EN ISO 3994:2014
(Main)Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014)
ISO 3994:2014 specifies the requirements for three types of helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of water, weak aqueous chemical solutions and abrasive solids and slurries, for use in the ambient temperature range from −10 °C to 55 °C.
The three types of hose are for light-, medium- and heavy-duty applications.
Kunststoffschläuche - Mit einer thermoplastischen Wendel verstärkte thermoplastische Schläuche zum Ansaugen und Fördern wässriger Stoffe - Anforderung (ISO 3994:2014)
Diese Internationale Norm legt Anforderungen fest für drei Arten von thermoplastischen Schläuchen verstärkt
mit einer thermoplastischen Wendel zum Ansaugen und Fördern von Wasser, verdünnten wässrigen
Chemikalienlösungen und abrasiven Feststoffen und Schlämmen für den Gebrauch in einem
Umgebungstemperaturbereich von 10 °C bis 55 °C.
Diese drei Arten von Schläuchen sind anwendbar für leichte, mittlere und schwere Beanspruchungen
Die in dieser Internationalen Norm enthaltenen Schlaucharten sind nicht bestimmt für die Verwendung mit
entflammbaren und brennbaren Materialien, auch nicht mit aromatischen Lösungsmitteln.
ANMERKUNG Schläuche mit ähnlichem Aufbau zum Ansaugen und Fördern für die Feuerbekämpfung sind in
ISO 14557 Fire-fighting hoses — Rubber and plastics suction hoses and hose assemblies beschrieben.
Tuyaux en plastiques - Tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement de matières aqueuses - Spécifications (ISO 3994:2014)
L'ISO 3994:2014 spécifie les exigences pour trois types de tuyaux thermoplastiques à renforcement thermoplastique en spirale pour aspiration et refoulement pour une utilisation dans la plage de température de − 10 °C à + 55 °C.
Les trois types de tuyaux sont prévus pour des applications légères, moyennes et lourdes.
Polimerne cevi - S plastomerno spiralo ojačene plastomerne cevi za sesanje in odvajanje vodnih materialov - Specifikacija (ISO 3994:2014)
Standard EN ISO 3994 določa zahteve za tri vrste s plastomerno spiralo ojačenih plastomernih cevi za črpanje in odvajanje vode, šibkih vodnih kemičnih raztopin ter abrazivnih trdnih snovi in blata, za uporabo pri temperaturi okolja od −10 °C do 55 °C. Trije tipi cevi so namenjeni za lahke, srednje in težke obremenitve. Tipi cevi, ki jih obravnava ta mednarodni standard, niso namenjeni uporabi z vnetljivimi ali gorljivimi materiali ali z aromatskimi topili.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2014
1DGRPHãþD
SIST EN ISO 3994:2011
3ROLPHUQHFHYL6SODVWRPHUQRVSLUDORRMDþHQHSODVWRPHUQHFHYL]DVHVDQMHLQ
RGYDMDQMHYRGQLKPDWHULDORY6SHFLILNDFLMD ,62
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and
discharge of aqueous materials - Specification (ISO 3994:2014)
Kunststoffschläuche - Mit einer thermoplastischen Wendel verstärkte thermoplastische
Schläuche zum Ansaugen und Fördern wässriger Stoffe - Anforderung (ISO 3994:2014)
Tuyaux en plastiques - Tuyaux thermoplastiques à renforcement thermoplastique en
spirale pour aspiration et refoulement de matières aqueuses - Spécifications (ISO
3994:2014)
Ta slovenski standard je istoveten z: EN ISO 3994:2014
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
83.120 2MDþDQLSROLPHUL Reinforced plastics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 3994
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2014
ICS 23.040.70 Supersedes EN ISO 3994:2011
English Version
Plastics hoses - Helical-thermoplastic-reinforced thermoplastics
hoses for suction and discharge of aqueous materials -
Specification (ISO 3994:2014)
Tuyaux en plastiques - Tuyaux thermoplastiques à Kunststoffschläuche - Mit einer thermoplastischen Wendel
renforcement thermoplastique en spirale pour aspiration et verstärkte thermoplastische Schläuche zum Ansaugen und
refoulement de matières aqueuses - Spécifications (ISO Fördern wässriger Stoffe - Anforderung (ISO 3994:2014)
3994:2014)
This European Standard was approved by CEN on 17 April 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3994:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 3994:2014) has been prepared by Technical Committee ISO/TC 45 “Rubber and
rubber products” in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and
hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2015, and conflicting national standards shall be withdrawn
at the latest by February 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3994:2011.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 3994:2014 has been approved by CEN as EN ISO 3994:2014 without any modification.
INTERNATIONAL ISO
STANDARD 3994
Fourth edition
2014-08-15
Plastics hoses — Helical-
thermoplastic-reinforced
thermoplastics hoses for suction and
discharge of aqueous materials —
Specification
Tuyaux en plastiques — Tuyaux thermoplastiques à renforcement
thermoplastique en spirale pour aspiration et refoulement de
matières aqueuses — Spécifications
Reference number
ISO 3994:2014(E)
©
ISO 2014
ISO 3994:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 3994:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 2
5 Materials and construction . 2
6 Dimensions and tolerances . 2
6.1 Nominal bores, inside diameters and tolerances . 2
6.2 Length tolerances . 2
7 Performance requirements . 3
7.1 Hydrostatic testing at 23 °C ± 2 °C . 3
7.2 Hydrostatic testing at 55 °C ± 2 °C . 4
7.3 Maximum working pressure . 4
7.4 Tensile test . 5
7.5 Vacuum test . 5
7.6 Reinforcement fracture test . 5
7.7 Minimum bend radius . 6
7.8 Cold-bend radius . 6
7.9 Loss in mass on heating . 6
7.10 Exposure to xenon-arc lamp. 7
8 Type, routine and production testing . 7
9 Marking . 7
10 Recommendations for packing and storage . 7
11 Test report/certificate . 7
Annex A (normative) Tensile test . 8
Annex B (normative) Vacuum test .10
Annex C (normative) Reinforcement fracture test .11
Annex D (normative) Type and routine tests .13
Annex E (informative) Recommended tests for production testing .14
Bibliography .15
ISO 3994:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 45, Rubber and rubber products, Subcommittee SC 1,
Rubber and plastics hoses and hose assemblies.
This fourth edition cancels and replaces the third edition (ISO 3994:2007), which has been technically
revised.
iv © ISO 2014 –
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.