EN 12629-5-1:2003+A1:2010
(Main)Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for vertical manufacture of pipes, manholes and similar elements from concrete.
EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium silicate.
This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers.
1.2 This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This standard establishes safety requirements and/or methods of protection which applies to these machines.
1.3 This European standard applies to the pipe making machines manufacturing in the vertical axis which may form an integral part of a pipe making process plant.
1.4 This document is not applicable to pipe making machines manufacturing in the vertical axis, which are manufactured before the date of publication of this document by CEN.
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-1: Rohrmaschinen mit Fertigung in vertikaler Lage
Dieser Teil von EN 12629, zusammen mit EN 12629-1:2000+A1:2010, gilt für Maschinen zur
Herstellung von Rohren, Schächten und ähnlichen Betonelementen mit Fertigung in vertikaler Lage.
EN 12629-1:2000+A1:2010 spezifiziert allgemeine Anforderungen, die für Maschinen für die Herstellung von
Bauprodukten aus Beton und Kalksandsteinmassen gelten.
Dieses Dokument beschreibt die zusätzlichen Anforderungen für und/oder Abweichungen von
EN 12629-1:2000+A1:2010, die spezifisch für die Maschinen sind, die es abdeckt."
1.2 !Diese Europäische Norm behandelt alle signifikanten Gefährdungen, die auf diese Maschinen
zutreffen, wenn sie bestimmungsgemäß und unter den Bedingungen des Missbrauchs, die vernünftigerweise
vom Hersteller vorhersehbar sind, verwendet werden (siehe Abschnitt 4). Diese Europäische Norm spezifiziert
die entsprechenden technischen Maßnahmen zur Beseitigung oder Verminderung der Risiken, die von den
signifikanten Gefährdungen ausgehen.
Diese Norm legt Sicherheitsanforderungen und/oder Schutzverfahren fest, die für diese Maschinen gelten."
1.3 Diese Europäische Norm gilt für Rohrmaschinen mit Fertigung in vertikaler Lage, die als integraler
Bestandteil einer Rohrherstellungsanlage dienen können.
1.4 !Dieses Dokument gilt nicht für Rohrmaschinen mit Fertigung in vertikaler Lage, die vor dem Datum
der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden."
Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-1: Machines pour la fabrication de tuyaux dans l'axe vertical
!La présente partie de l'EN 12629, utilisée avec l'EN 12629-1:2000+A1:2010, s'applique aux machines
utilisées pour la fabrication verticale de tuyaux, trous d'homme et produits similaires en béton.
L'EN 12629-1:2000+A1:2010 spécifie les prescriptions générales applicables aux machines pour la fabrication
de produits de construction en béton et silico-calcaire.
Le présent document spécifie les prescriptions supplémentaires et/ou les dérogations à l’EN 12629-1:2000+A1:2010
spécifiques aux machines concernées."
1.2 !La présente Norme européenne traite tous les phénomènes dangereux significatifs spécifiques à ces
machines, lorsqu’elles sont utilisées normalement et dans des conditions de mauvais usage que le fabricant peut
raisonnablement prévoir (voir Article 4). La présente Norme européenne spécifie les mesures techniques appropriées
pour éliminer ou réduire les risques dus aux phénomènes dangereux significatifs."
!texte supprimé"
La présente norme spécifie les prescriptions de sécurité et/ou méthodes de protection qui s’appliquent à ces
machines.
1.3 La présente Norme européenne s’applique aux machines de fabrication des tuyaux travaillant sur l’axe vertical
qui peuvent former partie intégrante d’une installation de fabrication de tuyaux.
1.4 !Le présent document ne s'applique pas aux machines pour la fabrication de tuyaux dans l'axe vertical
fabriquées avant la date de publication du présent document par le CEN."
