Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series

This standard specifies the characteristics of bearings, spherical plain in corrosion resisting steel with selflubricating
liner, narrow series for aerospace applications.
They are intended for use in fixed or moving parts of the aircraft structure and control mechanisms.
They shall be used in the temperature range - 55 °C to 163 °C.

Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, schmale Reihe - Maße und Belastungen - Inch-Reihe

Diese Norm legt die Eigenschaften von Gelenklagern aus korrosionsbeständigem Stahl mit selbst-schmierender Beschichtung, schmale Reihe für die Anwendung in der Luft  und Raumfahrt fest.
Sie sind für die Verwendung in starren oder beweglichen Teilen des Flugwerkes (der Luftfahrzeugstruktur) und deren Betätigungsvorrichtungen bestimmt.
Sie sind im Temperaturbereich von - 55 °C bis 163 °C zu verwenden.

Série aérospatiale - Rotules lisses résistant à la corrosion à garniture autolubrifiante, série étroite - Dimensions et charges - Séries en inches

Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo, ozki tip - Mere in nosilnosti - Colski tip

General Information

Status
Withdrawn
Publication Date
09-Jun-2009
Withdrawal Date
26-Oct-2021
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
27-Oct-2021

Relations

Buy Standard

Standard
EN 4613:2009
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo, ozki tip - Mere in nosilnosti - Colski tipLuft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, schmale Reihe - Maße und Belastungen - Inch ReiheSérie aérospatiale - Rotules lisses résistant à la corrosion à garniture autolubrifiante, série étroite - Dimensions et charges - Séries en inchesAerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4613:2009SIST EN 4613:2009en01-september-2009SIST EN 4613:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4613June 2009ICS 49.035 English VersionAerospace series - Spherical plain bearings in corrosionresisting steel with self-lubricating liner, narrow series -Dimensions and loads - Inch seriesSérie aérospatiale - Rotules lisses résistant à la corrosion àgarniture autolubrifiante, série étroite - Dimensions etcharges - Séries en inchesLuft- und Raumfahrt - Gelenklager auskorrosionsbeständigem Stahl mit selbstschmierenderBeschichtung, schmale Reihe - Maße und Belastungen -Inch ReiheThis European Standard was approved by CEN on 20 March 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4613:2009: ESIST EN 4613:2009

EN 2133, Aerospace series — Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper, copper alloys and nickel alloys EN 2424, Aerospace series — Marking of aerospace products EN 2755, Aerospace series — Bearings, spherical plain in corrosion resisting steel with self-lubricating liner — Elevated load at ambient temperature — Technical specification 2 EN 3161, Aerospace series — Steel FE-PM3801 (X5CrNiCu17-4) — Air melted, solution treated and precipitation treated, bar a or D ≤ 200 mm — Rm ≥ 930 MPa ISO 1132-1, Rolling bearings — Tolerances — Part 1: Terms and definitions ISO 8075, Aerospace — Surface treatment of hardenable stainless steel parts TR 4475, Aerospace series — Bearings and mechanical transmissions for airframe applications — Vocabulary 3
3 Terms and definitions For the purposes of this document, the terms and definitions given in TR 4475 apply. 4 Symbols and abbreviations Symbols of limit deviations are in accordance with definitions of ISO 1132-1. α = maximum angle of tilt of the outer ring with respect to the inner ring, with the spherical raceway of the outer r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.