EN 13877-1:2013

Concrete pavements - Part 1: Materials

This European Standard specifies requirements for:
-   the constituents (concrete and other materials) of concrete pavements;
-   the properties of fresh and hardened concrete.
This European Standard is applicable to concrete pavements cast in situ. Concrete compacted by rollers is not covered by this European Standard.
This European Standard covers concrete pavements for roads, motorways and airports, pedestrian footpaths, cycle tracks, storage areas, and in general all traffic-bearing structures.

Fahrbahnbefestigungen aus Beton - Teil 1: Baustoffe

Diese Europäische Norm legt Anforderungen fest an:
-   die Bestandteile (Beton und weitere Baustoffe) für Fahrbahnbefestigungen aus Beton;
-   die Eigenschaften von frischem und erhärtetem Beton.
Diese Europäische Norm gilt für Fahrbahnbefestigungen aus Beton, die vor Ort hergestellt werden. Mit Walzen verdichteter Beton wird nicht in dieser Europäischen Norm behandelt.
Diese Europäische Norm behandelt Beton für Straßen, Autobahnen und Flugplätze, Fußgängerwege, Fahrradwege, Lagerplätze und im Allgemeinen für sämtliche verkehrsbelastete Befestigungen.

Chaussées en béton - Partie 1: Matériaux

La présente Norme européenne spécifie les exigences concernant
⎯ les constituants (béton et autres matériaux) des chaussées en béton,
⎯ les propriétés du béton frais et durci.
Le présent document est applicable aux chaussées en béton coulé en place. Le béton compacté au rouleau
n'est pas couvert par ce document.
Le présent document concerne les chaussées pour routes, autoroutes, aéroports, rues piétonnes, pistes
cyclables, zones de stockage et, en général, toutes les structures supportant une circulation.

Betonska vozišča - 1. del: Materiali

Ta dokument določa zahteve za sestavne dele (iz betona in drugih materialov) betonskih vozišč ter lastnosti svežega in strjenega betona. Ta dokument velja za betonska vozišča, ulita na kraju samem. Beton, utrjen z valji, ni obravnavan v tem dokumentu. V tem dokumentu so obravnavana betonska vozišča za ceste, avtoceste in letališča, površine za pešce, kolesarske poti, območja skladiščenja in na splošno vse strukture, po katerih poteka promet.

General Information

• Status: Withdrawn
• Publication Date: 26-Mar-2013
• Withdrawal Date: 31-Oct-2023
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 3 - Materials for concrete roads including joint fillers and sealants
• Ref Project: SIST EN 13877-1:2013 - Concrete pavements - Part 1: Materials

Relations

• Replaces: EN 13877-1:2004 - Concrete pavements - Part 1: Materials
• Effective Date: 03-Apr-2013
• Replaced By: EN 13877-1:2023 - Concrete pavements - Part 1: Materials
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Fahrbahnbefestigungen aus Beton - Teil 1: BaustoffeChaussées en béton - Partie 1: MatériauxConcrete pavements - Part 1: Materials93.080.20Materiali za gradnjo cestRoad construction materials91.100.30Beton in betonski izdelkiConcrete and concrete productsICS:Ta slovenski standard je istoveten z:EN 13877-1:2013SIST EN 13877-1:2013en,fr,de01-maj-2013SIST EN 13877-1:2013SLOVENSKI
STANDARDSIST EN 13877-1:20051DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13877-1
March 2013 ICS 93.080.20 Supersedes EN 13877-1:2004English Version
Concrete pavements - Part 1: Materials
Chaussées en béton - Partie 1: Matériaux
Fahrbahnbefestigungen aus Beton - Teil 1: Baustoffe This European Standard was approved by CEN on 10 February 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13877-1:2013: ESIST EN 13877-1:2013

3.4 curing compound product that can be applied on the surface of newly placed concrete to minimize the loss of moisture and in the case of pigmented compounds to reflect heat minimizing heating up of the concrete 3.5 dowel coated smooth steel bar which extends into adjoining slabs at a joint in a concrete pavement, to improve load transfer and to avoid faulting 3.6 tie bar steel bar used to keep joints closed, normally longitudinal joints, in a concrete pavement 3.7 reinforcement steel bars or steel meshes embedded in concrete to control cracking and/or to provide tensile capacity 3.8 calculated density of fresh concrete density calculated from mass of all materials batched and the total absolute volume of the constituent materials 4 Requirements for constituent materials of concrete 4.1 General Only constituent materials permitted in EN 206-1 shall be used. The constituent materials for concrete shall be selected to satisfy the specified requirements of this document for fresh and hardened concrete including consistence, density, strength, durability, and protection of embedded steel against corrosion. Where there is no European Standard for a particular constituent material which refers specifically to the use of this constituent material in concrete conforming to EN 206-1, the establishment of suitability may result from:  a European Technical Approval which refers specifically to the use of the constituent material in concrete conforming to EN 206-1; or SIST EN 13877-1:2013
...