Stroji za izdelavo gradbenih proizvodov iz betona in apnenega peščenca - Varnost - 5-1. del: Stroji za izdelavo cevi po navpični osi
Ta del EN 12629 skupaj z EN 12629-1:2000+A1:2010 velja za stroje za navpično izdelavo cevi, jaškov in podobnih elementov iz betona. EN 12629-1:2000+A1:2010 določa splošne zahteve, ki veljajo za stroje za izdelavo gradbenih proizvodov iz betona in apnenega peščenca. Ta dokument določa dodatne zahteve in/ali odstopanja od EN 12629-1:2000+A1:2010, specifične za stroje, ki jih zajema. Ta evropski standard obravnava vse pomembne nevarnosti, ki se nanašajo na te stroje, kadar se uporabljajo kot predvideno in pod pogoji napačne uporabe, ki jih razumno predvidi proizvajalec (glej Klavzulo 4). Ta evropski standard določa primerne tehnične ukrepe za odpravo ali zmanjšanje tveganj, ki se pojavijo zaradi pomembnih nevarnosti. Ta standard vzpostavlja varnostne zahteve in/ali zaščitne metode, ki veljajo za te stroje. Ta evropski standard velja za stroje za izdelavo cevi po navpični osi, ki so lahko integralni del predelovalnega obrata za izdelavo cevi. Ta dokument ne velja za stroje za izdelavo cevi po navpični osi, ki so bili izdelani pred datumom, ko je CEN objavil ta dokument.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-1: Beton-Rohrmaschinen mit Fertigung in vertikaler LageMachines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-1: Machines pour la fabrication de tuyaux dans l'axe verticalMachines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis91.220Gradbena opremaConstruction equipmentICS:Ta slovenski standard je istoveten z:EN 12629-5-1:2003+A1:2010SIST EN 12629-5-1:2004+A1:2010en,fr01-december-2010SIST EN 12629-5-1:2004+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12629-5-1:2003+A1
September 2010 ICS 91.220 Supersedes EN 12629-5-1:2003English Version
Machines for the manufacture of constructional products from concrete and calcium-silicate - Safety - Part 5-1: Pipe making machines manufacturing in the vertical axis
Machines pour la fabrication de produits de construction en béton et silico-calcaire - Sécurité - Partie 5-1: Machines pour la fabrication de tuyaux dans l'axe vertical
Maschinen für die Herstellung von Bauprodukten aus Beton und Kalksandsteinmassen - Sicherheit - Teil 5-1: Beton-Rohrmaschinen mit Fertigung in vertikaler Lage This European Standard was approved by CEN on 3 November 2003 and includes Amendment 1 approved by CEN on 5 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12629-5-1:2003+A1:2010: ESIST EN 12629-5-1:2004+A1:2010
Definitions of terms . 17Annex B (informative)
Hazard zones . 21Annex ZA (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 25SIST EN 12629-5-1:2004+A1:2010
When provisions of this type C document are different from those, which are stated in type A or B documents, the provisions of this type C document take precedence over the provisions of the other documents, for machines that have been designed and built according to the provisions of this type C document.
This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific for the pipe making machines manufacturing in the vertical axis as described in 1.1. With the aim of clarifying the intentions of the document it should be noticed that the following assumptions were made when producing it: specific conditions of use or environmental conditions out of the scope of the document shall be the subject of negotiations between the manufacturer and the user/owner, the equipment will only be used by competent and designated persons,
the place of use/installation is adequately lit,
all operations are carried out by specially trained operators." SIST EN 12629-5-1:2004+A1:2010
!This part of EN 12629, taken together with EN 12629-1:2000+A1:2010, applies to machines for vertical manufacture of pipes, manholes and similar elements from concrete. EN 12629-1:2000+A1:2010 specifies general requirements applicable to machines for the manufacture of constructional products from concrete and calcium–silicate. This document specifies the additional requirements to and/or the deviations from EN 12629-1:2000+A1:2010 specific to the machines it covers." 1.2 !This European Standard deals with all significant hazards pertinent to these machines, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards." !deleted text" This standard establishes safety requirements and/or methods of protection which applies to these machines. 1.3 This European standard applies to the pipe making machines manufacturing in the vertical axis which may form an integral part of a pipe making process plant. 1.4 !This document is not applicable to pipe making machines manufacturing in the vertical axis, which are manufactured before the date of publication of this document by CEN." 2 Normative references !The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1050:1996, Safety of machinery — Principle for risk assessment EN 12629-1:2000+A1:2010, Machines for the manufacture of constructional products from concrete and calcium-silicate — Safety —Part 1: Common requirements EN ISO 12100-1:2003, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic terminology, methodology (ISO 12100-1:2003) EN ISO 12100-2:2003, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical principles (ISO 12100-2:2003)"
EN 12629-1:2000+A1:2010 and the following apply." 3.1 Product 3.1.1 pipe hollow body manufactured from concrete, which may or may not contain reinforcing material. It is predominantly used in conjunction with other concrete pipes as an underground pipeline, in order to convey liquids !(See also EN 12629-1:2000+A1:2010, 3.1.7)" 3.1.2 manhole hollow body manufactured from concrete and e.g. used in conjunction with other manholes to form vertical access to an underground pipeline; or for conveying liquids to an underground pipeline. It is often manufactured with cast-in steps as means for access 3.2 pipe making machine machine which fabricates pipes, manholes and similar elements
The vertical pipe making machines are divided into the following types as shown in annex A: Type 1 Fully automatic machine type with auxiliary automation equipment – for pipes and similar elements (See Figure A.1) Type 2 Semi-automatic type of machine (works with crane for demoulding) that can have more casting stations – for pipes, manholes and similar elements (See Figure A.2) Type 3 Fully automatic machine type with auxiliary automation equipment – mainly for manholes (See Figure A.3) Type 4 Fully automatic machine type with auxiliary automation equipment (works with crane or forklift truck for demoulding) – for pipes (See Figure A.4) 3.3 mixture feed equipment equipment which is integral with the pipe making machine for the receiving and transfer of the mixture to the casting station
3.4 casting mould component consisting of a pallet or base ring, inner former and an outer shell, the concrete pipe is formed in the space between the inner former and the shell 3.5 packerhead rotating device which passes through the mould to distribute and compact the concrete within the casting mould 3.6 casting station part of the pipe-making machine which consists of the casting mould(s) and associated fixtures where the pipes are formed
3.7 machine pit part of the machine which is below floor level and can contain part of the casting station SIST EN 12629-5-1:2004+A1:2010
List of significant hazards This clause contains all hazards, as far as they are dealt with in this European Standard, identified by risk assessment signific
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.