iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14415:2004

(Main)

Geosynthetic barriers - Test method for determining the resistance to leaching

Geosynthetic barriers - Test method for determining the resistance to leaching

This European Standard describes a method of testing the resistance to leaching of polymeric or bituminous geosynthetic barriers, and the polymeric component of geosynthetic clay barriers, in hot water (method A), aqueous alkaline liquids (method B) and organic alcohols (method C).

Geosynthetische Dichtungsbahnen - Prüfverfahren zur Bestimmung der Beständigkeit gegen Auslaugen

Diese Europäische Norm beschreibt Laboratoriumsverfahren zur Prüfung des Auslaugungsverhaltens von polymeren oder bituminösen geosynthetischen Dichtungsbahnen und geosynthetischen Tondichtungsbahnen in heißem Wasser (Verfahren A), wässrigen alkalischen Flüssigkeiten (Verfahren B) und organischen Alkoholen (Verfahren C).

Géomembranes, géosynthétiques bentonitiques - Méthode d'essai pour la détermination de la résistance à la lixiviation

La présente norme décrit les modes opératoires de laboratoire pour évaluer le comportement à la lixiviation des géomembranes bitumineuses ou polymériques ainsi que des géosynthétiques bentonitiques dans l'eau chaude (méthode A), les liquides alcalins (méthode B) et les alcools organiques (méthode C).

Geosintetične zapore - Preskusna metoda za ugotavljanje odpornosti proti luženju

General Information

Status
Published
Publication Date
18-May-2004
ICS
59.080.70 - Geotextiles
Technical Committee
CEN/TC 189 - Geotextiles and geotextile-related products
Drafting Committee
CEN/TC 189/WG 5 - Durability
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
25-Jan-2022
Ref Project
SIST EN 14415:2004 - Geosynthetic barriers - Test method for determining the resistance to leaching

Buy Standard

EN 14415:2004EN 14415:2004
PreviousNext
Standard
EN 14415:2004
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geosynthetische Dichtungsbahnen - Prüfverfahren zur Bestimmung der Beständigkeit gegen AuslaugenGéomembranes, géosynthétiques bentonitiques - Méthode d'essai pour la détermination de la résistance a la lixiviationGeosynthetic barriers - Test method for determining the resistance to leachin
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 13431:2024(Main)
Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:2024)
SIST EN ISO 13431:2024

This document specifies a method for determining the tensile creep and creep rupture behaviour of geotextiles and geotextile-related products in an unconfined situation.
Application of this document is limited to products and applications where the risk of collapse of a structure due to premature failure or to strain and time variation of the reinforcement under constant load is of essential importance.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13426-2:2024(Main)
Geotextiles and geotextile-related products - Strength of internal structural junctions - Part 2: Geocomposites (ISO 13426-2:2024)
SIST EN ISO 13426-2:2024

This document describes index tests for determining the strength of the internal structural junctions under different loading conditions of all geocomposites and of clay geosynthetic barriers.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9862:2023(Main)
Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2023)
SIST EN ISO 9862:2024

This document establishes general principles for the sampling of geosynthetics delivered to construction sites, and for the preparation of test specimens from the samples.
The sampling principles are applicable to geosynthetics supplied in rolls or expandable panels.
NOTE            ISO 186 can be used for products supplied in sheet form.
The specimen-preparation principles are applicable to all geosynthetics.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17738:2023(Main)
Geotextiles and geotextile-related products - Damage during installation procedure - Full scale test
SIST EN 17738:2023

This document describes a procedure for producing mechanical damage to geotextiles and geotextile-related products due only to compaction of soil or other materials. The damage is assessed visually and by the loss of tensile strength or other reference tests used to assess the damage caused by this procedure.
The method described is a full-scale test procedure, using a range of fills and compaction methods, and for the derivation of a reduction factor for installation damage for geotextiles and geotextile-related products.
This document excludes geosynthetic barriers and products used in pavements and asphalt overlays.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16416:2023(Main)
Geosynthetic clay barriers - Determination of water flux index - Flexible wall permeameter method at constant head
SIST EN 16416:2023

