechanical properties
Q ISO 1993
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1 211 Geneve 20 l Switzerland
Printed in Switzerland
0 ISO
ISO 11125=1:1993(E)
At the time of publication of this part of ISO 11125, part 8 was in course
of preparation.
Annex A of this part of ISO 11125 is for information only.

This page intentionally left blank

ISO 11125=1:1993(E)
INTERNATIONAL STANDARD 0 ISO
Preparation of steel Substrates before application of
- Test methods for
paints and related products
metallic blast-cleaning abrasives -
Part 1:
Sampling
2.3 Single Sample: A Sample obtained from the total
1 Scope
quantity by a Single sampling Operation. This Sample
is not immediately used for testing.
This is one of a number of Parts of ISO 11125 dealing
with the sampling and testing of metallic abrasives for
2.4 mixed Sample: A Sample obtained by mixing a
blast-cleaning.
number of Single samples.
The types of metallic abrasive and requirements
on each are contained in the various Parts of
2.5 reduced Sample: A Sample obtained by re-
ISO 11124.
duction of a mixed Sample.
The ISO 11124 and ISO 11125 series have been
NOTE 1 In Order to obtain a Sample quantity which is
drafted as a coherent set of International Standards
suitable for testing, all reduced samples but one are dis-
on metallic blast-cleaning abrasives. Information on all carded after each reduction; the reduction procedure is then
repeated if necessary on the Sample retained.
Parts of both series is given in annex A.
This part of ISO 11125 specifies a method for the
2.6 test Sample: A Sample that comprises a mass
sampling of metallic blast-cleaning abrasives from
or volume sufficient for testing, portions of which are
consignments and for the subdivision of the Sample
immediately used for testing.
into quantities suitable for undertaking the appropriate
test methods specified in other Parts of ISO 11125.
3 Apparatus
2 Definitions
3.1 Sample thief, made from seamless steel tubing
For the purposes of this part of ISO 11125, the fol
...