Bicycles - Accessories for bicycles - Luggage carriers

This European Standard specifies safety and performance requirements for the design and testing of luggage carriers intended for permanent mounting above or adjacent to the wheels of cycles and lays down guide lines for instructions on the use and care of such luggage carriers.
This European Standard does not apply to removable luggage (for example handlebar bags or baskets that are not permanently attached).

Fahrräder - Zubehör für Fahrräder - Gepäckträger

Diese Europäische Norm legt Anforderungen an die Sicherheitstechnik und die Leistungsfähigkeit bei der
Konstruktion und Prüfung von Gepäckträgern, die für den dauerhaften Anbau über und neben den Laufrädern
von Rädern vorgesehen sind, und enthält Anleitungen zur Benutzung und Pflege dieser Gepäckträger.
Diese Europäische Norm gilt nicht für abnehmbare Gepäckträger (z. B. Taschen oder Körbe, die nicht
dauerhaft am Lenker angebracht sind).

Bicyclettes - Accessoires pour bicyclettes - Porte-bagages

La présente Norme européenne prescrit les exigences de sécurité et de performance à observer lors de la conception et des essais des porte-bagages destinés à être montés au-dessus ou à côté des roues des cycles, et précise les lignes directrices concernant l'utilisation et l'entretien de ceux-ci.
La présente Norme européenne ne s'applique pas aux bagages amovibles (par exemple sacs de guidon ou panier qui ne sont pas fixés d’une façon permanente).

Kolesa – Dodatna oprema za kolesa – Prtljažniki

General Information

Status
Withdrawn
Publication Date
31-Jan-2006
Withdrawal Date
19-Jul-2016
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
20-Jul-2016

Relations

Buy Standard

Standard
EN 14872:2006
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 14872:2005
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bicycles - Accessories for bicycles - Luggage carriersKolesa – Dodatna oprema za kolesa – PrtljažnikiBicyclettes - Accessoires pour bicyclettes - Porte-bagagesFahrräder - Zubehör für Fahrräder - GepäckträgerTa slovenski standard je istoveten z:EN 14872:2006SIST EN 14872:2006en,fr,de43.150ICS:SLOVENSKI
STANDARDSIST EN 14872:200601-september-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14872February 2006ICS 43.150 English VersionBicycles - Accessories for bicycles - Luggage carriersBicyclettes - Accessoires pour bicyclettes - Porte-baggagesFahrräder - Zubehör für Fahrräder - GepäckträgerThis European Standard was approved by CEN on 16 December 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14872:2006: E



EN 14872:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Classification.6 5 Requirements and test methods.7 5.1 General.7 5.2 Tolerances.7 5.3 Sharp edges.7 5.4 Security of safety-related fasteners.7 5.4.1 Security of screws.7 5.4.2 Minimum failure torque.7 5.5 Crack detection methods.7 5.6 Dimensions.8 5.7 Protrusions.8 5.7.1 Requirement.8 5.7.2 Test method.9 5.8 Assembly.
...

SLOVENSKI oSIST prEN 14872:2005

PREDSTANDARD
december 2005
Bicycles - Accessories for bicycles - Luggage carriers
ICS 43.150 Referenčna številka
oSIST prEN 14872:2005(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
FINAL DRAFT
prEN 14872
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 43.150

English Version
Bicycles - Accessories for bicycles - Luggage carriers
Bicyclettes - Accessoires pour bicyclettes - Porte-baggages Fahrräder - Zubehör für Fahrräder - Gepäckträger
This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee CEN/TC
333.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 14872:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN 14872:2005 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Classification.6
5 Requirements and test methods.7
5.1 General.7
5.2 Tolerances .7
5.3 Sharp edges .7
5.4 Security of safety-related fasteners.7
5.4.1 Security of screws .7
5.4.2 Minimum failure torque .7
5.5 Crack detection methods.7
5.6 Dimensions.8
5.7 Protrusions.8
5.7.1 Requirement.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.