prEN 17020-3
(Main)Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows – Part 3: Durability of self-closing of steel sliding doorsets
Extended application of test results on durability of self-closing for fire resistance and/or smoke control doorsets and openable windows – Part 3: Durability of self-closing of steel sliding doorsets
This European Standard covers the following types of steel based doorsets: horizontally sliding doorsets (single and double), telescopic doorsets (single and double) and single vertically sliding doorsets as covered by EN 15269 7.
This document prescribes the methodology for extending the application of test results obtained from durability self-closing test(s) conducted in accordance with EN 1634 1.
Subject to the completion of the appropriate self-closing test or tests, the extended application may cover all or some of the following non-exhaustive list:
- integrity only (E), radiation (EW) or insulated (EI1 or EI2) classifications;
- door leaf;
- wall/ceiling fixed elements (frame/suspension system);
- glazing for door leaf;
- items of building hardware;
- decorative finishes;
- intumescent, smoke, draught or acoustic seals;
- alternative supporting construction(s).
Erweiterter Anwendungsbereich von Prüfergebnissen zur Dauerhaftigkeit des Selbstschließens für Feuerschutz- und/oder Rauchschutztüren und zu öffnende Fenster - Teil 3: Dauerhaftigkeit der Selbstschließung von Schiebetoren aus Stahl
Diese Europäische Norm deckt die folgenden Arten von Stahltoren ab: horizontal öffnende Schiebetore (ein- oder zweiflügelig), Teleskoptore (ein- oder zweiflügelig) und von einer Seite aus vertikal öffnende Schiebetore, wie von EN 15269-7 abgedeckt.
Dieses Dokument schreibt die Methodik zur Erweiterung der Anwendung von Ergebnissen aus Dauerhaftigkeits-Selbstschließungsprüfungen, die nach EN 1634 1 ausgeführt wurden, vor.
In Abhängigkeit von der Durchführung der entsprechenden Prüfung oder Prüfungen zur Selbstschließung, kann der erweiterte Anwendungsbereich einige oder alle Bereiche der nachstehenden unvollständigen Liste abdecken:
Klassifizierung für nicht wärmegedämmte Abschlüsse (E), Abschlüsse mit Anforderung an Strahlung (EW) oder wärmegedämmte Abschlüsse (EI 1 oder EI 2);
Türblatt;
an der Wand/Decke befestigte Elemente (Zarge/Aufhängungssystem);
Türblatt-Verglasung;
Baubeschläge;
dekorative Beschichtungen;
Aufschäumende Dichtungen, Rauchschutzdichtungen, Zugluft- oder Schallschutzdichtungen;
Alternative Tragkonstruktion(en).
Application étendue des résultats d’essais de durabilité de la fermeture automatique des blocs-portes et fenêtres ouvrantes résistants au feu et/ou étanches à la fumée - Partie 3 : Durabilité de la fermeture automatique des blocs-portes coulissants en acier
La présente Norme européenne couvre les types suivants de blocs-portes à base d’acier : blocs-portes coulissant horizontalement (simples et doubles), blocs-portes télescopiques (simples et doubles) et blocs-portes simples coulissant verticalement visés par l’EN 15269-7.
Ce document établit la méthodologie d’extension de l’application des résultats d’essai obtenus suite aux essais de durabilité de la fermeture automatique réalisés conformément à l’EN 1634 1.
Sous réserve de la réalisation de l’essai ou des essais appropriés de fermeture automatique, l’application étendue peut couvrir tout ou partie des éléments de la liste non exhaustive suivante :
- classements d’étanchéité au feu uniquement (E), aux rayonnements (EW) ou à l’isolation thermique (EI1 ou EI2) ;
- vantail ;
- éléments fixes muraux/de plafond (structure/système de suspension) ;
- vitrage pour vantail ;
- tout élément de quincaillerie de bâtiment ;
- finitions décoratives ;
- joints intumescents, joints d’étanchéité aux fumées, joints d’étanchéité à l’air ou joints acoustiques ;
- autre(s) support(s).
Razširjena uporaba rezultatov preskusov trajnosti samozapiranja za požarno odporna in/ali dimotesna vrata in okna, ki se odpirajo - 3. del: Trajnost samozapiranja jeklenih drsnih vrat
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 17020-3:2016
01-september-2016
Razširjena uporaba rezultatov preskusov trajnosti samozapiranja za požarno
odporna in/ali dimotesna vrata in okna, ki se odpirajo - 3. del: Trajnost
samozapiranja jeklenih drsnih vrat
Extended application of test results on durability of self-closing for fire resistance and/or
smoke control doorsets and openable windows – Part 3: Durability of self-closing of steel
sliding doorsets
Application étendue des résultats d’essais de durabilité de la fermeture automatique des
blocs-portes et fenêtres ouvrantes résistants au feu et/ou étanches à la fumée - Partie 3 :
Durabilité de la fermeture automatique des blocs-portes coulissants en acier
Ta slovenski standard je istoveten z: prEN 17020-3
ICS:
13.220.50 Požarna odpornost Fire-resistance of building
gradbenih materialov in materials and elements
elementov
91.060.50 Vrata in okna Doors and windows
oSIST prEN 17020-3:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 17020-3:2016
---------------------- Page: 2 ----------------------
oSIST prEN 17020-3:2016
DRAFT
EUROPEAN STANDARD
prEN 17020-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2016
ICS 13.220.50; 91.060.50
English Version
Extended application of test results on durability of self-
closing for fire resistance and/or smoke control doorsets
and openable windows - Part 3: Durability of self-closing
of steel sliding doorsets
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 33.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17020-3:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 17020-3:2016
prEN 17020-3:2016 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Determination of the field of extended application . 7
4.1 General . 7
4.2 Procedure for evaluation . 7
4.3 Procedure for maximum field of extended application . 7
4.4 Interpretation of test results .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.