EN 10216-5:2004

Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

This document specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section made of austenitic (including creep resisting steel) and austenitic-ferritic stainless steel which are applied for pressure and corrosion resisting purposes at room temperature, at low temperatures or at elevated temperatures.

Nahtlose Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 5: Rohre aus nichtrostenden Stählen

Dieser Teil der EN 10216 legt die technischen Lieferbedingungen mit zwei Prüfkategorien für nahtlose Rohre mit kreisförmigem Querschnitt aus austenitischen (einschließlich warmfesten) Stählen und aus austenitisch-ferritischen Stählen fest, die für den Einsatz im Druckbehälterbau und für korrosive Medien bei Raumtemperatur, bei tiefen Temperaturen und bei erhöhten Temperaturen bestimmt sind,

Tubes sans soudure pour service sous pression - Conditions techniques de livraison - Partie 5: Tubes en aciers inoxydables

La présente norme spécifie les conditions techniques de livraison, selon deux catégories d'essai, pour les tubes sans soudure à section circulaire en acier inoxydable austénitique (y compris acier résistant au fluage) et austéno-ferritique, utilisés en service sous pression et pour des applications avec résistance à la corrosion, à température ambiante ou à haute ou basse température.

Nevarjene jeklene cevi za tlačne posode - Tehnični dobavni pogoji - 5. del: Cevi iz nerjavnega jekla

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2004
• Withdrawal Date: 10-Dec-2013
• ICS: 23.040.10 - Iron and steel pipes
• ICS: 77.140.75 - Steel pipes and tubes for specific use
• Technical Committee: ECISS/TC 110 - Steel tubes, and iron and steel fittings
• Drafting Committee: ECISS/TC 29/SC 1/WG 3 - Stainless steels tubes for pressure purposes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 11-Dec-2013
• Completion Date: 11-Dec-2013
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 10216-5:2004 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes

Relations

• Replaced By: EN 10216-5:2013 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
• Effective Date: 15-Apr-2009
• Corrected By: EN 10216-5:2004/AC:2008 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nahtlose Stahlrohre für Druckbeanspruchungen - Technische Lieferbedingungen - Teil 5: Rohre aus nichtrostenden StählenTubes sans soudure pour service sous pression - Conditions techniques de livraison - Partie 5: Tubes en aciers inoxydablesSeamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes77.140.75Jeklene cevi in cevni profili za posebne nameneSteel pipes and tubes for specific use23.020.30MHNOHQNHPressure vessels, gas cylindersICS:Ta slovenski standard je istoveten z:EN 10216-5:2004SIST EN 10216-5:2004en01-november-2004SIST EN 10216-5:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10216-5September 2004ICS 23.040.10; 77.140.75 English versionSeamless steel tubes for pressure purposes - Technical deliveryconditions - Part 5: Stainless steel tubesTubes en acier sans soudure pour service sous pression -Conditions techniques de livraison - Partie 5: Tubes enaciers inoxydablesNahtlose Stahlrohre für Druckbeanspruchungen -Technische Lieferbedingungen - Teil 5: Rohre ausnichtrostenden StählenThis European Standard was approved by CEN on 3 March 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10216-5:2004: ESIST EN 10216-5:2004

Reference data of strength values for creep rupture of austenitic steels in the solution annealed condition.38 SIST EN 10216-5:2004

Clauses of this part of EN 10216 addressing essential
safety requirements of the EU Directive 97/23/EC.44 Bibliography.45
...