EN ISO 8496:2004

Metallic materials - Tube - Ring tensile test (ISO 8496:1998)

WI created following Res COCOR 10/2001: approval of ECISS/TC 29 business plan (CC/010719)

Metallische Werkstoffe - Rohr - Ringzugversuch (ISO 8496:1998)

In dieser Internationalen Norm ist der Ringzugversuch für Rohre festgelegt. Er dient der Feststellung von Oberflächen- und Innenfehlern durch eine Beanspruchung einer Probe bis zum Bruch. Er darf auch zur Bestimmung der Umformbarkeit von Rohren angewandt werden.
Der Ringzugversuch ist anwendbar auf Rohre mit einem Außendurchmesser über 150 mm und Wanddicken nicht größer als 40 mm. Der Innendurchmesser muss größer als 100 mm sein.

Matériaux métalliques - Tubes - Essai de traction sur anneaux (ISO 8496:1998)

Kovinski materiali - Cev - Natezni preskus obroča (ISO 8496:1998)

General Information

• Status: Withdrawn
• Publication Date: 20-Jul-2004
• Withdrawal Date: 19-Nov-2013
• ICS: 77.040.10 - Mechanical testing of metals
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 9 - Mechanical testing of tubes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Nov-2013
• Completion Date: 20-Nov-2013
• Ref Project: SIST EN ISO 8496:2004 - Metallic materials - Tube - Ring tensile test (ISO 8496:1998)

Relations

• Replaces: EN 10237:1993 - Metallic materials - Tube - Ring tensile test
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 8496:2013 - Metallic materials - Tube - Ring tensile test (ISO 8496:2013)
• Effective Date: 17-Apr-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2004
1DGRPHãþD
SIST EN 10237:1998
.RYLQVNLPDWHULDOL&HY1DWH]QLSUHVNXVREURþD,62
Metallic materials - Tube - Ring tensile test (ISO 8496:1998)
Metallische Werkstoffe - Rohr - Ringzugversuch (ISO 8496:1998)
Matériaux métalliques - Tubes - Essai de traction sur anneaux (ISO 8496:1998)
Ta slovenski standard je istoveten z: EN ISO 8496:2004
ICS:
77.040.10 Mehansko preskušanje kovin Mechanical testing of metals
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8496
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS 77.040.10 Supersedes EN 10237:1993
English version
Metallic materials - Tube - Ring tensile test (ISO 8496:1998)
Matériaux métalliques - Tubes - Essai de traction sur Metallische Werkstoffe - Rohr - Ringzugversuch (ISO
anneaux (ISO 8496:1998) 8496:1998)
This European Standard was approved by CEN on 1 July 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8496:2004: E
worldwide for CEN national Members.

Foreword
The text of ISO 8496:1998 has been prepared by Technical Committee ISO/TC 164
"Mechanical testing of metals” of the International Organization for Standardization (ISO) and
has been taken over as EN ISO 8496:2004 by Technical Committee ECISS/TC 29 "Steel
tubes and fittings for steel tubes", the secretariat of which is held by UNI.

This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by January 2005, and conflicting national
standards shall be withdrawn at the latest by January 2005.

This document supersedes EN 10237:1993.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 8496:1998 has been approved by CEN as EN ISO 8496:2004 without any
modifications.
INTERNATIONAL ISO
STANDARD 8496
Second edition
1998-11-01
Metallic materials — Tube —
Ring tensile test
Matériaux métalliques — Tubes — Essai de traction sur anneaux
A
Reference number
ISO 8496:1998(E)
ISO 8496:1998(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The wor
...