EN ISO 8130-13:2010

Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)

The standard specifies a method for the determination of the equivalent-sphere particle size distribution of coating powders by laser diffraction and is suitable for discriminating between particles of the size range from 1 µm to 300 µm.

Pulverlacke - Teil 13: Teilchengrößenanalyse durch Laserbeugung (ISO 8130-13:2001)

Dieser Teil von ISO 8130 gehört zu einer Reihe von Normen, welche die Probenahme und die Prüfung von
Beschichtungsstoffen, wie Lacke und Anstrichstoffe, behandelt.
Er legt ein Verfahren zum Bestimmen der Teilchengrößenverteilung von Pulverlacken durch Laserbeugung
anhand des Äquivalentdurchmessers der Teilchen fest und ist geeignet, zwischen Teilchen im Größenbereich von
1 μm bis 300 μm zu unterscheiden.
Das angegebene Verfahren ist nur für trockene Pulver anwendbar.
ANMERKUNG Mit den meisten Geräten kann auch zwischen Teilchen mit Größen jenseits dieser Grenzen
unterschieden werden.

Poudres pour revêtement - Partie 13: Analyse granulométrique par diffraction laser (ISO 8130-13:2001)

Praškasti premazi - 13. del: Granulometrijska analiza z lasersko difrakcijo (ISO 8130-13:2001)

Ta del ISO 8130 je eden iz serije standardov, ki obravnavajo vzorčenje in preskušanje barv, lakov in sorodnih proizvodov. Določa metodo za ugotavljanje porazdelitve velikosti kroglicam enakovrednih delcev z lasersko difrakcijo, ki je primerna za ločevanje med delci v razponu velikosti med 1 μm in 300 μm. Ta metoda velja samo za suhe praške.

General Information

• Status: Withdrawn
• Publication Date: 09-Nov-2010
• Withdrawal Date: 07-May-2019
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 08-May-2019
• Ref Project: SIST EN ISO 8130-13:2012 - Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)

Relations

• Replaced By: EN ISO 8130-13:2019 - Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2019)
• Effective Date: 11-Feb-2015

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2012
Praškasti premazi - 13. del: Granulometrijska analiza z lasersko difrakcijo (ISO
8130-13:2001)
Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001)
Pulverlacke - Teil 13: Teilchengrößenanalyse durch Laserbeugung (ISO 8130-13:2001)
Poudres pour revêtement - Partie 13: Analyse granulométrique par diffraction laser (ISO
8130-13:2001)
Ta slovenski standard je istoveten z: EN ISO 8130-13:2010
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8130-13
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 87.040
English Version
Coating powders - Part 13: Particle size analysis by laser
diffraction (ISO 8130-13:2001)
Poudres pour revêtement - Partie 13: Analyse Pulverlacke - Teil 13: Teilchengrößenanalyse durch
granulométrique par diffraction laser (ISO 8130-13:2001) Laserbeugung (ISO 8130-13:2001)
This European Standard was approved by CEN on 16 October 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-13:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 8130-13:2001 has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes”
of the International Organization for Standardization (ISO) and has been taken over as EN ISO 8130-13:2010
by Technical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 8130-13:2001 has been approved by CEN as a EN ISO 8130-13:2010 without any
modification.
INTERNATIONAL ISO
STANDARD 8130-13
First edition
2001-09-01
Coating powders —
Part 13:
Particle size analysis by laser diffraction
Poudres pour revêtement —
Partie 13: Analyse granulométrique par diffraction laser

Reference number
ISO 8130-13:2001(E)
©
ISO 2001
ISO 8130-13:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

ISO 8130-13:2001(E)
Contents Page
Foreword.iv
1 Scope.1
2 Normative references.1
3 Term and definition .1
4 Principle.2
5 Apparatus.2
6 Sampling.2
7 Conditions.2
8 Procedure.2
9 Calculation of results.3
10 Expression of results.3
11 Precision.3
12 Test report.4

ISO 8130-13:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies c
...