FprEN 13877-1

Concrete pavements - Part 1: Materials

This document specifies requirements for the constituents (concrete and other materials) of concrete pavements, cast in situ. Concrete compacted by rollers is not covered by this document.
This document covers concrete pavements for roads and other traffic-bearing structures.

Fahrbahnbefestigungen aus Beton - Teil 1: Baustoffe

Dieses Dokument legt Anforderungen an die Bestandteile (Beton und weitere Baustoffe) für Fahrbahnbefestigungen aus Beton, die vor Ort hergestellt werden, fest. Mit Walzen verdichteter Beton wird nicht in diesem Dokument behandelt.
Dieses Dokument behandelt Fahrbahnbefestigungen aus Beton für Straßen und andere verkehrsbelastete Befestigungen.

Chaussées en béton - Partie 1 : Matériaux

Ce document spécifie les exigences concernant les constituants (béton et autres matériaux) des chaussées en béton coulé en place. Le béton compacté au rouleau n'est pas couvert par ce document.
Ce document concerne les chaussées en béton et toutes autre structures supportant une circulation.

Betonska vozišča - 1. del: Materiali

General Information

• Status: Not Published
• Publication Date: 22-Oct-2023
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 24-Aug-2023
• Due Date: 02-Dec-2022
• Completion Date: 24-Aug-2023
• Ref Project: kSIST FprEN 13877-1:2023 - Concrete pavements - Part 1: Materials

Relations

• Revises: EN 13877-1:2013 - Concrete pavements - Part 1: Materials
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13877-1:2022
01-marec-2022
Betonska vozišča - 1. del: Materiali
Concrete pavements - Part 1: Materials
Fahrbahnbefestigungen aus Beton - Teil 1: Baustoffe
Chaussées en béton - Partie 1 : Matériaux
Ta slovenski standard je istoveten z: prEN 13877-1
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 13877-1:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13877-1:2022

---------------------- Page: 2 ----------------------
oSIST prEN 13877-1:2022


DRAFT
EUROPEAN STANDARD
prEN 13877-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

January 2022
ICS 93.080.20 Will supersede EN 13877-1:2013
English Version

Concrete pavements - Part 1: Materials
Chaussées en béton - Partie 1 : Matériaux Fahrbahnbefestigungen aus Beton - Teil 1: Baustoffe
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13877-1:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13877-1:2022
prEN 13877-1:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Requirements for constituent materials of concrete . 5
4.1 General . 5
4.2 Type of cement . 6
4.3 Aggregates . 6
4.3.1 General . 6
4.3.2 Maximum size of aggregates . 6
4.4 Mixing water . 6
4.5 Other constituent materials . 6
5 Basic requirements for concrete . 6
5.1 General . 6
5.2 Fresh concrete . 6
5.2.1 Consistence . 6
5.2.2 Air content . 7
5.2.3 Cement content . 7
5.2.4 Content of particles smaller than 0,250 mm . 7
5.2.5 Chloride content . 7
5.3 Hardened concrete . 7
5.3.1 Resistance to the effects of freeze–thaw and de-icing agents . 7
5.3.2 Mechanical strength . 7
6 Basic requirements for other materials for concrete pavements . 9
6.1 General . 9
6.2 Curing materials . 9
6.3 Surface retarders . 9
6.4 Joint sealants. 10
6.5 Tie bars . 10
6.6 Dowels . 10
6.7 Reinforcing bars . 10
6.8 Reinforcing fibres . 10
Bibliography . 11

2

---------------------- Page: 4 ----------------------
oSIST prEN 13877-1:2022
prEN 13877-1:2022 (E)
European foreword
This document (prEN 13877-1:2022) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13877-1:2013.
In comparison with the previous edition, the following technical modifications have been made:
— the normative references have been updated;
— the scope has been adapted;
— lean concrete has been removed;
— the requirements on the density of fresh concrete have been removed;
— the steel fibres have been included in the definition of reinforcement;
— the notes in Table 1 have been updated;
— Table 3, Dimensions for tie bars, has been removed;
— EN 197-1, prEN 13863-6 and EN 14889-1 have been added to the normative references;
— the Bibliography has been deleted.
EN 13877, Concrete pavements, is currently composed with the following parts:
— Part 1: Materials
— Part 2: Functional requirements for concrete pavements
— Part 3: Specifications for dowels to be used in concrete pavements
This European standard refers to EN 206. In accordance with the scope of EN 206 some additional or
different requirements are necessary for pavements, particularly to comply with safety of users,
durability, environment and health.

3

---------------------- Page: 5 ----------------------
oSIST prEN 13877-1:2022
prEN 13877-1:2022 (E)
1 Scope
This document specifies requirements for the constituents (concrete and other materials) of concrete
pavements, cast in situ. Concrete compacted by rollers is not covered by this document.
This document covers concrete pavements for roads, airfields, pedestrian footpaths, cycle tracks, storage
areas, and in general for all traffic-bearing structures.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 197-1, Cement — Part 1: Composition, specifications and conformity criteria for common cements
EN 206, Concrete — Specification, performance, production and conformity
EN 1008, Mixing water for concrete — Specification for sampling, testing and assessing the suitability of
water, including water recovered from processes in the concrete industry, as mixing water for concrete
EN ISO 9227:2017, Corrosion tests in artificial atmospheres — Salt spray tests (ISO 9227:2017)
EN 10080, Steel for the reinforcement of concrete — Weldable reinforcing steel — General
EN 10025-2, Hot rolled products of structural steels — Part 2: Technical delivery conditions for non-alloy
structural steels
EN 10060, Hot rolled round steel bars for general purposes — Dimensions and tolerances on shape and
dimensions
EN 12350-7, Testing fresh concrete — Part 7: Air content — Pressure methods
EN 12390-3, Testing hardened concrete — Part 3: Compressive strength of test specimens
EN 12390-5, Testing hardened concrete — Part 5: Flexural strength of test specimens
EN 12390-6, Testing hardened concrete — Part 6: Tensile splitting strength of test specimens
EN 12620, Aggregates for concrete
prEN 13877-2, Concrete pavements — Part 2: Functional requirements for concrete pavements
EN 13877-3, Concrete pavements — Part 3: Specifications for dowels to be used in concrete pavements
prEN 13863-6, Concrete pavements — Part 6: Test method for the determination of the tensile strength of
concrete on cylindrical discs
EN 14188-1, Joint fillers and sealants — Part 1: Specifications for hot applied sealants
EN 14188-2, Joint fillers and sealants — Part 2:
...