EN ISO 28706-2:2017

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)

ISO 28706-2:2017 specifies a test method for the determination of the resistance of flat surfaces of vitreous and porcelain enamels to boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours.
This method allows the determination of the resistance of vitreous and porcelain enamels to the liquid and vapour phases of the corrosive medium simultaneously.

Emails und Emaillierungen - Bestimmung der Beständigkeit gegen chemische Korrosion - Teil 2: Bestimmung der Beständigkeit gegen chemische Korrosion durch kochende Säuren, kochende neutrale Flüssigkeiten, alkalische Flüssigkeiten und/oder deren Dämpfe (ISO 28706-2:2017)

Dieses Dokument legt ein Prüfverfahren zur Bestimmung der Beständigkeit von ebenen Email-Oberflächen gegen kochende Säuren, kochende neutrale Flüssigkeiten, alkalische Flüssigkeiten und/oder deren Dämpfe fest.
Dieses Verfahren erlaubt die gleichzeitige Bestimmung der Beständigkeit von Emails und Emaillierungen gegen die flüssige und dampfförmige Phase des Korrosionsmittels.

Émaux vitrifiés - Détermination de la résistance à la corrosion chimique - Partie 2: Détermination de la résistance à la corrosion chimique par des acides bouillants, des liquides neutres bouillants, ou des liquides alcalins et/ou leurs vapeurs (ISO 28706-2:2017)

ISO 28706-2:2017 spécifie une méthode d'essai permettant de déterminer la résistance de surfaces planes en émail vitrifié à des acides bouillants, des liquides neutres bouillants, des liquides alcalins et/ou leurs vapeurs.
La présente méthode permet de déterminer simultanément la résistance des émaux vitrifiés aux phases liquide et vapeur du milieu corrosif.

Steklasti in porcelanski emajli - Ugotavljanje odpornosti proti kemični koroziji - 2. del: Ugotavljanje odpornosti proti kemični koroziji s kislinami in nevtralnimi tekočinami, ki vrejo, bazami in/ali njihovimi parami (ISO 28706-2:2017)

Ta dokument določa preskusno metodo za ugotavljanje odpornosti ravnih površin steklastih in porcelanskih emajlov proti kemični koroziji s kislinami ter nevtralnimi tekočinami, ki vrejo, bazami in/ali njihovimi parami.
Ta metoda omogoča ugotavljanje odpornosti steklastih in porcelanskih emajlov proti tekočem in plinastem stanju korozivnega medija.

General Information

• Status: Published
• Publication Date: 14-Mar-2017
• Withdrawal Date: 29-Sep-2017
• ICS: 25.220.50 - Enamels
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Mar-2017
• Completion Date: 15-Mar-2017
• Ref Project: SIST EN ISO 28706-2:2017 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)

Relations

• Replaces: EN ISO 28706-2:2011 - Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours (ISO 28706-2:2008)
• Effective Date: 22-Mar-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 28706-2:2017
01-maj-2017
1DGRPHãþD
SIST EN ISO 28706-2:2012
6WHNODVWLLQSRUFHODQVNLHPDMOL8JRWDYOMDQMHRGSRUQRVWLSURWLNHPLþQLNRUR]LML
GHO8JRWDYOMDQMHRGSRUQRVWLSURWLNHPLþQLNRUR]LMLVNLVOLQDPLLQQHYWUDOQLPL
WHNRþLQDPLNLYUHMRED]DPLLQDOLQMLKRYLPLSDUDPL,62
Vitreous and porcelain enamels - Determination of resistance to chemical corrosion -
Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral
liquids, alkaline liquids and/or their vapours (ISO 28706-2:2017)
Emails und Emaillierungen - Bestimmung der Beständigkeit gegen chemische Korrosion
- Teil 2: Bestimmung der Beständigkeit gegen chemische Korrosion durch kochende
Säuren, kochende neutrale Flüssigkeiten, alkalische Flüssigkeiten und/oder deren
Dämpfe (ISO 28706-2:2017)
Émaux vitrifiés - Détermination de la résistance à la corrosion chimique - Partie 2:
Détermination de la résistance à la corrosion chimique par des acides bouillants, ou des
liquides neutres bouillants,ou des liquides alcalins et/ou leurs vapeurs (ISO 28706-
2:2017)
Ta slovenski standard je istoveten z: EN ISO 28706-2:2017
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 28706-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 28706-2:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 28706-2:2017


EN ISO 28706-2
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2017
EUROPÄISCHE NORM
ICS 25.220.50 Supersedes EN ISO 28706-2:2011
English Version

Vitreous and porcelain enamels - Determination of
resistance to chemical corrosion - Part 2: Determination of
resistance to chemical corrosion by boiling acids, boiling
neutral liquids, alkaline liquids and/or their vapours (ISO
28706-2:2017)
Émaux vitrifiés - Détermination de la résistance à la Emails und Emaillierungen - Bestimmung der
corrosion chimique - Partie 2: Détermination de la Beständigkeit gegen chemische Korrosion - Teil 2:
résistance à la corrosion chimique par des acides Bestimmung der Beständigkeit gegen chemische
bouillants, des liquides neutres bouillants, ou des Korrosion durch kochende Säuren, kochende neutrale
liquides alcalins et/ou leurs vapeurs (ISO 28706- Flüssigkeiten, alkalische Flüssigkeiten und/oder deren
2:2017) Dämpfe (ISO 28706-2:2017)
This European Standard was approved by CEN on 28 February 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28706-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 28706-2:2017
EN ISO 28706-2:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 28706-2:2017
EN ISO 28706-2:2017 (E)
European foreword
This document (EN ISO 28706-2:2017) has been prepared by Technical Committee ISO/TC 107
"Metallic and other inorganic coatings" in collaboration with Technical Committee CEN/TC 262
“Metallic and other inorganic coatings” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2017 and conflicting national standards
shall be withdrawn at the latest by September 2017.
Attention is drawn to the possibility that some of the elements of this document may be the
...