This document specifies an index test method that covers laboratory measurement of water flux through saturated clay geosynthetic barrier (GBR-C) specimens using a flexible wall permeameter at constant head.
This test method is applicable to GBR-C products with no additional sealing layers attached (e.g. polymeric or bituminous).
This test method specifies a measurement of flux under a prescribed set of conditions that can be used for manufacturing quality control. The test method can also be used to check conformance.
The flux value determined using this test method is not considered to be representative of the in-service flux of a GBR-C.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12447:2021(Main)
Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water
SIST EN 12447:2021

This document specifies a screening test method for determining the resistance of geotextiles and geotextile-related products to hydrolysis by exposing test specimens to water at elevated temperatures, followed by an evaluation of the changes in properties resulting from such exposure. It is intended as a means of establishing a minimum acceptable level of durability.
The tests described in this document do not allow the determination of reduction factors. The tests described in this document are screening tests to show the ability of a product to serve for a certain time. The reference strength and retained strength of products investigated in this document need to be determined in the same way in accordance with EN 12226.
The test is applicable to any geotextile and geotextile-related product susceptible to hydrolysis, in particular polyester and polyamide based materials, and in addition to the yarns from which these geotextiles are made.
This method is not intended for determining the resistance of geotextiles to hydrolysis under highly acid or alkaline conditions.
NOTE   Performance tests to predict long-term lifetime or to compare products of different polymers or of similar polymers with differing structures can be based on the same method but with a wider range of temperatures and durations.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17445:2021(Main)
Geosynthetics - Standard test for the simulation of rainfall-induced erosion on the surface of a slope protected by geosynthetic erosion control products
SIST-TS CEN/TS 17445:2021

This document specifies an index test method for the simulation of rainfall-induced erosion on the surface of a slope protected by geosynthetic erosion control products.
The test is normally carried out on specimens conditioned under a specified atmosphere.
The test is applicable to most geosynthetics, but is especially suited to geosynthetic erosion control products.

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 25619-1:2021(Main)
Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2021)
SIST EN ISO 25619-1:2021

This document specifies index test methods for determining the compressive creep properties of geosynthetic products. The test specimens are subjected either to normal compressive loading or to a combination of normal compressive loading and shear loading.
The test method with a normal load only (see Clause 5) is the standard method.
The test method in which combined normal and shear loads are applied (see Clause 6) is intended for products that are sensitive to shear failure, i.e. which have a columnar or cuspated structure.
The tests are carried out on dry specimens or on specimens immersed in water. The test is intended to be carried out with the specimen immersed in water when any part of the geosynthetic product contains a hydrophilic polymer.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    24 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12225:2020(Main)
Geosynthetics - Method for determining the microbiological resistance by a soil burial test
SIST EN 12225:2021

This document specifies a method for the determination of the microbiological resistance of geosynthetics including those of natural fibres and biodegradable polymers by a soil burial test.
NOTE   Experience and exhumation of geosynthetics which had performed successfully, in some cases for more than two decades, indicate that geosynthetics made out of synthetic materials are generally resistant against microbial initiated decay. It can therefore be expected that most of these products commercially available at the present time will pass the soil burial test successfully and it is probably not necessary to submit them all to this test independent of their function. However, if the requirements for appropriate functioning of the geosynthetics demand proof of microbiological resistance or if they are manufactured from newly developed polymers whose resistance is in any doubt, the soil burial test can provide additional information.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12958-2:2020(Main)
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane - Part 2: Performance test (ISO 12958-2:2020)
SIST EN ISO 12958-2:2021

This document specifies a method for determining the constant-head water flow capacity within the plane of a geotextile or geotextile-related product, using boundary materials and test conditions of interest. A standard series of test conditions are proposed, involving soil confinement, low hydraulic gradients, seating times and an array of normal loads.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    German language
    sale 10% off
    e-Library read for
    1 day